| Age | Commit message (Collapse) | Author |
|---|
|
The redundant qualifier was introduced in an erroneous rebase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This way 'make check' doesn't execute TestGitStorage anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we should see the output and hopefully be able to figure
out why that silly test keeps randomly failing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The device nodes are created for all DCs, when importing the
dives. There is no point in creating only the device node for
the first DC in fixup_dive().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the specuial case of suunto, where we may add a device directly
instead of via dive->dc, add the device to the provided table.
The caller will then pass on the new device to the undo system.
This makes downloading finally really undoable (at least I
hope so). So far, the dives and dive sites were removed, but any
new device remained.
However, when setting the device-id via serial, we now have
to check both, the global and the downloaded list of devices.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In one weird case (suunto), the code in libdivecomputer.c
generates a device node directly instead of going the usual
way (setting the data in the dc-structure of the imported
dive). It is unclear to me whether that has to be that way,
as it depends on the chronological order of callbacks to
event_cb() and dive_cb().
Therefore add a device_table pointer to device_data_t
so that the downloader can add the device to this table. This
only adds the pointer, but does not yet use it in the
downloading code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The same structure was defined as "struct dc_user_device_t"
and typedefed as "device_data_t". Unify this. Since there
are much more of the latter, remove the former.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
So far, we added a non-global device table to the parser states.
Now, create device nodes in that table instead of in the global
table. Thus, on undo of dive-import, the new device nodes will
be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In analogy to the xml-parser add a device-table to git's parser-state.
Currently this is unused. In upcoming commits the git parser will
then be changed to add device nodes in this table instead of the
global device table. The long-term goal being to detach the
parsers from global state and to make dive-import fully undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The function was misnamed in that it doesn't set the nickname
of a device. Instead, it adds all (unknown) devices of a
dive to the/a device-table. Let's call it appropriately.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This will be used to keep the model representing the device-list
up to date.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To include the device code in the undo system, we need functions
to check for the existence of devices and to add or remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If we want to avoid the parsers to directly modify global data,
we have to provide a device_table to parse into. This adds such
a state and the corresponding function parameters. However,
for now this is unused.
Adding new parameters is very painful and this commit shows that
we urgently need a "struct divelog" collecting all those tables!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No user of that member function!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The interaction of Qt's drag & drop with GroupedLineEdit was
exceedingly weird. The user was able to scroll the viewport
making the text invisible.
This implements a very primitive alternative drag & drop
functionality: dropped text is regarged as a distinct tag.
This means that it is not possible to modify existing tags
by dropping in the middle of them. Arguably, this might even
be better than arbitrary drag & drop. But even if not perfect,
this fixes a very nasty UI behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If the user manages to "scroll" through the QPlainTextEdit by
a drag&drop action, the state of the widget becomes inconsistent.
On the one hand, the text-block says that it has one line.
On the other hand, its layout says that it has no line.
When trying to fetch the line, a crash occurs.
Try to detect such a strange state and return early in
GroupedLineEdit::paintEvent().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Google play now requires that we show an explicit notification when turning
on background location. This is an attempt to fulfill that requirement - we
won't know if this is 'good enough' until we submit the app, though.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I don't recall why we removed that text, but this makes it much clearer
that the service is active.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This has been tested on Fedora 33 and openSUSE Leap 15.2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to need this when building our own libgit2 on older
distibutions. This shouldn't be needed anymore at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That was used by the old xml-params code, which was recently
replaced.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This fixes a load of memory holes, and makes the code
(hopefully) more readable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The XML-parameter code is a mess. Ownership is unclear. Allocation
and freeing of strings is in different functions. Sometimes
only every second string is free()d, because keys are not copied.
But this is done inconsistently. The caller has to know how
many parameters the callee may add.
Instead, let's add a small helper-struct that uses C++ memory
management, but exports a C-API. The array for the XML-library
is generated on the fly.
This is only the implementation, the old code is not yet replaced.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Apparently libdc gives us copies of strings. The API is very
scary, because (at least according to my reading of the code),
the key/value pair may be stored in a cache. Thus on free()ing
the string in the cache becomes invalid and we must not access
it twice. Very obscure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Recently, the sorting of the devices was changed to be
case-insensitive for models for consistency reasons. However,
then the equality-comparison should also be case-insensitive.
Break it out into its own function, to avoid that mistake
in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
For consistency with all the other clear_*_table functions
(dive, trip, dive_site, ...)
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When importing dive-sites we would add to the global filter-preset
table. This data should be thrown away, just like the other tables
that might be imported.
This shows that we really should introduce a "struct divelog",
which collects all those tables into a single structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We used a typedef "filter_preset_table_t" for the filter preset table,
because it is a "std::vector<filter_preset>". However, that is in
contrast to all the other global tables (dives, trips, sites) that we
have.
Therefore, turn this into a standard struct, which simply inherits
from "std::vector<filter_preset>". Note that while inheriting from
std::vector<> is generally not recommended, it is not a problem
here, because we don't modify it in any shape or form.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
filter_preset_table_t was defined as "void" for C code.
However, that meant that any pointer could be passed as
such a table and such a table could be passed as any pointer,
without generating compiler warnings.
Indeed, we had a parameter-mixup that went unnoticed.
Therefore, make filter_preset_t an anonymous structure with
the name filter_preset instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This fixes a warning from the CodeQL scan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we test a Qt 5.15 build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we test a Qt 5.14 build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On some systems it ends up in lib64 instead of lib.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Usually ldconfig isn't in the user's path.
Suggested-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code in core/libdivecomputer.c used string insensitive
comparison for device models, before being merged into core/device.c.
Let's reinstate that behavior, since it appears to be more logical.
On would assume that two different vendors will not use the same
model with different casing (and the same device-ids), so that
should be safe.
This uses strcoll to correctly sort unicode, which will hopefully
never be needed!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To search for devices with the same model, we used find_if().
However, that was only to check whether such a thing exists,
not to actually do something with said device.
Therefore, change this to std::any_of() to make it clear what
the purpose of the statement is.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of accessing the global device table directly, add a parameter
to all device-table accessing functions. This makes all places in
the code that access the global device table grep-able, which is
necessary to include the device-table code in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The core now loops over the devices directly - no need for this
callback.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We now can loop over devices from C and check for selection.
So let's get rid of the last user of the call_for_all_devices()
callback.
Code readability improvement is not stellar, but one less
place where we shoe-horn user data through a void-pointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We have a callback for all devices with a twist: it can loop
over those devices that are used by a selected dive. This is
used for exporting a subset of the dive log.
Factor out the "is device used by selected dive" part of the
function and make it available to C. The goal is to make
the whole callback thing unnecessary and let C code loop
directly over the device list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Now we can simply loop over the list of devices. In this case,
it's not much more readable, but at least we don't have that
nasty pass user-data through "void *" pattern.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was not used. Moreover, mark device::operator==() for removal.
This is used for detecting changes in the DiveComputerModel. This
can be removed once that is integrated into the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Searching the proper device for the divecomputer was done via a
callback. Very hard to follow code. Since we can now access
"struct device" from C, obtain it directly via get_device_for_dc().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The function getDCExact() was used to search for a device structure
matching a divecomputer. Since C code can now access struct device,
we can export that function to C. Rename it to get_device_for_dc()
for consistency with naming of the core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Up to now, "struct device" and "struct device_table" were C++
only, because they used C++ strings for convenience. Since we
switched from QString to std::string, we can create accessors
for these structs. For the C code, we simply declare them as
opaque structs and give the full definition only for C++.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since we converted from QString to std::string, let's also use
std::vector instead of QVector. We don't need COW semantics
and all the rigmarole. Let's try to keep Qt data structures
out of the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
struct device is a core data structure and therefore shouldn't use QString.
QString stores as UTF-16 (which is a very questionable choice in itself).
However, the real problem is that this puts us in lifetime-management
hell when interfacing with C code: The UTF-16 has to be converted to
UTF-8, but when returning such a string, this puts burden on the caller
who has to free it. In fact, instead of looping over devices from C-code
we had a callback that sent down temporary C-strings with qPrintable.
In contrast, std::string is guaranteed to store its data as
contiguous null-terminated and C-compatible strings. Therefore,
replace the QString by std::string. Keep the QString just in
one place that formats a hexadecimal number to avoid any
potential change.
The disadvantage of using std::string is that it will crash
when constructed with a NULL argument, consistent with C-style
functions such as strcmp, etc. Arguably, NULL is different
from the empty string even though we treat both as the same.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Berthold Stoeger
Dirk Hohndel