| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The last minute libdivecomputer update brought in a new support dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
libdivecomputer is a submodule. Just hardcode the path to descriptor.c.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We cannot tell them apart by Bluetooth name, so pick one of the names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- Add support for the Aqualung i550C
- Update Ratio iX3M GPS naming and note that they support rfcomm
- misc cleanups
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While testing the cylinder type saving fix, I noticed that the RBT
saving was broken. Instead of saving RBT whenever it changed, we'd save
it when it was non-zero. Which doesn't match the git save format, and
also doesn't match what we do when loading an xml file (where we default
to the previous RBT value, and a sample RBT will modify it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Steve Williams reported a crash when saving a previously loaded dive as
xml, and gave a gdb backtrace.
It turns out that if we can't parse the cylinder use type (OC, diluent,
oxygen, unused) we initialize the cylinder use to an invalid type, and
then when we save it, we mess up.
Fix it up by doing proper limit checking before accessing the
"cylinderuse_text[]" array when saving.
Reported-by: Steve <stevewilliams@internode.on.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The mobile changes are far and few, but the next version will be the
first to support arm64, so a new minor number seems appropriate.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Update supported dive computers, README and ReleaseNotes
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And fix the date to say July.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Changed the Qt Layout for FilterWidget2 to "Lay Out on a Grid" to
allow the scrollarea to adjust when the height of FilterWidget2
changes. Fixes issues #2174.
Signed-off-by: Doug Junkins <junkins@foghead.com>
|
|
The old code took air and water temperatures primarily from
dive/divetemperature or secondarily if the previous one didn't have
either one of them from divecomputer/temperature. The new code attempts
to take first air temperature from dive/divetemperature or
diveomputer/temperature and then on a separate run the water
temperature from these both. Thus we should be fine if one temperature
is in dive/divetemperature and the other in divecomputer/temperature.
Fixes #2169
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
Replace four images in section 5.2.5
Update text to reflect the undo mechanism. This mostly involved removing
obsolete text.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
And some trailing space removal.
The text on editing dives hopefully is more accurate and easier to understand.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The plotDive() function had a flag to plot pictures asynchronously.
This was used on export. Rename this field to "instant" and disable
animations when set. This should make sure that the axes are properly
exported.
Fixes #2170
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When exporting dive pictures we don't want animations. Therefore,
store the animation speed in the profile object to avoid nasty
hacks with the preferences.
This actually removes such a hack. Pictures and tooltips for now
still use the values stored in the preferences, because their
animations happen only on user-interactions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
For now always use the preferences value, so that this is a
no-op. This is a preparation for storing the speed in the
profile widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The goal here is to slowly make animation speed a variable of the
profile widget, not of the global preferences. Currently the code
does some trickeries with setting / unsetting the global animation
speed.
Start by not taking a bool "instant" but a speed in
DiveEventItem::recalculatePos().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If no dive is set, all fields except the note field were cleared.
Also clear notes.
Fixes #2172
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the error messages shown when failing to start ffmpeg, instruct
the user to set the correct executable in the preferences.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the preferences widget warn the user when they enter a non-executable
path to ffmpeg. Thus they don't have to start thumbnailing just to
find out that the path is wrong.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently, the git parser happily trashes memory if a git repository
contains too many weightsystems or cylinders. This should only happen
in testing, but nevertheless try to handle it gracefully and ignore
excess cylinders / weightsystems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When switching to a BT dive computer, the device selection dialog is opened,
when switching away from BT, the device address is set.
Fixes #2139
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Small updates and corrections to existing text
Replaced four images to reflect the current UI
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
All callers of create_plot_info_new() called calculate_max_limits_new()
a line before. Thus, simply call the latter in the former.
This allows us to automatically free the plot data in create_plot_info_new().
The old code overwrote the corresponding field with NULL.
As a side-effect, this removes a bogus static variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There was a global variable last_pi_entry_new, which stored the
recently allocated plot data. This was freed when new plot data
was generated.
A very scary proposition: You can never have two plot datas at
the same time! But exactly that happens when you export for
example subtitles.
The only reason why this didn't lead to very crazy behavior
is that at least on my Linux machine, the calloc() call would
just return the previously freed memory.
Fix this mess by removing the global variable and freeing the
data in the callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
A number of declarations were not used anywhere. Remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Remove all the bogus references to older source versions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And update plurals for the en_US version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Filter widget really needed to be scrollable as it is very tall.
Fixes #2152
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Update libdivecomputer to most recent version
|
|
Add some Garmin Descent logging for common error cases, and update with
Jef's upstream (fixing tank pressure information for several dive
computers and adding support for the new Mares Genius).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Apparently this field was never used...?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Clearing dive site did not work for two reasons:
1) We didn't get a signal when editing was finished.
2) When clearing the dive site, the "add new dive site" site was set.
Thus, connect to the editingFinished signal and in
DiveLocationLineEdit::currDiveSite() return a null pointer if
the string is empty.
This means that it is not possible to have a dive site with an
empty string, but that shouldn't be a problem, right?
Fixes #2148
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In ProfileWidget2::splitDive() updateDiveInfo was emitted, but the
UndoCommand does this by itself.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In 2e230da3610dd1fc61badaf328a084512895fb90 the dive-selection signals
were unified. Sadly, this was done in a suboptimal way resulting in
numerous calls to updateDiveInfo(), which refreshes the main-tab.
Firstly, the MainWindow connected to selection changes from both,
the undo-command and the divelist. Secondly, every selected dive
in the divelist caused a single signal.
Thus, connect only to the divelist (this is necessary for user-initiated
selection changes) and only send a single signal in the divelist
per selection-reset.
This is still less than perfect as updateDiveInfo() is called even
if the current dive doesn't change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Bailing out does not happen instantly. Rather wait for
the minimum stop switch duration before ascending.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
On merging, don't use the number of the first dive if it is 0.
Use the first non-zero number.
Fixes #2126
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In "core/save-html.h", the "core/dive.h" header was included in the
extern "C" block. This is invalid, because "core/dive.h" included
from C++ code contains Qt macros that expand to C++ templates. These
in turn must not have extern "C" linkage, since a plain C-linker
cannot handle such things.
The only reason this worked is that in all cases "core/save-html.h"
was included after "core/dive.h". The include of the latter in the
former had therefore not effect.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When checking for trip-overlap on import, only really overlapping trips
have been considered, i.e. when dives had overlapping times.
Instead use the TRIP_THRESHOLD so that on download dives are added to
the same trip if in a two-days time frame.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Text has been added for the undo facility and for the specification
of atmospheric pressure.
Two images added.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we don't need to iteratively grow the QVector.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now when we change dive site location or name through a redo, the dive
list is updated as expected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now when we change dive site location or name through a redo, the flags and
associated name are always reflected correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Same pattern as the other functions in this group.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were shifting in the wrong direction. Which caused the field to be marked as
'edited' again, which meant we shifted the wrong way and twice the distance.
This seems to fix the problem for both date and time editing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Dirk Hohndel
Linus Torvalds
Doug Junkins
Miika Turkia
willemferguson
Berthold Stoeger
Robert C. Helling