| Age | Commit message (Collapse) | Author |
|---|
|
print mode was used to limit the functionality of the profile,
when used in ssrf-mobile.
The effect is that DC events are displayed, but not selectable
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
On deletion of a single or multiple pictures, the whole DivePictureModel
was repopulated, which was clearly visible in the UI, owing to the
reconstructing of all images in the profile plot.
To avoid this vexing behavior, implement proper deletion routines in
DivePictureModel and ProfileWidget2. Since this needs sensible erase()
semantics the QList<PictureEntry> member of DivePictureModel was
replaced by a QVector. A QVector should be the default anyway, unless
there are very specific reasons to use a QList (which actually is
a deque, not a classical linked list).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The function removePicture() had a flag "last", which would indicate
that the called had finished removing pictures. Only then would
the model be recalculated.
This is a strange interface and, matter of fact, the caller was buggy:
if the last picture to be removed didn't have a proper url, removePicture()
was never called with "last" being set.
Change the interface to take a list of pictures to be deleted. This
will allow us to make picture deletion smarter in follow-up commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the old code a combination of removeRows()/insertRows() was used
to signal a model reset.
Replace this by a single, modelReset signal. This saves a call to
plotPictures() and will allow us to be smarter in the future,
when removing pictures.
Reset-model and remove-items are semantically different.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Read libdivecomputer.log file and append to clipboard
Remark, subsurface_open is not available in iOS so using
QFile instead.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Both subsurface.log and libdivecomputer.log are on the clipboard.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Make location of subsurface.log and libdivecomputer.log consistent
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
QEvent::DeferredDelete is not supported in iOS
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
remove parameter name for not used parameter, to silence
unused warning.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Add Q_UNUSED for not used parameter
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Turning off all warnings (-w) was too radical.
Only turning off specific warnings.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Having a split between ios and ios/Subsurface-mobile is just confusing
and without a practical reason
Move files from ios/Subsurface-mobile to ios and update .gitignore
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
one deployment.pri is enough
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When downloading with bluetooth, changing connection did not work.
The new selection was not passed to the download thread.
Fixes #1274
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems that sometimes the AppImage tooling gets confused and doesn't
create a .zsync file. That should cause Travis to fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When building with -builddeps on a "virgin" mac, configure
of libgit2 could not find libcurl and libssh2
moved building of libcurl and libssh2 in front of libgit2
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Missed a "cd $SRC" so when building with
-build-deps the script broke
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Add Q_UNUSED to unused parameter
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Specifically, don't conflate needing libgit2 with the Mac -builddep
argument, and when determining if we need to build libgit2 on Linux,
make sure to also check for a version that we may have built in a
previous run of the build.sh script.
This commit is much easier to understand with
git show -w
as it contains quite a bit of simple indentation change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The goal is to reduce the overall wall clock time of our test builds.
This secondary Linux target uses the no-sudo container setup with a Qt
5.10.1 backport and tests the build without BT support as well as the
mobile build (but not the full desktop build and doesn't create an
AppImage as the pre-built Qt5.10.1 is missing QtWebKit).
In exchange we remove the no-bt and mobile build from the existing linux
target.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should only be built if we have BT support enabled.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are the latest, supported versions for OpenSSL. I have not tested
if Android would work with OpenSSL 1.1.
The lower versio for libzip is still required as libzip 1.2.0 doesn't
compile for Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This doesn't affect the minimum we support, but a target level of at
least 26 will be required starting in August in order to be able to
upload to the Google app store. This is equivalent to targeting Android
8.0. Google plans to bump this target API level every year.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Copy the required QML modules into the app bundle.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Changed .pro file to supress warnings
clang does not allow all of the issued warnings to be
supressed with -Wno-foo, so instead doing -w
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
The Qt libraries are compiled as iOS 10.0, we link
as iOS 8.0, this is a problem waiting to happen. First
time we use a Qt function that uses a iOS 10.0 specific
function the app will crash.
Bumping iOS minimum version from 8.0 to 10.0
Removing the 76x icon, which are not valid from 10.0 and forward
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
1) Fix the English of a comment.
2) Remove a number of int-to-double compares:
Make "steps" an integer variable (the number of steps).
Rename the old double "steps" variable to "stepsInRange". This gives
a non-integer number of steps and is necessary to calculate the
correct step size
3) Replace a "x = x/y" by a "x /= y" construct.
4) Remove an unnecessary if clause.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If animDelete() was called with prefs.animation_speed == 0, the
object would not be marked for deletion, as opposed to calling
with prefs.animation_speed != 0. This would leak the objects.
Therefore delete the objects if called with prefs.animation_speed == 0.
The caller doesn't keep a reference to the objects. Therefore,
a plain delete is fine, as opposed to a deleteLater().
While touching this function, use the function-pointer version
of connect().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Integrated get-dep-lib in android/build.sh
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Android build uses wget and not curl.
Currently android uses older versions of some libs, due to that
a new switch is added temporary.
Old version tested for curl and if not found set the different versions,
however this is not a stable method for obvious reasons
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
PictureEntry was defined as class in imagedownloader.h and
as struct in divepicturemodel.h
A class has a vptr in front, so the difference is real at least
for the clang compiler.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
interpolate, rel_mbar_to_depth, gas_mod and
gas_mnd returns int but uses
a function that returns long, causing clang to
warn about conversion loss due to implicit conversion.
Adding a cast, shows that it is correct.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
lbs_to_grams and to_feet returns int but uses
a function that returns long, causing clang to
warn about conversion loss due to implicit conversion.
Adding a cast, shows that it is correct.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
When creating the ICD-notes the membuffer was not '\0'-terminated,
leading to output of stale data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Typo in email.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
get-dep-lib has been integrated into build.sh, which
ensures different platforms use the same versions etc.
travis is a frequent user of build.sh, but on a mac it runs
without -build-deps and instead used cached versions of the
library. This setup is alo supported
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Added the posibility to fetch a single third lib.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Secured git work only happens when cloning a dir.
There is a version for hidapi, but scripts/build.sh
(which are the source for that part of depend) has a
line:
# there is no good tag, so just build master
and then continues with master, so it should be good
enough for get-dep-lib as well.
Signed-off-by: Jan Iversen <jani@apache.org>
|
jan Iversen
Berthold Stoeger
Dirk Hohndel