| Age | Commit message (Collapse) | Author |
|---|
|
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The cylinderList() function collects all cylinder descriptions.
Instead of adding all cylinders, then sort, then removed duplicates,
keep a sorted list and only add non-existing elements. Find
existing elements by a binary search.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The tab was crashing if there were no cylinders because
1) per_cylinder_mean_depth() would access non-existing cylinders.
2) TabDiveInformation::updateProfile() would access a non-existing
mean.
Fix both of these crash conditions by checking whether the dive
actually has cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
TankItem would happily access a non-existing cylinder and crash.
But freedives for example have no cylinders. Thus, handle that
situation gracefully by exiting early if there is no cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In getFormattedWeight() and getFormattedCylinder(), the indexes
were passed as unsigned ints. This makes no sense as the only
callers were using signed ints. Change the parameters to signed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
As a convenience, return the cylinder from add_empty_cylinder()
to spare the caller from the nasty expression to fetch the
last cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Most callers of this function accessed the newly generated cylinder
immediately after calling this function. Thus, for convenience,
return the added cylinder. This avoids a number of verbose expressions.
On the flip side, cylinder_start() now has to be cast to
function returning void in a the "nesting" function table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In qt-models/cylindermodel.cpp the various formatting functions
can take a pointer-to-const cylinder. Thus, the data() function
can likewise treat the cylinder as const - as it should.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Thus, future callers will not have to include the monster dive.h
include if they just want to copy cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Move the loop body of copy_cylinder_types() into its own function.
When using variable sized arrays, this loop will have to treat two
cases (overwrite cylinder and add new cylinder), so that makes things
more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
merge_cylinders() used three bitmaps to identify cylinders used in
the first and second dive and matched cylinders. Even though nobody
will use more than 32 (or 64!) cylinders, replace these with
dynamically allocated bool-arrays for consistency with the rest
of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When calculating per-cylinder mean depths, bitfields were used to
keep track of "used" and "known" cylinders. Even though no sane
person will use more than 32 cylinders, turn this into dynamically
allocated arrays of bool for consistency with the rest of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Some widgets copy the full plot info. Free these data on exit to
prevent monstrous valgrind reports.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To calculate sac rates, an array of used gases for every point on the
profile was used. This was implemented using unsigned int bitfields.
While nobody sane will ever use 32 or even 64 cylinders, for consistency
with the rest of the code, also change this to use dynamically
allocated arrays.
But allocate only once per shown profile, not once per sample.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
All accesses to the pressure data were converted to use functions.
Therefore it is now rather trivial to dynamically allocate the
pressure array and just change the functions.
The only thing to take care of is the idiosyncratic memory
management. Make sure to free and copy the buffer in the
appropriate places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The model was accessing the pressure data directly. Instead,
use the accessor functions so that the core structure can
be changed more easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The save_profiles_buffer() function was accessing the pressure
data directly. Instead, use the already existing funcions to
make transition to dynamically allocated pressure data more
seamless.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The pressure data was directly accessed in fill_missing_tank_pressures().
Use the already existing functions so that the structures can be adapted
easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The only apparent reason that this was a macro is that it automatically
increased the "index" and "entry" counts. But incrementing these explicitly
seems reasonable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Another plot-pressure-related function whose argument is converted
to an index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Continue with replacing pointers to struct plot_data entries
by indexes. Thus the pressure data can be kept in its own
array and can by dynamically sized.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The ProfileWidget2::getEntryFromPos() function was only used
by code that was commented out. Thus comment it out as well.
Moreover, turn the accompanying FIXME comments into TODO comments
to avoid a new LGTML alert.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The goal here is to make it possible to detach the pressure related
data from the plot_info structure. Thus, the pressure related data
can be allocated independently depending on the number of cylinders
per dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To make the pressure data dynamic (size of the arrays depending
on the cylinders in the dive), it has to be separated from the
standard plot_data structure. To enable this, use indexes instead
of pointers to plot_data elements. This commit converts
the RulerItem2 to use an index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
User beginResetModel()/endResetModel() pairs to reset the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using a sub-array, use a std::vector<>. This is
a necessary step in removing the MAX_CYLINDERS restriction.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Dynamically allocate cylinder arrays in C code. This is a tiny
step in removing the MAX_CYLINDERS limitation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When keeping track of cylinder related data, the code was using
static arrays of MAX_CYLINDERS length. If we want to use dynamically
sized cylinder arrays, these have to be dynamically allocated.
In C++ code, this is trivial: simply replace the C-style arrays
by std::vector<>. Don't use QVector, as no reference counting or
COW semantics are needed here. These are purely local and unshared
arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
libssh2 depends on openssl, therefore it is important that openssl is
build before libssh2.
The old get-deps would cause errors in 2 situations:
1) In a clean build, make of libssh2 would fail
2) In a normal build, where openssl changed version, make of libssh2 would
depend on old build.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
This is even harder because setActiveTrip is called from an action slot from
QML. If the C++ code called from that slot causes the object to which this slot
belongs to be destroyed, we get very strange crashes. The only workaround I
could come up with was to update the filter asynchronously.
This all seems very ugly and fragile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we change the filter string, we need to make sure that the collapsed model is
also aware of the change.
Similarly, instead of just calling resetFilter and directly changing the core
data structures, we need to set the filter to the empty string which ensures
that all three models get notified and the view updates correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This caused a blank, unusable dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The number of different ways we tried to refer to the model made my head spin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This shouldn't be necessary every time we replace the sort model,
but it can't hurt, either (famous last words?).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This one significantly reduces the number of dives that are handed to the
ListView in QML. For every trip that isn't expanded (only zero or one trips are
expanded at any time, so almost all the others are collapsed), send only first
dive to the View to allow creation of the section. Hide the rest so we don't
have all these invisible, zero height entries for the vertical dive list.
A big part of this commit is moving a few functions from the DiveListSortModel
to the CollapsedDiveListSortModel. Those are the ones that are needed for the
trip header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The previous code assumes that both the vertical dive list and the list of dive
details which allows the horizontal swiping from dive to dive are based on the
same model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Memory is cheap these days. Still, this was wasteful. On a 64 bit machine we
went from 1620 to 1592 bytes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is only used in Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Allow showing that the app is busy and showing why at the same time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When called without arguments, no message is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Running Subsurface-mobile on iOS, the notification texts are sometimes very
hard to read, and in some situations the busy indicator isn't showing up at
all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes it much more consistent and avoids a silly warning.
Also some small README updates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the error that caused this to happen should be fixed, we should at least
let the user know if things failed catastrophically and we can't figure out how
to save their data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If there is a local cache, we at least once successfully accessed the cloud, so
this is a valid cloud based git tree.
Without this change we run into a subtle bug: after a fresh install, or when
switching users, when the cloud data is accessed the very first time, we don't
remember that this was indeed loaded from the cloud. So if we then download
from a dive computer or make any other changes to the dive log, we cannot save
those dives to cloud storage - but we fail silently doing so. Which to the user
would look that inexplicable data loss.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Berthold Stoeger
jan Iversen
Dirk Hohndel