aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-11-30Minor text cleanupGravatar Henrik Brautaset Aronsen
Use the same case for the first letter in the dive table column headers, use '%' for both gases in the planner, and show "Start time" instead of "Starttime". Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Separate text labels for air and water temperaturesGravatar Henrik Brautaset Aronsen
The "air / water Temperatures" label didn't look to good. Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Ruler: display maximum descent and ascent speedGravatar Alexandre Belloni
While playing with the ruler, I figured that it happened only once that my minimum speed was not 0 for a segment long enough to get any display. And it was a "dive" in an hyperbaric chamber... This patch replaces the minimum speed with the maximum descent speed and the maximum speed with the maximum ascent speed. Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30QT-UI: fix some typosGravatar Alexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30compare_samples: Remove unnecessary space before unitsGravatar Alexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Avoid using manual timezone offsets.Gravatar Michael Andreen
Since some early bird thought it was a good idea to force the rest of us to get up early by changing our clocks during summer, we can not use the currentDateTime() to determine the timezone offset for all dives. Instead, we just pretend that everything is in UTC and avoid doing the offset calculations. If only that early bird knew that if clocks stayed consistent throughout the year then I could be asleep instead of fixing this in the middle of the night.. Signed-off-by: Michael Andreen <harv@ruin.nu> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Turn off dive location edit hint when cancelling dive editGravatar Dirk Hohndel
Simply clear the edited dive (regardless of whether it's set) and hide the message if visible. The previous code was a little too convoluted... Fixes #305 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Latest snapshot of translationsGravatar Dirk Hohndel
German, Finnish, Norwegian, Swedish and Dutch are already mostly done! Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Latest source strings for translationsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Removed another unused textGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Editing air or water temperature should modify dive computer, not diveGravatar Dirk Hohndel
The dive fields are summary fields, the actual data needs to be in the divecomputer specific fields. Fixes #307
2013-11-29Make sure Subsurface will find Marble theme when installed on LinuxGravatar Dirk Hohndel
We need the marble data to go into a subdirectory of /usr/share/subsurface and we need to search for both data and marbledata when trying to find the theme. Fixes #310 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Don't call deleteLater on ui elementsGravatar Dirk Hohndel
I'll admit that I don't fully understand this part of Qt. But commenting out the deleteLater (like we already do for another one) fixes the crash - and shouldn't do more than add a potential small memory leak. Fixes #309 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Make sure Subsurface webservice user id is always uppercaseGravatar Dirk Hohndel
Otherwise the download will fail. Fixes #308 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Add comment for "below floor" eventGravatar Dirk Hohndel
This one is a tough one for translators. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Remove more unused windowTitle propertiesGravatar Dirk Hohndel
These just create pointless source strings for translations. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Latest translation source fileGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Units should be lower caseGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Don't use lowercase 'o' for O2Gravatar Dirk Hohndel
That just looks odd Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Fix incorrect string for PPO2Gravatar Dirk Hohndel
It's easy to miss 02 vs O2 (I guess that's depending on your screen font). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Remove pointless window titleGravatar Dirk Hohndel
Otherwise it shows up in the strings to be translated Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Pull in translations so farGravatar Dirk Hohndel
The commit shows me as author - but of course the actual work was done by all the translators. This is one of the things where the effort to give correct credit just doesn't appear to be worth it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Rewrite is_gas_used to use get_cylinder_indexGravatar Anton Lundin
get_cylinder_index implements a algorithm to map gaschange events to gas idx. This is a bit clumsy to use it to map if a gas idx have bin used, but its consistent with other parts. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Redesign CSV import dialog.Gravatar Sergey Starosek
This fixes groupbox alignment and dialog resize issues. Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Remove duplicate verb in 'SAC' labelGravatar Sergey Starosek
'Show' verb is already shown in the groupbox title and no other labels have it. Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Fix dialog titlesGravatar Sergey Starosek
Use proper names instead of "Dialog" Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Fix translation filter for subsurface4 branchGravatar Sergey Starosek
This fixes translations pulling from Transifex. Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28subsurface-configure.pri: exclude -Wno-maybe-uninitialized on win32Gravatar Lubomir I. Ivanov
On native Windows the suggested compiler for Qt4.8 is mingw-gcc-4.4.0, which does not has the -Wno-maybe-uninitialized flag (yet). Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28subsurface.nsi.in: set icons for the executable shortcutsGravatar Lubomir I. Ivanov
The executable shortcuts were lacking icons. This should do the trick, by using the packaged subsurface.ico. Perhaps it would be better if we hardcode the icon into the executable as a resource. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28Fixes ToolTip Item showing out of boundaries tooltipsGravatar Tomaz Canabrava
This patch fixes ToolTip Item showing out of boundaries Tooltips when in resizing animation. Fixes #294 Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28Make it possible to hide some columns on the Cylinders Equipment pane.Gravatar Tomaz Canabrava
This patch makes it possible to hide some columns on the Cylinders Equipment pane. The 'remove' and 'type' are impossible to hide, since they are the most important ones for a non-tech diver. Fixes #281 Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28More gradient on the partial pressure graph.Gravatar Tomaz Canabrava
This patch adds a bit more of gradient on the lines for the partal pressure graph grid, it also moves a tiny bit to the side the even numbers so it's easyer to read when they are too near each other. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28Quiet down valgrind warningsGravatar Linus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28Fix editing of negative temperaturesGravatar Linus Torvalds
We tried to clean up the temperature string (to remove degree characters and unit names etc) a bit too aggressively, and removed the sign character too.. Fixes #306 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-28Next step towards translationsGravatar Dirk Hohndel
This updates all the ts files and the tx configuration. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Add call for contributions to ReleaseNotesv3.9.1Gravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Update README and ReleaseNotes.txt for the second BetaGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Include qt.conf in the Windows installerGravatar Thiago Macieira
Otherwise, Qt won't find its plugins. No plugins -> no JPEG decoding -> very ugly maps (an understatement) Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Fix plugin deployment on WindowsGravatar Thiago Macieira
And increase our list of plugins to be deployed to include the GIF and SVG image plugins, the SVG icon engine and the CJK text codecs. The install rules now iterate over the plugin list and deploy the plugins in the right path in the staging area. The plugins must also be scanned for dependencies (Fedora's qjpeg4.dll depends on libjpeg-62.dll, which neds to be copied to the staging area). Finally, fix qt.conf needed to be fixed. Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Use wildcards in the NSIS installer rules for Qt DLLsGravatar Thiago Macieira
That way, the NSIS rules also work for creating an installer for debug builds. Which you'd do by running: make -f Makefile.Debug installer Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Search for different versions of libzip DLLGravatar Thiago Macieira
My system has libzip-1.dll, but Dirk's is probably newer and has libzip-2.dll Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Don't try to deploy libintl DLL on WindowsGravatar Thiago Macieira
We don't use it for translations anymore. Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Tell NSIS to search for the DLLs in packaging/windowsGravatar Thiago Macieira
The "make install" step will copy all we depend on DLLs there. Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Fix "make install" on Windows with srcdir != builddirGravatar Thiago Macieira
Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Updated instructions for cross building Windows binaries under LinuxGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Make a note about the plugin location issue on MacGravatar Dirk Hohndel
In order to be able to create deployable DMGs this is necessary Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Only return gas volumes for gases usedGravatar Anton Lundin
We check in get_gaslist is_gas_used, so if were going to be consistent about what we return from get_gaslist and in get_gas_used, only return gas volumes that we actually consumed during the dive. The problem now this fixes can be seen in dives/test10.xml Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Show/save weights up to and including last validGravatar Anton Lundin
Previous show and save code would have aborted at the first invalid weight system. This makes sure we save and show all weight systems up until and including the last valid. If we had: integrated: 1kg belt: 2kg ankle: 3kg And changed belt to 0 kg, we would have only saved integrated 1kg, and nothing about the belt or the ankle weights. This will save all of them, and show all of them. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Show cylinders up to and including the last validGravatar Anton Lundin
Previous code aborted at the first invalid cylinder. This instead finds the last valid and prints all the ones up until that one. Fixes #295 Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-27Update the Mac instructions to include an install_name_tool stepGravatar Thiago Macieira
This changes the Mach-O library ID to match the install path. The library ID is copied by the linker when Subsurface is linked against Marble and can be seen with otool -L. That's also what macdeployqt uses to find the dependencies: if the file matching the name in otool -L exists, macdeployqt will deploy the library and update the search paths. Conclusion: after this patch, the "make mac-deploy" command will also deploy Marble correctly. Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2025-01-01 16:14:29 +0000