| Age | Commit message (Collapse) | Author |
|---|
|
don't create a local PassiveNotification copy,
use the global show/hidePassiveNotification from
ApplicationWindow, now that it works
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Not sure what this was even supposed to do...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #1014
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
All error cases need to reset it as well.
And it's easier to reset it right after we come back from parse_file()
instead of trying to track all the exit cases after that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. and use a linear mix of them for arbitrary gas mixes.
For the special case of air, we continue to use the air-specific
polynomial.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This goes back to just doing air compressibility, but using the
least-squares quintic polynomial equation that Lubomir generated based
on the Wikipedia table for air at 300K in the 1-500 bar range.
We might be able to do similar things for mixed gases..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The gas compressibility is such a specialized thing that I really prefer
having it separate.
This keeps Robert's Redlich-Kwong equation as-is, but let's experiment
with other models soon...
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And hide the notification either after 5 seconds or once we are done.
This requires an extension to the Kirigami components that isn't upstream,
yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This can then be used to give the user visual feedback (instead of them
just thinking the app is hung).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Oops, I forgot to take the sort model on top of the model into account.
Now everything should stay consistent - ListView order when accessed from
QML, but internal order when accessing the underlying array.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to make sure that a new fake DC is created after the duration was
changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When manually adding a dive and moving it in the dive list (by editing
it's start time) we could create a situation where the dive list
internally was correct, but the dive list model on screen showed an
incorrect dive list with the new dive in two different spots.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dive list might contain dives in the future, don't add the new dive to
then end but instead add it at the correct spot in the list
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Don't do the slow motion scrolling through the list if we previously
showed a different dive in the list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The function preprocessTemplate(), did not account well
for indexes in Grantlee variables, such as:
dive.weight# (where # is the index)
dive.cylinder#
To solve the issue the list (QList<QPair<QString, QString> >)
for variables to be replaced is populated will all possible
indexes:
0 - MAX_WEIGHTSYSTEM for weights
0 - MAX_CYLINDERS for cylinders
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This code is very similar to the undo code in the desktop UI, but
untangling that from the desktop seemed massive overkill; we don't have
lists of dives to delete and undelete here - so this is actually much
simpler and easier to maintain (I hope).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dialog gives the user 3 seconds to undo the delete and then disappears
without any user interaction.
This isn't hooked up, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As it turns out, the van der Waals equation gives results that are
numerically not really useful, so we use the Redlich Kwong equation
which is, according to Wikipedia, much more accurate, which can be confirmed
given the empirical values for air.
As opposed to the previous approach with a look-up table, this takes
into account the actual gasmix. This always assumes the gas to be at
20 degrees Centigrade.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With the recent refactoring of the DiveHelperObject class, some
more Q_PROPERTIES were added and can be used with the Grantlee engine.
We expose some of the additions to the user via the manual.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
"weights" and "cylinders" are QStringList Q_PROPERTIES, and Grantlee
should be able to render them, but it doesn't.
To be able to print the whole list of weights and cylinders we
introduce two new QString properties "weightList" and "cylinderList".
The variable replacement in the previous patch deals with the
conversation of the user side HTML, e.g.:
USER -> INTERNAL
"{{ dive.weights }} -> {{ dive.weightList }}"
"{{ dive.cylinders }} -> {{ dive.cylinderList }}"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The current Grantlee template loading scheme does not
allow a preprocessing layer. With the recent DiveObjectHelper
changes the layer is required if we don't want to add a set
of dummy methods and Q_PROPERTIES which will only inflate
the DiveObjectHelper class.
Use the already present helper readTemplate() to load the
raw HTML template and pass it to a static function which
does some variable replacement to accomudate DiveObjectHelper.
This change is done for the sake of not breaking the Grantlee
HTML variables on the user side!
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This reduces the margin to use more of the available space and also makes
the first column slightly wider so the word "Cylinder" isn't broken on a
Nexus 6p.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Normally this is triggered when the DiveDetailsView component is
completed, but since QML isn't recreating this component unless we switch
to a dive a couple of spots in the dive list away from this one, we
wouldn't get any changes in the data reflected in the profile.
But since this now redraws the same dive that potentially was drawn last,
we need to make sure we call plotDive() with force=true.
I also suspect that this could help with the strange bug that sometimes we
show a blank profile after certain edits.
See #1013
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So make it a void function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There was a reported case of an import of a dive that gave a salinity of
35g/l. This is an actual salinity (an amount of salt in the water) but
for subsurface the salinity is actually the density of the water. So for
too small values of the salinity add the density of fresh water.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We could in theory make this dependent on the gasmix, but for now let's
just assume (incorrectly) that everything we breathe acts like air.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is questionable, but perhaps useful.
When showing imperial cylinder sizes, show both the nominal value (with
no compensation for compressibility of the gas) and the "actual" amount
of gas the cylinder contains.
So an AL80 will show as a size of "80 (77)cuft", because while 80 is the
nominal size, the actual amount of gas that will fit is just 77 cuft.
[Dirk Hohndel: adjusted to take translation of the unit into account]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We had two totally different usage cases for "get_volume_string()": one
that did the obvious "show this volume as a string", and one that tried
to show a cylinder size.
The function used a magic third argument (the working pressure of the
cylinder) to distinguish between the two cases, but it still got it
wrong.
A metric cylinder doesn't necessarily have a working pressure at all,
and the size is a wet size in liters. We'd pass in zero as the working
pressure, and if the volume units were set to cubic feet, the logic in
"get_volume_string()" would happily convert the metric wet size into the
wet size in cubic feet.
But that's completely wrong. An imperial cylinder size simply isn't a
wet size. If you don't have a working pressure, you cannot convert the
cylinder size to cubic feet. End of story.
So instead of having "get_volume_string()" have magical behavior
depending on working pressure, and getting it wrong anyway, just make
get_volume_string do a pure volume conversion, and create a whole new
function for showing the size of a cylinder.
Now, if the cylinder doesn't have a working pressure, we just show the
metric size, even if the user had asked for cubic feet.
[Dirk Hohndel: added call to translation functions for the units]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This actually didn't make a difference for the common case, since our
simplified gas compressibility model had a compressibility factor of 1.0
up to 200 bar, and increased smoothly from there. As a result, the
common 2400 and 3000 psi workpressures didn't really see an effect from
this.
Not taking compressibility into account does kind of make sense for
cylinder naming, since the cylinder may be used for different gases with
very different compressibility characteristics.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This marks "surface_volume_multiplier()" static in preparation for
changing it to use an actual honest-to-goodness compressibility
estimation. Without that, it wasn't obvious that the function wasn't
used in other random places.
Also, remove the "wet_volume()" function. It was unused, but more
importantly, it was wrong. Yes, it was the inverse of "gas_volume()",
but when you calculate wet volumes from the imperial sizes, you don't
actually use the "real" gas volume, you use the idealized one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We use random numbers for file names, both temporary filename when
creating a zip for divelogs.de upload and for filename on form data for
facebook upload. This does not require for true randomness but we still
want these to not be constant on each run of Subsurface. Thus we need to
initialize the random number generator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code was wrong (and in the case of metric display for weights >= 20kg,
spectacularly wrong) in more or less all cases.
Rounding. It's good for the sole.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows the user to delete the currently shown dive. This action takes
effect right away, no confirmation, it gets right away written to the
local git cache.
One idea for an undo operation here could be to simply reset the git tree
to HEAD^ and reload. Not elegant, but would work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Once again we make this save the changes to the local cache without being
prompted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Upload seems to work as is...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of re-calculating all the interpolation data for each plot entry
(which means that we have a quadratic algorithm that walks over all the
plot-info points for each plot-info point), we can just update it
incrementally within any particular interpolation segment.
The previous cleanups made the code sane enough to understand, and makes
it trivial to see how you don't have to recalculate the full thing.
This gets rid of the O(n**2) algorithm, and it instead becomes O(n*m)
where 'n' is the number of plot entries, and 'm' is the number of gas
segments (which is usually a much smaller numer, typically "1").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With the two bigger simplications, this just re-organizes the code to do
the "interpolate.pressure_time" update that is shared among all the
"after segment start" cases in just one place.
That leaves the get_pr_interpolate_data() much simpler, and makes it
much clearer what it actually does.
In particular, it becomes very obvious that "interpolate.pressure_time"
is constant for one particular segment (it's the total pressure time),
and that "interpolate.acc_pressure_time" is the one that gets updated
for every entry.
The next step is to only call this for the first entry, and then update
just the "acc_pressure_time" in the caller.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Getting rid of the pointless always-zero pressure now makes it obvious
how some of the remaining code can just be removed too: there is no
point in re-initializing the pressure_time entries to zero at the
segment start, because they started out zero and we just checked that we
don't do anything to them before we hit the segment start.
Similarly, now that the silly pressure testing is gone, it is obvious
that the code for "i < cur" and "i == curr" cases is identical, and the
two cases can just be collapsed.
Signed-off-by: Linus Torvalds <torvalds@ linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the function fill_missing_tank_pressures(), we only ever call
get_pr_interpolate_data() if "pressure" is zero. So passing it in as an
argument, and then testing whether it is zero or not, is just totally
pointless, and only obfuscates things.
This whole thing seems to be due to people editing the code over time,
with the tests becoming superfluous as the code around it changed, and
nobody looking at whether it actually made sense any more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Don't allow negative depth or depth beyond 500m.
Additional checks that the gas mix is possible (even thought QML code
SHOULD only allow valid combinations).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The input is restricted to
EAN100
EANxx (with 'x' one of 0..9)
AIR
xx/xx (with 'x' one of 0..9)
xxx (with 'x' one of 0..9 and the number <= 100)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We (ab)use fake_dc() to create a pleasing profile for a manually added
dive. Based on it's intended use, fake_dc() simply handed back a dc
structure that pointed at staticly allocated samples - that's obviously
(now that I think about it) going to blow up in my face if I edit a
manually added dive more than once.
So now we have an option for fake_dc() to actually allocate the samples -
this way the rest of the code can treat these samples as we would treat
samples created any other way. We can free them and replace them with a
new set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise we might end up trying to free them a second time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We only need to deal with this if the dive changed. And in that case, if
we calculate a new fake DC, we need to clear out the meandepth as
otherwise the algorithm will try to match both max and mean depth. Since
the user potentially changed the max depth that could have very odd
consequences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When the user explicitly sets the units when editing or adding dives, we
used to change the display preferences. This was changed for some but not
all fields in commit 6252d0cd3bda ("While parsing weight and pressure we
should not change the users settings")
Now we do this consistently for all inputs.
Also, when editing the depth of a manually added dive, we now throw away
the samples (as those are certain to be inconsistent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- coding style (ugh - I should have fixed that when I first committed them)
- remove redundant variables
- add similar code to the length and temperature helpers
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Marco Martin
Dirk Hohndel
Linus Torvalds
Lubomir I. Ivanov
Robert C. Helling
Miika Turkia