| Age | Commit message (Collapse) | Author |
|---|
|
I'm not sure if Google used to show the POI marker at the center location in
the past or if this is actually a new feature. Either way this appears to do
the right thing in my testing.
Note that we need a 'plus' to connect the point of interest cooridnates,
but a 'comma' to connect the map center coordinates.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We have never made good use of the results. Let's just remove it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This code block was also for the OBS builds and is no longer needed now that we
have to separate make-package scripts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As commented by Berthold and Dirk for previous patches.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
|
|
Under some circustances values stored in this arrays may be NULL or even
previously freed. Check them to avoid further crashes.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
|
|
The d->cylinders created will be overriden by libdivecomputer parsing,
resulting in 0, 1 , may be 2 cylinders depending on DC data. This is not
what we want when importing a divelog, because we will miss all hand
entered tanks.
BTW, using get_cylinder() on tank number bigger than created, results in
a NULL pointer and a crash.
As we can't foresee how many tanks (or even it's positional numbers in
log) a diver has used, the full 10 tanks supported by SmarTrak can be
easily created and parsed using get_or_create_cylinder(), and unused
cleaned later.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
|
|
This brings the user manual in line with the recent changes to the
layout of the export panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
The previous version wasn't quite ready for prime time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This feels much cleaner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seemed very odd to have those steps mixed in with the Ubuntu/Debian
instructions. Yes, there is a bunch of overlap, but this seems much cleaner.
This also updates the spec files to something that works for the current
sources.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I keep forgetting to do that right after a release.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This cleans up a lot of the ancient mess in that file.
It's still confusingly usable to push sources to OBS as well (but that's now
hidden behind an option) and it is still somewhat custom-made for me, but it
should be much easier to reuse for others now.
In addition to Subsurface and libdivecomputer we are inclooding the googlemaps
sources and libgit2 1.0.0 sources. Bionic is the only remaining distro that we
support that doesn't have a new enough version of libgit2 (0.26 is the minimum
we expect), but since we are linking statically against it, maybe it's best to
simply force all of these builds to include libgit2 1.0.0.
Handling of the debian/* files in the script has been changed quite a bit to
make it easier for others to create a working setup. It now updates all of the
files with the exception of the changelog files from the sources we are
building from. I am hoping that this will be a not-so-subtle incentive for me
to keep the bundled versions up to date.
Since we no longer do beta releases, I removed that part from the file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We want to build this against its own regex package to avoid adding more system
dependencies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And acknowledge the current file format standard.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And remove an optional entry (which we would have to keep changing otherwise).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't want to try to track every change to this file in our source repo, so
this starting point is as goos as any.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Perform slight reorganisation and rewording of the divelog export
panel. Specifically the wording is changed and expanded to make clear
the 2 types of export of profile data. All the CSV export options are
grouped together. With respect to profile export to CSV format, it is
made clear that one option concerns export of dive computer-related
profile data, whereas the other option involves export of computed
dive profile data from the Dive Profile panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
Six images are changed and several changes are made to the text of the user manual
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Turns out that at least on Android libgit2 sometimes rejects valid
certificates. And I cannot quite figure out when and why. But since we
actually already checked the validity of the certificate when we called
canReachCloudServer() (and the Qt code handles certificates correctly),
we'll simply ignore this here and override the check to always return
true for our cloud server.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I would have bet money that Android used to send stderr to the logcat
log, but apparently it doesn't (anymore?). So in order to be able to
have a chance to debug weird cloud storage issues on Android, let's do
some wholesale replacement of fprintf(stderr,...) with our own version
of the INFO macro that we long ago borrowed from libdivecomputer (and
rename it to ensure we don't have a conflict there).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way the user can verify that they have set the log to verbose
mode in the developer menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The function to print a double did not print a comma while
the lines ended in a comma.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
free_plot_info_data() freed the pressure-data, but didn't set the
value to NULL. Thus, when the plot_info was reused, a double-free()
could ensue.
Crash condition: export the profiles of multiple dives with pressure
data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now have a much better way of dealing with the issue of colliding
tests inside the test.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We still need to support Qt 5.9 for Ubuntu 18.04 / Bionic. This uses
deprecated calls to qrand() - but then qrand() wasn't deprecated in 5.9.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old test was broken in many ways and kept failing for a number of
reasons. Some of them were addressed in the previous commits (the
missing HEAD ref being the main one), the other one was that the tests
kept stepping on top of each other - as were potentially random users or
reviewers using the 'universal' test account.
This uses a random one of ten dedicated test accounts, and on top of
that uses a random branch name (instead of the fixed email address
associated with the account).
This also rewrites several of the tests dealing with offline changes to
correctly model going offline (but keeps one that directly writes to the
local cache).
Finally this change also tries to do a much better job cleaning up after
itself and not leaving data behind the the next run could stumble over.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This helps the user figure out why we weren't able to write a tree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will be used by the test to clean up test branches that are created
on the server. Since we aren't testing that functionality (it's not
something that Subsurface itself ever does) the helper prints out errors
it encounters, but doesn't report them back to the caller.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If you had one of the unfortunate local git caches with a local HEAD
just pointing to 'master', this will make note of that and then fix it
up to use the proper branch name in the cache repository.
[Dirk Hohndel: demoted from error to fprintf as most users won't care]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In create_and_push_remote(), we set up the remote tracking etc to use
the proper branch name, but never actually set up the initial local
branch for the new cache repository at all. So the repository would end
up with the default 'master' branch, instead of the branch name it
should have.
This went unnoticed, because most setups start by initializing the git
caches by cloning from the cloud, and that worked fine.
Debugged-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some profilewidget classes hat protected members which can
be made private as there is no subclassing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There were a number of protected member functions in ProfileWidget2.
However no class subclassed ProfileWidget2, so this appears to have
been an artifact. Therefore, make these functions private.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In 9310d72943390f95d6742c2d5b40f025a40b4008, resetting of the dive
sites was moved to DiveTripModelBase::reset(). This seemed like a
good idea, because it means that the location list is reloaded
every time the dive list is reset.
Unfortunately that function is only used on mobile, thus on desktop
the dive site model is not updated. Do that in
MultiFilterSortModel::resetModel(), because this is always called
when the dive list is reset. Desktop differs from mobile in that
two different models are used depending on whether we are in list
or in tree mode.
Fixes #2749
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
That style-sheet made things look really ugly on most Linux themes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes a crash: when the undo commands removed a dive from
the list, the fulltext cache was not cleared. If now the divelist
is reset and then the undo-command deleted, deletion of the owned
dive tries to remove it's fulltext cache, which doesn't exist
anymore.
For reasons of symmetry, when readding the dive, its fulltext
has to be registered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Calling qApp->processEvents() in QMLManager::setNotificationText()
caused crashes, because it could lead to the context-menu that
initialized the call being deleted. Something that QML apparently
doesn't like.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On startup, we showed progress of the population of the fulltext
and listmodels for every 100th dive. This worked by overwriting
the last line if the new line started with '\r'. Since we don't
do that anymore, we can remove this special case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When initializing the fulltext-cache and the dive-list, every
100 dives a notification was shown. I had a feeling that this
made startup significantly slower, but that could have been
purely psychological.
Therefore I measured and indeed, removing the fine-grained
notification, it becomes *significantly* faster. For a 3500
dives test log with mobile-on-desktop:
Initialization of the fulltext: 1350 ms -> 730 ms (-46%)
Initialization of the divelistmodel: 689 ms -> 113 ms (-83%)
Let's remove the fine-grained notification. There *is* a visual
indication of work-in-progress anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The compiler complained about this and it seems the
function does not need it.
Additional-test-suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
The last setter was removed in the previous commit. Let's remove this
complexity.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Dirk Hohndel
Salvador Cuñat
willemferguson
Robert C. Helling
Berthold Stoeger
Linus Torvalds