| Age | Commit message (Collapse) | Author |
|---|
|
You cannot be at two depths at the same time (and it confuses
the planner). So give yourself at least 10 seconds.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... at least for llvm.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When setting up a dive for replanning, we ignored zero length segments as those
tend to be generated by gas changes. But it is possible to enter those in the
planner and the replanning should not ignore those. So be
more clever about gas changes. Let's add 10 seconds so we are not at two depths
at the same time and help since add_stop also does not like zero length
segments (it thinks we are trying to replace a waypoint).
Fixes #2901
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Most (all?) BLE dive computers actually don't need to be paired, and some
apparently can't be paired. So let's not enforce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While this code was added as I was trying to work through issues with a BLE
stack that turned out to be broken, the failure behavior of that device showed
that Qt doesn't like it when we start discovering the details of
characteristics while it is still busy discovering services.
So instead of handling the services as we find them, let's instead wait until
we are done discovering services and then discover the details for all those
services.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This simply helps us see some possible errors while trying to talk to a device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There is no need to continue to look, and at least with the Shearwater
Peregrine having the scan run while we are trying to discover characteristics
appeared to cause issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I can no longer reproduce the case where this rescan was necessary.
So let's remove it as it causes additional wait time for BT/BLE users on macOS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They use that same UUID on the Peregrine as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
get_cylinder(d, i) is more readable than d->cylinders.cylinders[i].
Moreover, it does bound checking and is more flexible with respect to
changing the core data structures. Most places already used this accessor,
but some still accessed the cylinders directly.
This patch unifies the accesses by consistently switching to get_cylinder().
The affected code is in C++ and accesses the cylinder as reference or
object, whereas the get_cylinder() function is C and returns a pointer.
This results in funky looking "*get_cylinder(d, i)" expressions.
Arguably still better than the original.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The libdivecomputer internals changed for USB devices, and now we need
to scan the USB devices before calling libdivecomputer. That's the same
pattern as for USBHID and IRDA, so let's just regularize this all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
getFormattedCylinder() is a helper function to format a list
of cylinders. It had that weird logic that it would skip
cylinders without description unless it is the first, which
would instead be written as "unkown".
The reason was the old statically sized cylinder array,
where it wasn't clear if a cylinder was actually in use.
This became obsolete when switching to a variable size
cylinder array. Firstly, all cylinders in the array were added
by the user. Secondly, we now also support dives without
cylinders, i.e. the first cylinder is not any different from
the rest.
Thus, remove the logic and format any cylinder without
description as being of type "unknown".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Quite a few little changes lately that all deserve a new nobile app
release, and each release requires an updated version number.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will be required for Android updates over the next few weeks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the Oceanic Veo 4.0 & Pro Plus 4, the Sherwood Wisdom 4 and the
Tecdiving DiveComputer.eu to our list of known names.
The Oceanic Pro Plus X detection is simply moved to have the other names
in a more logical order.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
0249e12 split up the dive import logic in multiple steps. Thereby,
the one of the conditions for renumbering the imported dives (is
the last old dive numbered) got messed up: The first number of the
new dive was compared to the total number of old dives, which makes
no sense.
- Simply check for the number of the last existing dive (if any).
- Don't remember the number of old dives - the original table is
not modified anyway.
Fixes #2731
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old code wasn't wrong, and likely the compiler turned this into something
that wasn't really terrible... but yeah, 5 unnecessary calls to a helper
function just bugged me. And I think the new code is much easier to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We are usually showing pressures with localized group separator. And we made a
total mess out of things when then re-parsing those values. This caused us to
ignore start and end pressures in Subsurface-mobile when those were entered in
psi and included a group separator:
2,900psi was turned into 2.900psi which we then rounded to 0 mbar.
This fixes the problem by asking Qt to do the right thing instead of doing
stupid separator magic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A silly copy and paste error caused us to overwrite the gas mixes for
all the tanks with the gas mix in the first tank.
Fixes #2913
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The merge_events() function was subtly and not-so-subtly broken in a
couple of ways:
- in commit 8c2383b49 ("Undo: don't modify source-dives on merge"), we
stopped walking the event list after we merged the first event from a
dive when the other dive computer had run out of events.
In particular, this meant that when merging consecutive dives, the
second dive only had the first event copied over to the merged dive.
This happened because the original code just moved the whole old list
over when there was nothing left from the other dive, so the old code
didn't need to iterate over the event list. The new code didn't
realize that the pointer movement used to copy the whole rest of the
list, and also stopped iterating.
In all fairness, the new code did get the time offset right, which
the old code didn't. So this was always buggy.
- similarly, the "avoid redundant gas changes" case was not handled for
the "we ran out of events for the other dive computer" case.
This fixes both issues.
Cc: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Smtk2ssrf has a segfault which matches quite well glibc's
CVE-2019-6488 (except for the x32 part).
It came from a call to memcpy in mdb_ole_read() func, used to get the
header and the profile of a dive from the database.
May be it could be fixed in libmdb but Mdbtools project has been stalled
for the past 5 years so ...
The segfault seems to be triggered by an empty profile in the first dive
in the database (a pretty common case in older Aladin DCs due to their
little memmory). The only special thing here is the fact it's the first
dive in the database structure (not the first by its index).
We can avoid the crash if we don't call mdb_ole_read_full() func on zero
sized profile field.
The problem here is we can't get the size of the fields and build the
MdbColumn in the same roud. Happily we just need the MdbColumn struct
for the dive profile and header. So, we can change the previous approach
using MdbColumns through almost all functions to a simpler one using the
already bounded strings by smtk_open_table() and just using the
col[n]->bind_pointer in the main function where the columns are built to
be used by mdb_ole_read_full().
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
|
|
Subsurface build needs install-root path to link libdc
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
|
|
So far, if the conversion process failed, we simply returned
an empty file. Now, we report that something's wrong.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It appears that multi line attributes silently fail. Without this change, the Download
button is enabled if vendor and product are chosen, even if there isn't a connection
selected. With this change (having all three conditions on the same line) the code
works as expected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was supported in libdivecomputer, but not recognized as dive computer by
our core BLE code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The last user of that argument has been removed.
(a random whitespace fix snuck in with this)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
gettimezoneoffset() returns incorrect values when called with a time_t.
Since we only accept the value here if it is within 5 minutes of 'now',
using the current timezone offset is a fair approximation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For some reason we suddenly started logging the GPS fixes in UTC instead
of local time. Which caused the matching algorithm to fail (unless you
happened to be diving in UTC). Unclear what broke this, but this seems
like an easy enough fix, since the GPS fix being reported is by
definition "right around now". So using gettimezoneoffset() with the
current time seems "good enough".
I don't know when gettimezoneoffset() with an argument got broken, TBH.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A while ago, we introduced a preference whether O2 should
be considered narcotic. We used this when computing
best mix or when entering the He content via MND. But
we forgot to make the displayed MND depend on this
preference. This patch add this.
Fixes #2895
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
When removing the MAX_CYLINDERS restriction, the layout of the
pressure readings was changed from a (cylinder,sample) to a
(sample,cylinder) scheme. I.e. previously there were one cylinder
block for each sample, then one sample block for one cylinder.
However, after populating the samples, the array size was reduced
to the actual number of used samples. With the new layout this
breaks indexing. Therefore, restore the old layout.
Fixes #2887
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We did something really horribly wrong when merging cylinders. It's
been broken since commit 7c9f46a ("Core: remove MAX_CYLINDERS
restriction"), and used some really strange logic.
This rewrites the logic to be (I think) a bit more easy to understand.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This updates libdivecomputer to support the Oceans S1 and McLean Extreme
divecomputers.
It also adds the Oceans S1 to the list of dive computers we reconize by
bluetooth name.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
[Dirk Hohndel: switched back to our docker hub repo]
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- use hidapi grantlee and mdbtools from MXE
- update MXE version to use QT 5.15, and pull in libzstd and CMake 3.17.3
- fix linking of winmm on windows build with new mxe
- add some instructions on building the container
- add some new dependancies from QT 5.15 to the packaging
- add a patch to MXE to Build qtconnectivity with native-win32-bluetooth
[Dirk Hohndel: small refactor]
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having the full list of all members in the exact order should be enough to get
g++ to accept the named initializers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The last time those changed, we forgot to update serial_ftdi. In that change
set_latency had been removed from libdivecomputer and poll and ioctl had been
added. This caused the callbacks to no longer be aligned correctly and the
functions were called with the wrong arguments through the wrong function
pointers, leading to crashes.
Instead of the fragile assumptions about order and type of function pointers,
use named initializers. And while we are at it, fix that for the bluetooth
implementation as well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For unknown reasons, the dive site and trip to be parsed into were
passed as pointers to pointers. A simple pointer seems to be enough,
since the object is not allocated by the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems like the easiest way to show the state without disrupting the UI
elsewhere. Directly below the email address used for cloud storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
Dirk Hohndel
Berthold Stoeger
Linus Torvalds
Salvador Cuñat
Paul Buxton