| Age | Commit message (Collapse) | Author |
|---|
|
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
No need to link against the osmgpsmaps or gconf2 anymore.
Also removed the Gtk related junk from linux.c.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is more consistent with Linux and is what's expected with the recent
change to how xslt files are found.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems much better than the different hard coded and semi-hard coded
paths we had before.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add a helper function to unify the calculation of the
weight display string, instead of having the same calculation
in two places in the code.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
This patch fixes some unsane values that was being retrieved
by the ui-files on first time opening. it creates a basic layout
of the application using the current desktop size.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Some columns are a nice addition, but not a must have,
and thus are hidden-by-default, uncluttering the user interface.
This was discussed with a few designers before writting the code,
and also discussed with dirk on irc.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
This was caused by the %.o: %.cpp rule depending on "uicables". Since
it's a phony target, the file never exists, so make will always try to
rebuild it. Regardless of whether anything got run because of that,
the target will then be "newer" than the .o file that was being
considered. Therefore, make thought it had to recompile again.
Fix it by skipping the intermediate, phony target and telling make
that the C++ objects depend directly on the header files.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #205
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
"Weight" was misspelled "weigth" in several places in the code
and comments.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Subsurface stores weight values in grams. When displaying lbs,
the dive list was not rounding the converted weights up, but
rather truncating the value at the decimal place. The equipment
list was rounding the converted weights up. This gave two
different displayed values for the same weight value.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Those preferences removed ( basically the ones about visibility of
the List View of the Table ) are now managed by the Qt Settings
system, and thus there's no need to have them there. wich gave us
a pretty good cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For a new installation, subsurface will now start on fullscreen,
this fixes the bug where subsurface would start using the interface
file ( mainwindow.ui ) configured size, and that silly monster
always changes when editing something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The first time the user loads subsurface, the default_filename
is not configured yet, but yet the software tries to load "",
sending an error message that this file doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
|
|
This appears to be missing from commit 565ae2fe89dc ("Ensure that uic is
always run before any C++ source is compiled").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's very, very hard to scan for dependencies with a plain make. So
let's give up and simply enforce that all *.ui files need to be
processed before a *.cpp gets compiled.
This introduces the make target "uicables" (similar to the "mocables"
target that qmake produces) that will compile all .ui files. This
target is now a dependency of all .cpp builds.
In addition, tell make where to find .ui files and their corresponding
ui_*.h files.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we #include "qt-ui/ui_anything" from anywhere, the Makefile rules
will blow up.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When straight decoding the event, it failed to handle older
SAMPLE_EVENT_GASCHANGE(11), the ones without he-part correctly. This was
shown clearly when it printed the 21/35 in dives/test20.xml as air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't use any of the Standard Library features or classes in
Subsurface, except for three uses of std::sort, for which I added the
necessary #include.
It's always a good idea to include directly the headers you want,
without relying on indirect inclusion
On my machine, the build time dropped from 16.96s to 13.38s or a 12%
improvement.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Still don't like the order dependency - but at least this seems to work
and correctly build after make confclean.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Reported-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This means we can also remove the forward declarations.
This is the first step in removing the memory allocation for the ui
sub-classes. Without the second step, this commit is just making the
compilation time increase for no good reason :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I ran subsurface with valgrind and it found a few errors.
[Dirk Hohndel: split this out from a much bigger patch that is still under
review]
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One cannot expect #ifdef to work with enum values. So the code for
getting the salinity was basically never compiled in. And it was
putting it in the wrong location anyway (in the dive struct instead
of the divecomputer struct where it is expected).
I took the opportunity to add the reading of the atmospheric pressure
as well.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
PrintLayout::printTable():
- hide the QTableView widget border using a stylesheet
- add a guard to fix the last column extending post the page width
due to rounding
- use 1 extra pixel instead of 2 when grabbing the page region
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
get_cylinder_used_gas_string() retrieves used gas per cylinder
with optional units display.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This test dive follows the format of APD Log Viewer but contains only
the currently used data (time, depth, and temperature).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #191 on the bug tracker list
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch implements basic functionality to import CSV formatted log
profiles to Subsurface. The import includes time, depth and temperature
from AP Logviewer based on one sample log file I have received. It is
assumed that dive time is the first parameter and depth second.
Temperature is given as a parameter from C source (hard coded currently
to field 15) but we should have a GUI implemented for selecting the
wanted fields.
The two different sample logs of CSV dive log export I have received use
tabulator as field separator. I assume the possible GUI should have
option for the FS as well to be given as parameter to the XSLT.
[Dirk Hohndel: small fix to the error string malloc]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #204
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #203
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There is debate on this one, as free divers WANT the xx/sec values.
This needs to become flexible depending on whether you are in freedive
mode or not.
Fixes #202
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #201
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
Adding +30 (seconds) to the position works fine for long dives but
when zoomed in on short dives, 30 seconds are a lot.
This commit sets the offset to +10 px regardless of the scaling.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
The toolbar adds two buttons to the profile.
The user can now toggle the scaling (zoomed to dive/round up to 30 mins)
and adding /removing ruler to/from the profile using this toolbar.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
This patch adds a ruler QGraphicsItem which can be dragged
along the profile. The ruler displays minimum, maximum and
average for depth and speed (ascent/descent rate). Also, all used
gas will be displayed.
This also adds a new attribute to struct plot_data to store the
speed (not just as velocity_t).
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
before: 0:50 1:0 1:10
after: 0:50 1:00 1:10
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
printlayout.cpp(h):
This patch cleans some test code and adds the function
printProfileDives() that accepts a number of dives
per rows and columns. It can technically fit any number
of dives on a page given the page size allows it. Both
landscape and portrait layouts are supported.
It now replaces the old methods:
printTwoDives()
printSixDives()
Space is reserved for data tables that will be placed
bellow profiles on a later stage.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Gtk+ style on the Gnome shell is somewhat broken on Qt for
some reason. This hack pokes the system, checks if it's running
gnome-shell, and if the current style is gtk+ ( I couldn't just
check for gtk+ since it worked on XFCE and other Gtk based enviro
ments. so a double check is needed. ) then I changed the Pallete
of the affected widgets by hand.
not a pretty hack but worked.
[Dirk Hohndel: redid the patch to be simpler and more consistent]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fix the positioning of the `add` button when on Gtk style,
in my XFCE install (and thus, may differ a bit from the
Gnome3 one ) the Plus button to add cylinders and weigths
got really strange placements, this seems to fix this,
I also tested on Oxygen and nothing broke there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
Dirk Hohndel
Benjamin
Tomaz Canabrava
Thiago Macieira
Patrick Valsecchi
Anton Lundin
Miika Turkia
Lubomir I. Ivanov
Tim Wootton
Maximilian Güntner