| Age | Commit message (Collapse) | Author |
|---|
|
This extends on our current tooltip logic (which shows events when you
mouse over them) to show tooltips for the whole profile area.
If you mouse over an event, that is still shown in the tooltip, but
even in the absense of events, the tooltip will be active, and mousing
over the profile area will show the time, depth and pressure.
This can certainly be improved upon further, but even in this form it is
useful.
Fixes #9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
You can press the left mouse-button on the profile and drag the mouse
around to zoom in on a specific area. Releasing the mouse button unzooms.
Yeah, everybody wants rubber-banding, but I have reached the end of my
willingness to fight gtk for more details. Some day.
[Dirk Hohndel: changed this to use the right mouse button instead of the
left which seemed just terribly unnatural]
References ticket 9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just makes sure that the merged dive is properly selected, and
that we've saved the trip tree state so that the dive list repaints
nicely and with the newly merged dive selected after the merge.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Just that trivial, simple and cosmetic thing.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply add a dive option on bigger surface, whith bigger fonts.
The size isn't A4 nor A5, but the size used by some popular paper
divelogs.
The modification performs better if we transpose the profile and
the text of the dive, because, if the notes are very brief,we get
an excess of white space at the bottom of the print.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This introduces the notion of merging two disjoint dives: you can select
two dives from the dive list, and if the selection is exactly two dives,
and they are adjacent (and share the same dive trip), we support the
notion of merging the dives into one dive.
The most common reason for this is an extended surface event, which made
the dive computer decide that the dive was ended, but maybe you were
just waiting for a buddy or a student at the surface, and you want to
stitch together two dives into one.
There are still details to be sorted out: my Suunto dive computers don't
actually do surface samples at the beginning or end of the dive, so when
you stitch two dives together, the profile ends up being this odd "a
couple of feet under water between the two parts of the dive" thing.
But that's an independent thing from the actual merging logic, and I'll
work on that separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just re-organizes the dive merging code so that we expose a new
"merge_dives(a, b, offset)" function that merges two dives together into
one with the samples (and events) of 'b' at the specified offset after
'a'.
We'll want to use this if a dive computer has decided that the dive
ended (due to a pause at the surface), but we really want to just turn
the two computer dives into one long one with an extended surface swim.
No functional changes, but some independent cleanups due to the trip
simplifications.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't change any of the samples, we just don't plot (or consider for
dive time / mean calculations) the samples at the beginning or end of the
dive that are less than a certain threshold under water. Right now that's
an arbitrary 75cm which seems to Do The Right Thing(tm) for the dives I
tried this with - but I'm happy to look at other values if this causes
problems for people with dive computers I do not have access to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make depth to absolute pressure conversions consistent.
|
|
This ensures that we use consistent math to get the absolute pressure at a
certain depth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add the bookmark and heading events to the list of events not to be
simplified just because they are redundant - in both cases they are
about the user doing something explicit (like the gaschange), so even
if the data is otherwise identical, they should likely be saved.
That said, both events are kind of pointless (we don't actually seem
to save the heading value for the heading events, and bookmarks are
universally just due to user error in at least my case). But still..
This overly aggressive filtering was introduced in commit 6ad73a8f043b
("Improve logic handling events").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a couple of helper functions to manage dive trips
("add_dive_to_trip()" and "remove_dive_from_trip()") and makes those
functions do the trip statistics maintenance (trip beginning times,
number of dives, etc).
This was needed because the dive merge cases for multiple dive
computers showed some rather nasty special cases: especially if the
new dive information has been loaded into an XML file with trips
auto-generated, merging several of these kinds of xml files with
multiple dives in several overlapping trips would completely confuse
our previous code.
In particular, auto-generated trips that had the exact same date as
previous trips (because they were generated from the same dive
computer) really confused the code that used the trip timestamp to
manage the trips.
Adding the helper functions allows us to get the general case right
without having to have each piece of code that handles trip
information having to bother about all the odd rules. It will
eventually also allow us to make the dive trip data structures more
logical: right now the dive trip list is largely designed around the
odd gtk model handling, rather than some more higher-level conceptual
relationship with the actual dives.
But for now, this keeps all the data structures unchanged, and just
modifies them using the new helper functions.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This requires a patched libdivecomputer that can return salinity of the
water the dive was conducted in. Experimental patches exist that implement
this for the OSTC. The code is designed so that it simply defaults to salt
water if libdivecomputer doesn't include the feature.
The patch also fixes the dive merge code to merge two other recent
additions to the dive structure (surface_pressure and visibility).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The tec diving preference pane now allows us to set a partial pressure
threshold for each of the three gases. When the partial pressure surpasses
that value, the graph becomes red.
Fixes #12
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The default filename handling is broken in two different ways:
(a) if we start subsurface with a non-existing file, we warn about
the inability to read that file, and then we exit without setting the
default filename.
This is broken because it means that if the user (perhaps by mistake,
by pressing ^S) now saves the file, he will overwrite the default
filename, even though that was *not* the file we read, and *not* the
file that subsurface was started with.
So just set the default filename even for a failed file open.
The exact same logic is true of a failed parse of an XML file that we
successfully opened. We do *not* want to leave the old default
filename in place just because the XML parsing failed, and possibly
then overwriting some file that was never involved with that failure
in the first place. So just get rid of all the logic to push the
filename saving into the XML parsing layer, it has zero relevance at
that point.
(b) if we do replace the default filename with a NULL file, we need
to set that even if we cannot do a strdup() on the NULL.
This fixes both errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we fill the cylinder information in an imperial unit world, a
working pressure of zero is a special case, and forces us to use the
actual physical size of the cylinder in liter, despite the fact that
we normally would use cuft.
However, we compare that value against zero in a 'double', and in
between going through the gtk spinbutton logic, the zero we have
filled in then gets read out as some very tiny epsilon value from the
gtk spinbuttons (typically in the 10**-317 range). This causes us to
think that the zero isn't actually a zero, because gtk has done odd
things with it.
Fix this by calculating the millibar value (as an integer) first, and
check that *integer* against zero. Any crazy epsilon values will have
been rounded away, and our logic works again.
There's a good reason why subsurface does everything using integers
(ie the afore-mentioned "convert to integer millibar" etc) and doesn't
use floating point for any core data structures, only for conversion.
FP rounding and inexact behavior can be really subtle.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we merge dives where the samples have come from different dive
computers, the samples may be offset from each other due to the dive
computers not having decided that the dive starts at quite the same
time.
For example, some dive computers may take a while to wake up when
submerged, or there may be differences in exactly when the dive
computer decides that a dive has started. Different computers tend to
have different depths that they consider the start of a real dive.
So when we merge two dives, look for differences in the sample data,
and search for the sample time offset that minimizes the differences
(logic: minimize the sum-of-square of the depth differences over a
two-minute window at the start of the dive).
This still doesn't really result in perfect merges, since different
computers will give slightly different values anyway, but it improves
the dive merging noticeably. To the point that this seems to have
found a bug in our Uemis data import (it looks like the Uemis importer
does an incorrect saltwater pressure conversion, and the data is
actually in centimeter, not in pressure).
So there is room for improvement, but this is at least a reasonable
approximation and starting point.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This enables plotting the ceiling in deco dives and also adds the
necessary code to the uemis importer. The only other dive computer this
has been tested with the OSTC and that needs a libdivecomputer patch in
order to provide the deco/ceiling information to Subsurface.
Fixes #5
|
|
We now throw away redundant events, just as we throw away other redundant
data coming from the dive computer. Events are considered redundant if
they are less than 61 seconds apart and identical.
This also improves the display of the remaining events in the profile as
we now show the value of the event, if it is present (for example for a
deco event we show the duration of the deepest stop).
Finally, for events that define a range (so they set the beginning flag
and assume and end flag some time later) we no loger show the triangle but
assume that some other code handles visualizing them (as happens for the
ceiling events).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is actually stored in minutes (which seems odd, given they allocate
16 bits for it... how much deco do these people want to be prepared for??)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This has been around for a loooong time, I just happened to stamble across
it when reading the code...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dive data contains the surface pressure prior to the dive, and that is
what we need to compare p_amb_tol to, not the standard 1013mbar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The hold_depth field is rather misleading as it normally gives the safety
stop depth and only when the p_amb_tol goes "below the surface" does it
switch to showing the first deco stop depth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Based on suggestions from Linus (and a few iterations) we now simply have
the surface (i.e., background color / pattern) come down to where the
ceiling is. And we only do the angry red shading when the diver violates
the ceiling.
I think this looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When the user closes the divelist and starts with an empty file it makes
no sense to assume that she only wants to download new dives since the
last time dives have been downloaded. So if the current divelist is empty
we ignore that information and start from the beginning again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Plot a red-shaded area on top of the depth profile to indicate the deco
ceiling (i.e., the area into which it isn't save to ascend at this point
of the dive.
So far this is of very limited use as libdivecomputer doesn't give us the
necessary information to plot this. I have sent patches for the OSTC to
Jef, hoping that he will include them in an update. I don't know how many
other dive computers will make this data available - I still need to add
this to our native Uemis support.
This commit also fixes two cut and paste errors in the previous commit
6540be9bd924 "Process ceiling events and store ceiling data in plot_info".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just creates the infrastructure but doesn't yet do anything useful
with the data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to have very spotty logic for picking the dive trip when
merging two dives. It turns out that that spotty logic almost never
really matters, because in practice you'll never hit the situation of
merging two dives with different dive trips, but it *can* happen.
In particular, it happens when you use multiple dive computers, and
end up loading the dives from one computer on top of the dives of your
other computer. If the clocks of the dive computers was set
sufficiently close to each other, the dive merging logic will kick in
and you may now have slightly different times for the dives that get
merged, and the trip merging logic got *really* confused.
The trip management also depends on the trip dates being updated
correctly when the dives associated with a trip are updated (whether
added or removed), and the trip merging code did none of that.
This fixes it all up. Hopefully correctly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing implementation failed on dive computers that did gas changes
based on events (instead of tracking them in the sample data like the
Uemis Zurich does that I tested the code with).
This commit moves the calculations slightly later in create_plot_info()
after the gas change events are processed and the plot_info data has been
fixed up. Now this works with the data from Linus' Suunto as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Plotting pO2 / pN2 / PHe
|
|
The pN2 print shouldn't have been committed, but I don't want to try and
rewrite all the commit history. Oh well.
The pressure scale I am ambivalent about. It seems that it should be
useful - but that would require guide lines that coincide with the values
which would really throw off the visual for me. So I added the code, but
left it disabled.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I can't remember why we initially did this instead of ending the
horizontal red line whith the last data point of the pressure profile. But
especially nuw with more graphs shown the one line that extends past the
end of the dive looked really silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We always want to print absolute maxima and minima - but not when multiple
consecutive data points all have the same value (this happens, for
example, when printing a pHe plot on non-helium dives - or when the dive
profile includes a brief surface intervall which causes all the partial
pressures to be at their minimum).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Whatever I pick here, there will be dives where the different graphs end
up interfering with each other. I don't think there isn't an easy, generic
solution for this (but I can envision awesome non-easy solutions - they
just don't seem to be worth the effort).
But for most dives that I played with this seems to work pretty well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was introduced in commit ee803ef5d85b "Change preferences into a
notebook and add second page for tec settings"
In order to be able to get the new default XML file name back from the
button, we need to keep that variable around and not overwrite it with
more buttons for the tec preferences page.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the import thread is running it is possible to:
1) click the [x] button of the "download dialog".
To prevent that, we attach a "delete-event" signal to no-op function.
2) to interact with the main window, once the "accept" event is triggered.
To prevent that, we make sure that the window is set back to "modal".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On Windows, device names can end up being <drive-letter> (<drive-label>).
In such a case we are only interested in the <drive-letter> part, when
passing this value to libdivecomputer.
This patch provides a method to trim all text in parentheses and also
any leading and trailing whitespace.
An important addition is enabling back the user to enter a device
manually even it's absent in the combo box list. This device is
then stored and retrieved as the default device, but not stored
in the device list (dc_device_selector()).
As a side effect this change prevents the download dialog closing,
when a user-entered device is not one of the found devices via
subsurface_fill_device_list().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Lubomir's commit aec904b612cbee57f8bb5c3289a120b69c9ade24 broke the Add
Dive menu item: The Edit Dive dialogue didn't show up after the initial
dialogue.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Dirk's commit 2de6f796354ad029e9e786027210fcf1b02868e2 had a typo.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Pablo Garcia Castro <freixido@gmail.com
Signed-Off-By: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Jose Angel Tortosa Delfa <angeltordel@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The algorithms attempt to identify "interesting" points where the user
might want to know the value of the graph.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Adjust the color for pN2 to the standard for this gas (black). We keep pO2
green (even though the ISO 32 color for that would be white). pHe is
marked in brown (which is the matching standard color).
Calculate correct partial pressures for the synthetic plot info points at
the beginning and end of the dive.
Minor fine tuning to the positioning / scaling of the temperature plot
when partial pressures are plotted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So few of my dives are on air that at first I didn't notice - but for
those dives we set the o2 permille to 0 - which of course causes incorrect
(and extremely deadly) pO2 of 0...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fairly simplistic change that modifies the way we calculate the "maxdepth"
for a particular dive as that is used to scale the plot vertically.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Not sure this is the best naming scheme (General Settings / Tec Settings)
but it's a start.
The idea is to have the settings that a recreational diver might care
about on the first page, and all the other stuff on the second one. Let's
see how this works out long term. For now I moved OTU over and added
toggles for the different partial pressure graphs (only the pO2 one is
implemented so far).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far this is done unconditionally. This already starts some of the
infrastructure for other gases, but so far only O2 is handled.
We also need a pressure scale on the right to make this useful - or we
need to do peek / trough pressure prints like we do for temperature and
depth.
Finally, I think I want to move the plot further down, maybe make the
whole plot area taller if we are plotting partial gas pressures as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Bring the device selector (when downloading from a dive computer) into
master.
|
|
In the device selector when downloading from a divecomputer add the drive
name that we have been looking for (so far that's only "UEMISSDA") to the
drive letter - this should make it easier for people to figure out why
there is a drive letter offered as an option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
subsurface_fill_device_list() now goes trough the list of registry
entries in the SERIALCOMM key and adds all present values (such as
COM1, COM2) to a GtkListStore. Once done the function compares
all logic drive label to a static list of known DC labels,
such a 'UEMISSDA', which is the only present one at the moment
and adds any matching drive letters (e.g. C:\, H:\) to the list store
as well.
If no serial ports were added or no matching logical drives were found
the function simply adds a default entry named "COM1".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
Linus Torvalds
Dirk Hohndel
Salvador Cuñat
Lubomir I. Ivanov
Henrik Brautaset Aronsen
Pablo Garcia Castro