| Age | Commit message (Collapse) | Author |
|---|
|
This check make no more sense since cylinder editing is now
treated by undo commands.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
add() and remove() are not used anymore since this is done using
undo commands. The planner uses CylindersModel instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The CHANGED macro was defined in the cleanerTableModel header.
Since it had only one user, expand it there. The macro was very
questionably anyway, as it would set the local "vString" variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
A small code consolidation:
With one exception, all targets of the switch statement would
test for CHANGED(). Instead do the test once and exit early.
This changes the behavior of the function: if not changed, there
will be no more dataChanged-signal. However, this appears to be
the correct thing to do anyway. And it is easily changed if
it matters after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Cylinder-editing is controlled by undo (either by saving a planned
dive or by using the equipment tab). There is no point in setting
the dive_list_changed flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Nobody is testing that flag anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since cylinders are now edited using the undo system, these
functions are not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
React to signals from the undo-commands and update the
model accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is only called from the planner. Therefore, the test is
redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of connecting to the remove() function of the model,
call the removeCylinder undo command. Take care to translate
the index into the source index, should cylinders be hidden!
Apart from the map-to-source call, this copies the weightsystem
code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The undo-code must take care not to remove used cylinders.
To do so, extend the constructor of EditCylinderBase,
which collects the cylinders and dives to edit, by the
"nonProtectedOnly" boolean argument. If true, only those
cylinders for wich "is_cylinder_prot" returns false
will be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The cylinders in the events must be reordered if we remove
a cylinder. To avoid duplication of code, move the reordering
function into qthelper.cpp, though it might not be ideal
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Access the number of cylinders in the dive directly instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The CylinderModel always accessed the global "displayed_dive" and in
some special cases also "current_dive". To implement cylinder undo,
the model should work on an arbitrary dive. Therefore, in analogy
to the weight model, make the dive dynamic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Do a simple copy & paste followed by a simple search & replace
to generate cylinder undo commands from weight undo commands.
Obviously, this is still missing the necessary code to keep
the dive-data consistent after cylinder editing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Moreover, move the declaration from dive.h to equipment.h.
The result is a) more consistent and b) more logical.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Turn the code in CylindersModel that creates a new cylinder for
addition into its own function to avoid code duplication. This
will be used from the undo commands.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We have a set_weightsystem() function. For symmetry, introduce
a set_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The cylinder undo commands will keep a copy of a cylinder
and therefore need the ability to free a cylinder object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We have a clone_weightsystem function. For symmetry, introduce
a clone_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The weightsystem info for new weightsystem types is added by the
undo command. Remove this redundant code. Use the lookup only to
determine the weight and the canonical name (i.e. use the capitalization
according to the saved entry, in analogy to tanks).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the wightsystem-type and cylinder-type delegates, when entering
data, when entering known weight- or cylinder-types, some ui fields
(notably weight, size and working-pressure) are automatically filled
out. The search was using the default flags provided by Qt: starts-with
and case-insensitive.
This had a few strange effects, when entering a string that is the
beginning of a known string (e.g. "AL6" when "AL63" already exists):
1) The wrong data was used if the new string didn't exist.
2) For cylinders it was impossible to create new cylinder types whose
name is the starting string of a different type.
3) For weights, the new type was not added to the list of known types.
This, however, is no problem, because it will be added by the undo
command anyway. A future commit will address that redundancy.
Therefore use only the case-insensitive flag (which has to be performed
by passing the MatchFixedString flag - very weird).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user switches away from Subsurface-mobile and back while we are
in our initialization phase, that code might run more than once leading
to undesirable results.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The strange enum casts (that apparently we needed in order to have strongly typed
enums in QML) are really ugly and confusing in the code. Since we had this three
times it seemed worth to create a little helper that hides this nonsense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We know that we have valid credentials, so calling openLocalThenRemote()
makes no sense, worse, it doesn't respect the special case of
transitioning between accounts. That's the whole point of having a
separate loadDivesWithValidCredentials() call.
Once we have transitioned state, we need to record the now current state
as the old state so that future transitions will work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The noCloud variable contains our desired state, we need to test for the
previous state for this to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We haven't supported the GPS web service for a long time.
Also, add another message for the log to be able to more easily trace
one error case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we're using the undo stack for determining the whether there are
unsaved changes, we have to mark the undo stack as clean after save.
This duplicates code from desktop. It is planned to unify this in
the near future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In analogy to desktop, also consider the state of the undo-stack when
testing for unsaved changes. This prevents us from missing changes.
This adds duplicate code, which will be unified in the near future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
These appear to be the only cases where we forgot to ensure data is
saved. And pastDiveData is currently not called as the UI to use it has
been removed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code was using the pre-editing dive site name, which appears
weird. Not sure if that was on purpose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
QMLManager::checkLocation() would only return true if the
dive-site itself was changed, not if the dive-site was set
to a different site.
Thus, in some cases edit events could be lost.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Calling saveChangesLocal() seems like the right thing to do, but it
doesn't do anything useful if the dive list hasn't been marked as
changed. The correct helper function to call is changesNeedSaving()
which makes sure we save the changes and update all UI information.
[Berthold: since this removes the last QML caller of saveChangesLocal()
we can make that function private.]
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way the launch screen is shown significantly shorter on a device,
and instead the user sees our progress notifications.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This test makes no sense on other platforms (and the log file text is
frankly confusing when not running on Android).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The older version stopped building for iOS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We have convinced ourselves that only the main thread will ever trigger
a save operation, therefore the locking is not needed (and it has
recently started to cause user problems where local changes aren't saved
to storage and get lost).
Fixes #2718
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
QML documentation recommends against using the cacheBuffer for longer
lists and doing more testing shows that this really doesn't help at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Small optimization that reduces the number of accesses to the underlying
model. Instead of evaluating the isInvalid member eight times per
delegate, we only check it once.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Without this check we'll show the 'Please tap the plus botton...'
notification during app initialization as we are showing the initial set
of messages - which makes no sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Especially with large dive logs this will prevent the user from thinking
that the app is hung.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Especially with large dive logs this will prevent the user from thinking
that the app is hung.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of not showing a notification until after we are done loading
the data into our models, tell the user that we are about to do that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Until the app is initialized, we have problems getting the 'floating'
passive notifications to show up and be useful. Instead update the user
by filling a text block on the otherwise empty initial page of the app.
Delay the switch to the dive list until the app is initialized and then
use the passive notifications again. While we are initializing also show
a busy spinner so the user doesn't think the app is hung.
As a side effect of this change, the dive list isn't shown until our
models are initialized. And strangely this causes every single possible
delegate to be instantiated. We can prevent that by not setting the dive
list model until after we are done setting up the model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This simply passes the text to the existing notification text mechanism.
The call to processEvents() ensures that Qt processes the UI events
after we updated the notification and that the user gets timely updates;
otherwise the UI might look like the app is hanging.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Especially on slower devices with a large dive list the startup time has
become really long. This callback allows us to give the user an idea of
what the app is doing during that time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Berthold Stoeger
Dirk Hohndel