aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-12-02Pull more translations from TransifexGravatar Dirk Hohndel
As usual, I am not the author, just the person pulling from Transifex. Authorship is tracked there (rather badly). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-02Fix translation of weightsystem namesGravatar Dirk Hohndel
This is very much the same as in commit dc03b7e7d689 ("We need the correct context to translate event names"). I didn't pay enough attention when reading the bug report and missed that the weight system names were also not correctly translated. Fixes #312 (I hope this time for real) Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-02A further update to the user manualGravatar Willem Ferguson
I have added a section about importing dives from other electronic sources. There are some potential problems, because I know that the intercation with divelogs.de is not yet fully functional Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-01Reflect air and water temperature changes in dive infoGravatar Dirk Hohndel
When editing air or water temperature, you are actually editing the information in the active divecomputer structure. But the Dive Info shows the summary data created from the temperature data in all dive computers. For most people who will only ever have one divecomputer per dive this may seem like an artificial distinction, but it's very important if you track more than one computer. So in order to have an edit reflected in what's shown, we must redo the "summary creation" for data from the different divecomputers into the summary fields of the dive. Fixes #313 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-01We need the correct context to translate event namesGravatar Dirk Hohndel
Qt assumes that all strings are in the context of the class in which you use them. So when we want to display the translated event names from within the ProfileGraphicsView we need to make it explicit that these are strings that come from the C part of the code. Doing that showed another bug in the code where we foolishly compared the translated text to a fixed string. Not smart. Fixes #312 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-01Update to user manual, adding several sections and some graphicsGravatar Willem Ferguson
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Latest translation updatesGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30More strings for translationGravatar Sergey Starosek
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Add application icon to dialogsGravatar Sergey Starosek
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30More translations updatesGravatar Dirk Hohndel
Again, the author credit to me is wrong. I only did some of the German translations. Everything else has authorship tracked on Transifex. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Fix all leak-at-exit from singletons in SubsurfaceGravatar Thiago Macieira
Subsurface creates a lot of singleton instances on demand, but nothing ever deleted them. Since they are singletons, these memory allocations are technically not leaks. However, they clutter the output in valgrind and other memory analysers, hiding the real issues. The solution is to delete these items at exit. For the models and for gettextFromC, the solution is to use a QScopedPointer, which will delete its payload when it gets destroyed. For the dialogs and other widgets, we can't do that: they need to be deleted before QApplication exits, so we just set the parent in all of them to the main window. Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Delete the graphics items for the ticks and labels in the rulerGravatar Thiago Macieira
Ruler::updateTicks() was creating them, but nothing deleted them. Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Fix memory leak of the MinMaxAvgWidgetPrivateGravatar Thiago Macieira
Found by Dr. Memory, run by Lubomir: Error #63: LEAK 24 direct bytes 0x344f42e8-0x344f4300 + 0 indirect bytes # 0 replace_operator_new [d:\drmemory_package\common\alloc_replace.c:2421] # 1 MinMaxAvgWidget::MinMaxAvgWidget() [qt-ui/simplewidgets.cpp:64] Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Fix uninitialised variable readGravatar Thiago Macieira
Found by Dr. Memory, run by Lubomir: Error #48: UNINITIALIZED READ: reading register al # 0 StarWidget::mouseReleaseEvent() [qt-ui/starwidget.cpp:29] Signed-off-by: Thiago Macieira <thiago@macieira.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Print: fix wrong Max. CNS / SAC columnsGravatar Lubomir I. Ivanov
Swap the places of the CNS and SAC values in the profile tables. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: add an icon for the print dialogGravatar Lubomir I. Ivanov
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: adjustments to PrintDialogGravatar Lubomir I. Ivanov
- Hide the sizeing sliders from PrintOptions. we don't really support any of those in PrintLayout and these are not that useful and easy to implement, until some sort of layouting/templating system is in place. - Move the 'Print' button on top as a workaround, since if it's bellow the print options it stays bellow an empty area where the now hidden sizing sliders are. - Resize the dialog to a smaller size Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Merge branch 'print' of github.com:neolit123/subsurfaceGravatar Dirk Hohndel
2013-11-30Weight and length units need translationGravatar Sergey Starosek
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30More strings to be translatedGravatar Sergey Starosek
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Fix dialog margins and spacingGravatar Sergey Starosek
Make it consistent with other application dialogs. Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Fix string in About dialog for translationGravatar Miika Turkia
The translatable string in about dialog is truncated at the VERSION_STRING. Thus it has to be given as argument to the tr function. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Fix a crash when no trip existsGravatar Miika Turkia
When there are no trips at all, we have to skip the Yearly statistics alltogether, including the header line (that should display all the dives added together). Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Print: yet another font adjustment for the profile tableGravatar Lubomir I. Ivanov
We now only use a slightly large font for the "Dive #" entry. All other font sizes remain at 9px. Another change is that we now attempt to use 11px for individual row height. This makes the table at least 12px bigger (n_rows * increment), but does not cut letters like 'g', which go slightly bellow the font baseline. Perhaps this can be improved later by adjusting the font and row sizes again. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Remove use of uninitialized variable nrGravatar Anton Lundin
nr was used but never initialized. Also, the code removed used select_dive had likely just been forgotten to be removed when the correct code using selectDive() was added a little later in the function. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Print: fix missing vertical line at the last columnGravatar Lubomir I. Ivanov
There was a line missing in the right-most column wrapping the table for the profile print. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Remove unused variableGravatar Anton Lundin
Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Reorder initializers to be more c++-strictGravatar Anton Lundin
c++ have some idea about in what order things should be initialized. This makes us comply with that order. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Minor text cleanupGravatar Henrik Brautaset Aronsen
Use the same case for the first letter in the dive table column headers, use '%' for both gases in the planner, and show "Start time" instead of "Starttime". Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Separate text labels for air and water temperaturesGravatar Henrik Brautaset Aronsen
The "air / water Temperatures" label didn't look to good. Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Ruler: display maximum descent and ascent speedGravatar Alexandre Belloni
While playing with the ruler, I figured that it happened only once that my minimum speed was not 0 for a segment long enough to get any display. And it was a "dive" in an hyperbaric chamber... This patch replaces the minimum speed with the maximum descent speed and the maximum speed with the maximum ascent speed. Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30QT-UI: fix some typosGravatar Alexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30compare_samples: Remove unnecessary space before unitsGravatar Alexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-30Print: update the values for DM, buddy, suit, etcGravatar Lubomir I. Ivanov
We update the values for divemaster, buddy and etc... Rating and visibility are currently displayed as "x / 5" values. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: update printing for gas, CNS, SAC and weightsGravatar Lubomir I. Ivanov
Following the new layout for the profile print, we separate the used gas like so: AL80 / EAN33 / ... Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: add more table headings for Divemaster, Buddy, etc..Gravatar Lubomir I. Ivanov
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: set correct row/column location for profile notesGravatar Lubomir I. Ivanov
NOTE: also comment out the old cylinder/weight printing code... Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: update the profile print table Gas, SAC, CNS titlesGravatar Lubomir I. Ivanov
This only updates the titles to correct column offsets. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: give more space for the depth and duration columnGravatar Lubomir I. Ivanov
There is not enough space for the last column in "6 print" even for the english text. This gives more space extending the row, but for some languages it will be an issue, thus strings have to be eventually shortened by the translators. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: remove the helper function to truncate stringsGravatar Lubomir I. Ivanov
ProfilePrintPmode::truncateString() was not really needed, because long text *should* be trunctated by the table itself. Also we now are going to have multiple lines for notes, so the auto-trim should work. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: adjustments to font sizes and alignmentGravatar Lubomir I. Ivanov
The new profile table requires different alignment and different font sizes for specific cells. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: update drawing of the profile table gridGravatar Lubomir I. Ivanov
The new table layout requires that we draw the vertical and horizontal lines differently. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-30Print: setup for a new profile table layoutGravatar Lubomir I. Ivanov
- Adjust the new rows and column count - Set new row and column spans Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2013-11-29Avoid using manual timezone offsets.Gravatar Michael Andreen
Since some early bird thought it was a good idea to force the rest of us to get up early by changing our clocks during summer, we can not use the currentDateTime() to determine the timezone offset for all dives. Instead, we just pretend that everything is in UTC and avoid doing the offset calculations. If only that early bird knew that if clocks stayed consistent throughout the year then I could be asleep instead of fixing this in the middle of the night.. Signed-off-by: Michael Andreen <harv@ruin.nu> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Turn off dive location edit hint when cancelling dive editGravatar Dirk Hohndel
Simply clear the edited dive (regardless of whether it's set) and hide the message if visible. The previous code was a little too convoluted... Fixes #305 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Latest snapshot of translationsGravatar Dirk Hohndel
German, Finnish, Norwegian, Swedish and Dutch are already mostly done! Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Latest source strings for translationsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Removed another unused textGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-29Editing air or water temperature should modify dive computer, not diveGravatar Dirk Hohndel
The dive fields are summary fields, the actual data needs to be in the divecomputer specific fields. Fixes #307
2013-11-29Make sure Subsurface will find Marble theme when installed on LinuxGravatar Dirk Hohndel
We need the marble data to go into a subdirectory of /usr/share/subsurface and we need to search for both data and marbledata when trying to find the theme. Fixes #310 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-27 03:05:27 +0000