| Age | Commit message (Collapse) | Author |
|---|
|
This is a much safer way to do this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We use that in the mobile app to scale the whole app, as all sizes there
are relative to the default font.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems the documentation is incorrect - unless you explicitly set the
ApplicationWindow font to the the Application Font (just writing this
down sounds so silly...), it doesn't actually work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Disable the button for the currently selected DC.
This gives an extra visual hint of which DC is currently selected.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
To prevent stale data in the download DC path we need to clear the entire
qPrefDiveComputer.vendor() object when the user purges the used DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
Disable the "Forget DCs" button when there is no DCs saved.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
Since we now store the last used DCs in out preferences we can use the information
to pre-populate the DC selector.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
To prevent stale data being visible always set the combobox indexes to -1
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
There is no point in further restricting the width of the Flow object.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
Add support for the Aqualung i100.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to just blindly pick "first" and "last" characteristic from the
preferred service, and that was stupid but happened to work for the dive
computers we supported. Note that for some of them, "first" and "last"
was actually the *same* characteristic, since it could be a single one
that supported both.
However, this first/last hack definitely doesn't work for the Mares
BlueLink BLE dongle, and it's really all pretty wrong anyway.
So re-organize the code to actually look at the properties of the
characteristics. I don't have a BlueLink to test with, but my EON Core
and Shearwater Perdix AI are still happy with this, and the code
conceptually makes a lot more sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This still doesn't do the right thing for BT/BLE connections on a Mac, but it
should work on Linux and possibly Mac.
We definitely need to figure out how to get the Mac to successfully connect back
to a BT/BLE device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now link against the user space FTDI driver.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And remove some includes and defines that are not used any more after
removal of the GPS webservice code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Fix multiple run-time errors in connect call introduced in 504e9125126.
1) Set the proper signature of the signal. 2) make the used slot
a real slot (so move it to the proper section in the header) and
3) set the proper signature for the slot.
Highly unlikely that normal users notice the runtime errors and
possibly unwantend behavior, as this all deals with the subtile GPS
service update threshold.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to just pick the first non-standard service we found (with a
special case for the Heinrichs Weikamp dive computers that have an
actual registered standard service).
We then waited for that service to finish discovery, and started using
it.
This changes the logic to wait for _all_ services to finish discovery,
and then after that we pick the one we like best. Right now the rule
for picking a preferred service is the same one we had before, but the
difference is that we now have the full discovery data, so we *could* do
something better.
Plus this makes our debug messages a lot more legible, when we don't
have the mix of overlapping service discovery with the actual IO we do
to the preferred service.
NOTE! This doesn't much matter for most of the dive computers that we
currently support BLE for. They don't tend to have a lot of odd
services.
But at least both the Mares BlueLink and the Garmin Descent both have
multiple services and it's not obvious which one to use, and this will
make it not only easier to debug those, it will make it easier to pick
the right preferred service descriptor to use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is not only much clearer (and smaller code), but it also lowers the
latency for the waiting, since we don't always wait for the full 100ms.
Get rid of the now unused "waitfor()" function that just unconditionally
waited for 100ms.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We only store the address part of the connection name, so don't try to find an
exact match, try to find the sub-string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And at least admit that the reset settings button isn't hooked up at all.
OOOOPS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This isn't hooked up, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The hard grid may look nicer on bigger screens, on smaller screens it's
a problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It would be great to have a corresponding screen shot.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It would be great to have a corresponding screen shot.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This uses the same backend as the desktop version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On macOS the first of the four DC buttons was highlighted for some reason.
Explicitly setting autoDefault to no solved that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can use the same functionality from the mobile UI as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The straight forward code to update the currentIndex of the combobox doesn't
appear to work on macOS (but works fine on Linux). Calling the event loop and
then calling update afterwards seems very unintuitive, but it appears to fix
the issue in my testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The algorithm tries to keep the order of the buttons the same. So if a dive
computer was used that's already remembered, don't reorder the buttons. But if
a new dive computer is used, add it as the first one and move the others back,
potentially dropping the oldest one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply create the buttons that can be used as shortcuts to previously used dive
computers. This isn't hooked up at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This does feel clumsy and complicated. This is a lot of special case
handling and a lot of boilerplate for something that really should be
quite simple.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to explicitly refresh the divelist when switching between
metric and imperial unit systems. Or the changes will not be visible until
we restart the app or scroll outside of what's in the current cache.
This will update both the divelist view and the dive profiles to show the new units.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
In visit_on_node() in core/parse-xml.c the name is extracted into
a static buffer. There seems to be no need for this being static,
as the name is only passed to the entry() function which (hopefully)
does not store a reference to the name anywhere.
If it does, this would need a *big* *fat* comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The existing code creates a deterministic ID (not exactly "unique") in order to
help us avoid merge conflicts in git-storage mode. But as a side effect, if we
re-download the same dive twice from a dive computer that supports GPS (right
now only the Garmin Descent Mk1) we are guaranteed to create the same dive site
uuid when we do this. So when we download a dive - whether we will actually
*use* that dive later or not - we will be filling in the dive site information
with the data we got from the dive computer.
... and in the process we will be overwriting any data that was filled in
manually. The name of the dive site, but also possibly even the GPS of the dive
site (maybe the user decided to edit that using the map, because while the
automatically downloaded GPS data was "correct", maybe the user wanted to
change it to be the actual under-water location using the satellite data,
rather than the place where you started the dive or where you surfaced).
In order to avoid this collision, this patch just makes the libdivecomputer
download not use the dive time, but "time of download" for the dive site time,
and thus effectively generate a new uuid for every download.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Build systems that run from tar balls and not git fail to create valid
.appdata.xml This solves the problem for tar balls that we create for
OBS via our own make-package script. It doesn't solve the problem for
Arch or Gentoo who I believe take our tar files created via git archive.
One way to fix this would be to change the process by which I create
those tar files, I guess.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On import of dive media, the timestamp is read from the
metadata to check if the image belongs to the selected dives.
The pictures are then listed in a dialog.
Currently, the metadata is read twice if images are outside
of a dive: once in picture_check_valid() and if it turns
out that the picture is not valid again in picture_get_time()
to display the proper timestamp.
Even though metadata-extraction is reasonably fast, this is
a bit of an embarrassment.
Instead, read the timestamps only once in the constructor of
the dialog and from then on only used these timestamps. Keep
the timestamps in a QVector. Rename the picture_check_valid()
function to picture_check_valid_time() and pass a timestamp
instead of a filename.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The merge_one_sample() function adds a sample to the destination
dive if dives are merged. For long periods between samples at surface
depths, it adds a surface interval.
To decrease the number of global objects, make the sample structure
non-static. Of course, initialization of an on-stack structure is
slower. Therefore move it into the corresponding if. Thus, the
structure will be initialized only once per surface-interval.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Unit_system is read from git storage but units are set from locale when the
app starts. To prevent a miss-match between unit and unit_system we have to
always update the preferences variable when set_unit_system is called so that
the user doesn't end up with imperial units when the preferences say metric.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The unit types are set from system locale when the app starts.
We need to explicitly set the units to match the unit system that is saved in
the git repo. Or we end up with situations where the preferences and git say
"metric" but the units are "imperial".
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When starting the app in "No cloud mode" we need to make sure that the units
and unit_system match.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add the option for the user to set the desired unit system for
Subsurface-mobile regardless of system locale
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Trivial rename of a UI string. The string "Subsurface GPS data webservice"
reminds me too much of the legacy webservice.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Jocke
Linus Torvalds
Jan Mulder
Berthold Stoeger
Salvador Cuñat