| Age | Commit message (Collapse) | Author |
|---|
|
1) Always open the user path on Import / Export
2) Update the list after Export, as the user might
have exported to the user path
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Add the function set_bundled_templates_as_read_only()
in templatelayout.cpp/h. The function is used to
mark the bundled template files as read-only in
the user folder. It is called in mainwindow.cpp,
after the files are copied from the bundle.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The previous commit by Willem introduced
a new HTML template file which is not needed, as it was
decided to override the default `One Dive.html`.
This patch also include small cleanup in the new version
of `One Dive.html`.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
1) Place the dive profile below the synoptic info for the dive.
2) Re-arrange the synoptic info items.
3) In the synoptic info, replace air temperature info with
gas and cylinder info.
4) If any items among the the synoptic data take more than one line,
the the alignment of cells in the synoptic info table is
maintained. In the previous version this caused a ragged bottom
edge of the synoptic info table.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
|
|
Currently not mandatory in our code because we never include
prefs.h from a C file today but for the future this could avoid confusion.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Bool is the correct choice for this option.
int was used before because it was not clear to me how and if I can use
bool in this C file.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Fixes an obscure bug, which happened under very specific circumstances.
Precodition: fresh program start and neither of the partial pressure
graphs, nor the heat maps are shown. User clicks on heat map icon.
Bug: The heat map is not shown at the bottom of the graph.
The fix consists in replacing two percentageAxis->setLine() calls
by precentageAxis->animateChangeLine() calls.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the old implementation there were two static C-style strings, filename
and path, which were initialized to NULL and filled on first call of
the function (i.e. singletons).
There is no sense in having two static variables indicating whether
this function was called previously. Moreover, there is no point
in remembering filename accross function calls, because it is not
used once path is set to a non-NULL value.
Therefore, make the filename variable non-static and calculate it only on
first invocation (as indicated by a NULL path). Moreover, free() the filename
variable after its use to fix a memory leak of the old code.
The windows code is slightly different in that the temporary filename is
not dynamically allocated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This tries to remove subtle ownership issues. When copying preferences
structures, the default filename is copied. But the default preferences
struct simply takes a pointer to a global string which is free()d in main().
Now, this is not strictly a bug because the free()ing of preferences
resources is not implemented. Yet, let's try to make this consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Sneaked in 2 earlier commits solving a published issue.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Currently, it was only possible to use a hard-coded default
cylinder in the preferences. At the same time, the user is
allowed to add own cylinders to a dive (by just typing in
a new name and cylinder properties). These own cylinders
could not be selected in the preferences, requiring the
user to manually add this every dive.
Not sure the reason for all this was intentional, or just
an overlooked aspect in the implementation. It appeared
that the selection list in the UI was constructed before
any logbook was parsed, so at that moment, there are only
hard-coded cylinders.
The fix is simple. Refresh the UI of the preferences just
before it is shown. While opening the logbook, a new
list of cylinders, including the own cylinders is
constructed, so the UI is refreshed to that.
While a simple change, there is a use case that might be
considered strange. Open a logbook, choose new logbook,
and change the default cylinder preference to an own
(from the previously opened logbook). Do not add a dive
with the new (own) cylinder and save this logbook.
Reopen this new logbook, and see that the default
cylinder in the preferences is empty. This is logical,
as the list of own possible cylinders is constructed
from the (new) logbook, that has no dive with that
specific own cylinder. I consider this acceptable
behavior, as it can be also be used to copy own
cylinders to a new logbook.
Fixes: #821
Proposed-by: Davide DB <dbdavide@gmail.com>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This is too unreliable and too buggy to work be useful.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Boolean settings were declared in pref.h randomly as bools and shorts.
Since the code relied anyway on bool being well-defined and identical
on the C- and C++-sides, turn all of them into bools. They use less
space and express intent more clearly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In general, the C++-side of the preferences code consistently uses
the bool data type for boolean settings. There are five exceptions,
which use short instead:
showPo2
showPn2
showPhe
saveUserIdLocal
displayInvalidDives
This patch attempts to make the code more consistent by turning
these into bools as well.
Tests showed that writing as short and reading as bool is handled
gracefully by the Qt variant code. Therefore, an upgrade should not
cause user-visible changes to their settings.
As a bonus, two extern declarations of the set_save_userid_local()
function, which is not defined anywhere, were removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Notice this is not the current master. Do not go there
right now. Kirigami SHA f8ee631aac787b60 introduces
a failing load of our main.qml (tested with both
Kirigami 2.0 and 2.2).
This SHA is safe.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
And again, no visual changes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Tested fine without visual changes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Upgrade QtQuick to 2.6. Seeing a small artifact in the application
header, lets see what happens when upgrading more includes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
When first tested this commit, especially the dive list was looking
terrible. However, after including newer SHA's from libkirigami, and
correcting lots of spacing/margin issue, a retest of this commit shows
no strange artifact any more, and the amount of warnings in the log
output is reduced significantly. So now, it appears save to
upgrade.
Notice that main.qml still uses Kirigami 2.0. and is not updated in
this commit. With version 2.2, there is a new way of theming, that
is not (yet) compatible with our current code. Blindly upgrading to
2.2 leads to a almost black dive list, wrong button colors, and
runtime errors in the log, due to the fact the direct setting from
QML Kirigami's Theme colors is not allowed any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
While investigating Qt 5.9.2 problems, I found this unused code.
Just remove it.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Fix an indentation issue in qt-models/diveplannermodel.cpp.
An if was indented as if it were part of an outer if.
Correct indentation confirmed by Stefan Fuchs <sfuchs@gmx.de>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Fix an obvious indentation bug where one line more than intended
was indented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Make all char * pointers in pref.h const to make it clear that these
strings are not mutable. This meant adding a number of (void *) casts
in calls to free(). Apart from being the right thing to do, this commit
makes the code more consistent, as many of the strings in pref.h were
already const.
While touching core/qthelper.cpp turn three instances of (void*) into
(void *).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Change an unsigned integer to a signed integer in profilewidget2.cpp,
because commit 1f8506c changed the definition of duration_t from
unsigned to signed.
Since this value represents the number of seconds since a dive started,
there is no possible chance of overflow problems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Commit d6c013f303 introduced a cast to avoid a signed/unsigned
comparison warning for all translation units that included
core/dive.h.
Commit 1f8506ce64 then changed the definition of duration_t from
unsigned to signed, inverting the effect of d6c013f303.
Thus, revert d6c013f303 to allow compilation with -Wall without
flooding.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This prevented googlemaps from building in some circumstances.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit e643589233 ("Travis: setup up the desired release message
right away") we temproarily switched to my fork of uploadtool to take
advantage of a new feature that I had implemented there. This has
already been merged upstream, so let's switch back to upstream.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of using the default release message and then trying to fix it up
in the after_success section of one of the builds that we test, let's just
always use the message that we want, regardless which build finishes first.
This currently requires my fork of the uploadtool - the changes have been
submitted upstream and I hope they'll get merged there so we can switch
back to the upstream version of uploadtool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Don't try to follow the (recursive) symlink.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove old 4.7.2 headline.
Add pressure graphs improvement.
Add VPM-B ceiling improvement.
Suggested-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This very simple commit has a long story. See the mailing list
subject "mobile: android splash screen (and issue 513) opacity
weirdness".
There is even more. I found the following deccription on Internet:
https://falsinsoft.blogspot.nl/2017/07/qml-show-android-native-splash-screen.html
and tried to implement this with the potentially nice Qt functionality
(since 5.8) to manually get rid of the splash screen. Unfortunately,
this does not work. Notice that there are subtile differences in
the here found internet page, and the method originally implemented
in commit 04e994b575.
This fix is as mimimalistic as it can be. Just do not set black but
white for the initial background. Unfortunately, there is still
a small position change of the icon. It is known why, but solving
is left as an exercise to the reader.
Fixes: #513
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Free a bunch of C-style strings before assigning newly copied strings.
One case was particularly buggy:
prefs.locale.use_system_language = copy_string(qPrintable(value));
Note that prefs.locale.use_system_language is a bool, which of course
always evaluates to true! Probably nobody noticed because a restart
is required when changing locale.
Moreover remove a few double-semicolons.
|
|
|
|
Stefan Fuchs points out that sometimes you get cylinder duplication when
you merge dives, particularly with a planned dive. For example, if we
had different manual pressures in the two different dives, the cylinders
will be kept separate.
But that also means that we don't want to plot the pressures from those
other cylinders that came from another dive and are now associated with
another dive computer.
Change the "seen" logic for the cylinder to ignore cylinders that are
only mentioned by other dive computers than the active one.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's already used in core/gaspressures.c where it was declared
privately, and we'll have a new user in the profile code, so just
declare it in a proper header file like it should have been.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The "prev" cylinder can never be negative since commit 56c206d19fba
("For more manual gas pressure details"), so remove stale code that
checks for a case that cannot happen any more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The almost 3 year old commit e1db5f21b15b2 introduced the behavior
that you need to type at least 1 character for a tag to show any
autocompleted data. While this went unnoticed for years, there
is always a user that notices this changed behavior.
The solution is rather simple. Do allow the 0 lenght string
to act as seed for autocompletion instead of just returning, and
doing no autocomplete at all.
As the afore mentioned commit was explicitly meant to prevent over
active firing of the tag list autocompleter, this (simple) change
is carefully tested on this, and no adverse effects are visible.
Fixes: #605 (wrt the 1 character issue)
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Until now accidentally the dateLabel was disabled and the timeLabel
was enabled. Changed this the other (correct) way round.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Add a 'Documentation change' section to the PR body.
This instructs the PR submitter to edit the section
with notes for the team editing the documentation.
If a PR has such notes, a maintainer should then
apply the needs-documentation-change label, so
that the documentation team can easily filter
such PRs by label.
Suggested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This adds a android-apk-build which runs on travis-ci. This is using a
quite ugly trick, building in a docker container, basically just to get
a newer cmake. The cmake in trusty is way to old to work with android
builds.
A good side-effect is that this is a complete copy-paste for anyone who
would like to build android-binaries them self on Linux. All the
uglyness is hidden away in a docker container.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
Just use the source tree you where called from instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
Back in 6451adfec11262c3522878e700cb6794df8ee3d2, the path to the qt
binaries was changed. The current binaries are back on the old urls, so
this reverts half of 6451adfec11262c3522878e700cb6794df8ee3d2.
The other half is still true.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
This is handled by build.sh, which handles it correctly for running with
set -u.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
This way we can auto-accept all the licenses.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
Previous code ended up in a eternal loop on unknown arguments.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
This is to comply with set -e
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
Lubomir I. Ivanov
Willem Ferguson
Stefan Fuchs
Berthold Stoeger
Jan Mulder
Dirk Hohndel
Linus Torvalds
Anton Lundin