| Age | Commit message (Collapse) | Author |
|---|
|
Completely adapt to the api changes of OverlaySheet in Kirigami2
in order to achieve the same look and behavior for the dive
edits that had with kirigami1
Port most components to QtQuickContrls2, except comboboxes
in the dive edit sheet that will need a new control type
Signed-off-by: Marco Martin <notmart@gmail.com>
|
|
This is a rather arbitrary value, intended to create actually valid
pressure values for Uwatec Memomouse users - since we treat 0bar as
invalid pressure value, this simply creates an arbitrary '30bar + delta'
to '30bar' consumption graph (since all the Memomouse devices give us is
the pressure delta that was used during the dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of delivering the actual start and end pressure, memomouse
gives you a start pressure that matches the delta between actual
start and end pressure, and an end pressure of zero. Who the heck
knows why it does that, but the information is better than nothing,
so we should accept it.
Fixes #286
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Stefan suggested "Maybe it would be nicer to move the 3 fields for the
maximum pressure for N2, He, O2 for MOD to the right in the UI window
exactly below the maximum field for the O2 (where we now have
minimum + maximum)."
And I agree, so this is the change.
At the same time, reset the tab-order to a logical one.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... as per popular request. Plus adding const keyword to constant
strings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Reported-by: Stefan Fuchs
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Upon replanning a dive, we want to delete the old
dive plan in the notes and replace it with the actual.
This fixes a problem when we failed to detect the old plan due
to the deco model name appearing in the disclaimer that was used
as a marker for the notes.
This patch also adds translation markers for the deco model name strings..
Fixes #285
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Adapt the testpreferences procedure for the new min/max pO2 preference.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Color the p02 graph also in red for going under the minumum p02 value as
set in the Preferences.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.
ref: https://github.com/Subsurface-divelog/subsurface/issues/259
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This can occur e.g. if directory permissions prevent one from writing to
the local cloud storage directory. (Such a crash was discussed on
mailing list.) The error message on GUI is misleading, claiming that
cloud connection failed...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
---
We probably should check the return value of other git operations as
well, but going for bare minimum for now.
|
|
commit 597539ce39ab10 breaks my compile. Fixed here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Trivial typo fix, suggested in issue #274. Apnea is more common than
Apnoea, and Apnea is also used in the code already, so, more common
and more consistent. Hmm. A lot of text for a one letter fix.
Close of issue suggested #274.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Accessing Facebook stuff without a dive selected (as in an empty logbook)
just SIGSEGVs. Just be more carefull.
After this fix, it is still possible to upload an "empty dive" to FB. Ok,
a little pointless, but a nice picture of the Subsurface logo is uploaded
to FB. Consider it an easter egg :-)
Fixes: #280
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
For CCR dives we want to display the setpoint and pO2 information,
due to the limited screensize we have to remove the temperature graph or
the view will be to cluttered.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
Trivial change to silence compiler waring about QStyleOptionViewItemV4 being deprecated.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Give a hint how to enable build of debug Qt5 DLLs when building MXE.
Take care about the "d"/"xxxd.dll" suffix for DLLs.
Copy libastro.dll from marble to correct loation as well (nevertheless we don't use it)
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
The same ComboBoxDelegate is used for picking a cylinder model
and picking a gas in the planner waypoint table. In the former
case we want to allow the user to edit the string in the second
we don't.
The difference is not if we are in the planner but which use of
the class. So add a bool allowEdit to the constructor.
Fixes #272
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
|
|
Second attempt to do the thing with the red background color for cylinder
start and end pressure correctly. This now should cover all scenarios.
This rewrites and partitially reverts commit b8e044d
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Sending nicely readable formatted coordinates to Google Maps does not
result in a correctly positioned map. Google likes unreadable
decimal format.
Little hacky solution. Added a gps_decimal attribute, populate that
with the standard function for format a coordinate to string, but
reset the preferences value temporarly so that it always converts it
to decimal style.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
See commit 25dcee139e. Preferences Defaults renamed to General.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
See commit 6305361d1477. Graph is renamed to Profile.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
See also commit acb38c9e00f2. pSCR is with respect to cylinder planning very
similar to OC planning. Obviously, the SAC is much (max. 8x for counterlung
ration 1:10) lower, but multiple gasses are common (in all but recreational
pSCR diving).
Changed the wording to reflect this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
from the planner section the follwing paragraph is weird and partially incorrect:
These changes should reflect the cylinders and gas compositions defined in the table
with _Available Gases_. If two or more gases are used, automatic gas switches will be
suggested during the ascent to the surface. These changes can be deleted by
right-clicking the gas change and manually creating a gas change by right-clicking
on the appropriate waypoint.
Yes: during the ascent, gas switches are automatically planned (not suggested). These
can't be deleted by right-clicking (as there are no real waypoints associated with
the gas switches). And futher. To delete a gas change you have to manually create one?
Solution: refrase paragraph.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Add a sentence in the central section on manual profile entry that waypoints
can also be moved by keyboard (arrows).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Just said that we do not need to plan the ascent. Removed the 2nd ocurrence.
Also: trivial typo corrected
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
The manual suggests that in the Available Gases dialog of the planner, setting of
pO2 is possible. This is not the case, and changed the text accordingly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Mostly typos and some wording change due to change of UI from
working pressure to starting pressure. And some subscripts changed,
some correction, some style. Now all are in ~2~ format.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Section is called Proxy and nor Proxy Type (which is attribute
in the section).
Simple incorrect wording fixed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
The old wording suggests that your ISP has something to do with
the Subsurface cloud or companion app. This is not right, so did
a little rewrite.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
trivial 1 letter typo.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Spell (p)O2 correctly with a subscript.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This fix seems to fix the enumerate problem: the problem that on a
seemingly non-determinstic way, all the profiles get enumerated
and rendered, causing freeze of the app, or even crash due
to out of memory.
Only 3 lines of code change, but this fix did not come easy. The
enumerate problem seems some kind of race condition between QML,
Kiragami and most definitely, the Subsurface QML code itself.
The breakthrough in my debugging was the setting of
highlightRangeMode: ListView.StrictlyEnforceRange based on
the QML documentation on snapMode: enumeration.
This fix deserves proper testing in multiple environments. As
could be seen on the developpers mailing list, I was (easily)
able to reproduce the enumerate problem, but Rick was not. So
I definitely do not claim to understand why this fix solves
the issue for me.
And as a sidenote: fixes #263 for me as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Just an update of comment. The stange issue with Qt5.7.1 is
still present in Qt5.8. Extend the comment accordingly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Add automatic tests in TestPlan for minimum gas:
- Copy minimum gas result (pressure) to diveplan.
- Add cylinder size and working pressure for bottom gas to every dive in TestPlan
Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan
- Add minimum gas check for every dive
- Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank
Hint: Deco check for these new dives is commented out at the moment
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
For the "crazy" long and deep dives in "TestPlan" an overflow happened here.
Rearranged the calculation to have more margin.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
This way the dive on either side should be cached.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead have the view follow the currentItem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's unclear why this code was added in the first place - removing it
makes the highlight of the selected dive in the dive list work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
At least that's what the QML documentation recommends.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove unused signal handler.
Small whitespace cleanup.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we don't have a currentItem, don't try to access its members.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In preferences->profile:
Move "bar" from text description to entry field (5x)
Move "l/min" from text description to entry field
Add suffix "%" to GF values
Rename VPM-B conservatism
In planner preferences:
Add prefix "+" to VPM-B conservatism
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
Marco Martin
Dirk Hohndel
Jan Mulder
Robert C. Helling
Miika Turkia
Joakim Bygdell
Stefan Fuchs
Jeremie Guichard