| Age | Commit message (Collapse) | Author |
|---|
|
The DiveTripModels are sorted in *reverse* chronological order.
Therefore, when comparing a dive against a trip, the dive has
to be inserted if the dive has a *later* date. Change the
comparison accordingly.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The generic addInBatches() function is used to add batches of
contiguous sets of dives to the dive-list models. The loop
searching for the end of the batch used the wrong index and
would therefore not properly cut the batches.
Fix this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Commit 6dc1d239f81f16133d5954bd2b21ffa0c2dcc755 introduced a
well-defined sort order in the case of equal contents. It changed
the code for sorting by date to simply use the order of the
source model.
BUT: The source-model was already sorted in descending order
on date. Thus setting the default order on descening by date,
the data was then presented as *ascending* by date.
Change this back to descending by always using default-ascending
in the filter model.
Ultimately, the source model should simply reflect the ordering
of the core-data (ascending on date), but such a change is
too invasive shortly before release.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Add an "important" message that the support is experimental
and that the latest version of Windows 10 and drivers is needed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
For unrecognized locales we use en_US by default. It makes much more sense for
South Africa to use en_GB.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Pull current translations from Transifex and add the new numerus cases to the
en_US 'translation'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The dive list was sorted using the default-sorter of
QSortFilterProxy model. This is mighty inflexible as it
considers only one column. This has the funky effect that
for rows with identical elements, the sort order depends
on the previous sorting.
Implement a lessThan() function in the MultiFilterSortModel,
which simply hands the sorting down to the actual model.
This might be considered a layering violation, but it makes
things so much easier.
Sadly, it seems like the column-to-be-sorted is transported
in the provided indices. Therefore, the comparison is chosen
using a switch for *every* comparison. It would seem much
more logical to set a function pointer once and use that.
Further investigations are necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
DiveListView::reload() was called for full reset of the dive list
and for changing the view (tree vs. lis) in DiveListView::headerClicked().
Since the latter does sorting by itself, a parameter "forceSort" was
introduced, which defaulted to true, but was set to false by
DiveListView::headerClicked().
To remove complexity, simply let DiveListView::headerClicked() set
the view by itself and remove tha parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The QHeaderView::sectionPressed() signal was connected everytime
the list-view was reset. Likewise, setSectionsClickable() was
set to true everythime the list-view was reset.
Once in the constructor is enough.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The data-flow from C-core to list-view is as follows:
C-core --> DiveTripModel --> MultiSortFilterModel --> DiveListView
The control-flow, on the other hand, differs as DiveListView
accesses both MultiSortFilterModel and DiveTripModel, whereas
MultiSortFilterModel is mostly unaware of its source model.
This is in principle legitimate, as the MultiSortFilterModel might
be used for different sources. In our particular case, this is
not so. MultiSortFilterModel is written for a particular use case.
Therefore, model control-flow follow after data-flow: Let MultiSortFilterModel
set its own source model and DiveListView access the MultiSortFilterModel,
which then manages its source model.
This is not bike-shedding, but will enable a more flexible and
higher-performance sorting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Even though the height was zero, when pulling down the dive list for refresh,
the filter input line would still be visible. With this fix it no longer is.
Also remove unused property.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And fix a crash very similar to the previous commit. When trying to
save (to git) with an empty dive site, ssrf crashes.
Again, add a simple guard to prevent this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Import dives from a DC, and have ssrf started in verbose mode. After
downloading dives, hit ok, to add them to the dive list. This crashes
as we cannot get the uuid from the null dive site.
Added a simple guard to fix this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
In commit 920eb7576ff3c5fab19c12b7b291042817422ac5 "dive_site *"
was included in Qt's "metatype" system to be able to pass it
through QVariants. One instance was forgotten and a "void *"
was passed in. On readout NULL was returned, which made it
impossible to add new dive-sites under certain circumstances.
Convert this one instance to a proper "dive_site *" QVariant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Required to be able to push test builds to TestFlight.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With the fixed sematics of get_gasmix to return the new gasmix for
the time of a gas switch (added comments to make this clear), in the
OTU calculation we need the previous gasmix for the interval up to the
current time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This tests for the planner getting the gases in the
manually entered part of the dive wrong (as here: from
incorrect value returned by get_gasmix_at_time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This fixes a subtle bug introduced in 5c4569247a31c which
unified two functions finding the gasmix at a given time
during the dive. There was a slight difference, though:
Does a gaschange exactly at that time count or not? For
the planner to work, the answer has to be in the affirmative.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Now that struct dive_site * is a proper Q_METATYPE it is not
necessary anymore to pass dive-sites as opaque uintptr_t types.
Simply pass a QVariants or directly via dive_site *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since "struct dive_site *" is now a Q_METATYPE, the functions
MapWidgetHelper::centerOnDiveSite() and ::getCoordinates()
can directly get such a pointer instead of a QVariant. This
makes the code nicer to read.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There was this ugly pattern of passing pointers-to-dive_site via
a QVariant of void * type. This is of course inherently unsafe.
Pass these pointers using their proper types instead. This makes
it necessary to register them in Qt's meta-type system. Doing so,
fixes a bug: QML couldn't call into updateDiveSiteCoordinates()
because it didn't know the type and thus the coordinates of
the moved flag were not reflected in the divesite-dialog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To test whether to show a dive, the UUIDs of the filtered-by
location and the dive-site of a dive were compared. Since UUIDs
are unique (as the name implies), directly compare pointers.
Note: this code comes from a time when the filtered-by location
was not a pointer, but a copy.
Moreover, the if tested first for the same name, then (logical-or)
for the same uuid. This makes no sense, as the same dive-site
implies the same name. This code likewise can be explained by
historic reasons: the filtered-by location may have contained
a different name. Swap the order of the conditions: first test
for the same object and only of the objects differ, test for
the same same.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is another case of a weird pattern where an object would
connect it's own signal to the slot of a different object.
There seems to be no reason why the former couldn't simply
call the latter.
Remove the [start|stop]FilterDiveSite signals of LocationInformationWidget
and call the corresponding functions of MultiFilterSortModel directly.
While doing so, replace the UUID argument by a pointer-to-divesite.
It will be converted anyway right at the beginning of the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
MapWidgetHelper::reloadMapLocations() used an array of uuids to
add dive sites to the map only once. Replace this by an array
of pointers. This is a small piece of a larger effort to remove
dive site UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace UUIDs by pointers to dive-site in mobile code. In both
cases, the value is transported via a QVariant. The function
getCoordinatesForUUID(), which was only used from mobile, can
be replaced by a getCoordinatesFor() function taking a variant
supposed to contain a dive-site pointer. Likewise, the variant
of the centerOnDiveSite function is now supposed to wrap a
pointer-to-divesite.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There are two updateDiveSiteCoordinates() member-functions, viz.
in MapWidget and MapWidgetHelper. Adapt them to take a pointer
to dive_site instead of a UUID. This is part of an effort to
replace UUIDs by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the uuid argument to MapWidgetHelper::enterEditMode() by a
pointer. Likewise, adapt the only caller prepareForGetDiveCoordinates().
This is a small step in a bigger effort to replace dive-site UUIDs
by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace UUIDs from LocationInformationModel and fix the fallout.
Notably, replace the UUID "column" by a DIVESITE "column".
Getting pointers through Qt's QVariant is horrible, we'll have
to think about a better solution.
RECENTLY_ADDED_DIVESITE now defines to a special pointer to
struct dive_site (defined as ~0).
This fixes an interesting logic bug:
The old code checked the uuid of the LocationInformationModel (currUuid)
for the value "1", which corresponded to RECENTLY_ADDED_DIVESITE.
If equal, currType would be set to NEW_DIVE_SITE. Later, _currType_
was compared against _RECENTLY_ADDED_DIVESITE_. This would only work
because NEW_DIVE_SITE and RECENTLY_ADDED_DIVESITE both were defined
as 1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The diveSiteSelected signal of DiveLocationLineEdit had the dive-site
UUID as argument. But the receiving slot would not use that argument.
Remove this as a tiny step to remove the UUIDs alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Access to dive-sites in the LocationInformationModel was via UUID.
Replace this by a direct access to the struct dive_site pointer.
Accordingly, rename the UUID_ROLE to DIVESITE_ROLE.
This is a small step in replacing dive-site UUIDs by pointers
throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Another small step in removing dive-site UUIDs: use a pointer
instead of a UUID in the "uemis_helper" structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing uuids, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The uemis downloader uses a cache for location to divesite id.
Trivially, the divesite-uuid can be replaced by a pointer. This
is a tiny step to remove divesite UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
As a first step in removing dive-site uuids, change the interface
of the get_dive_site_*() functions to return pointers instead
of uuids. This makes code a bit more complicated in places where
the uuid is extracted afterwards (needed NULL check). Nevertheless,
these places should disappear once pointers instead of uuids are
stored in the dive-structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
... and makes Qt Creator fail to parse files.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Remove three cases of rememberSelection() which did not possess
the corresponding restoreSelection() twins.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The selection was remembered/restored anytime the sort-order
changed. Yet, this is only necessary if the view (tree, list)
changes. Therefore, handle the selection only if this is the
case.
This automatically fixes the problem of the trip-selection
not being remembered if the view doesn't change. If the view
does change, trip selection is lost. But since the list view
doesn't have trips to start with, losing trip-selection seems
like an understandable behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On desktop, show the a sort indicator to give a visual feedback on changes
of the sort order. This is trivially done by calling the
setSortIndicatorShown() function in DiveListView's constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On desktop, clicking on a column header sorts the dive-list. This
has the interesting property that every click reverses the sort
order (unless changing from list to tree-mode). The much more
common idiom seems to be to define a default sort order for each
column and switch to that when changing sort-column. Switch order
after clicking the same column again.
Implement this more common behavior. For now, sort # and date
in descending, all other columns in ascending order.
While doing this, use the proper enum (NR) for setting the default
sort-column instead of its integer representation (0).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This accessor was never used. This is a small step in splitting
the DiveTripModel in two (list & tree), which means that the
layout is moved up to the view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
And in the process use our script to do the work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 99c06dec3d ("Mobile/filtering: simple busy indicator") we switched to
Controls 2.4 which requires Qt 5.11. Revert that one line of the commit as it
isn't necessary.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Berthold Stoeger
Lubomir I. Ivanov
Dirk Hohndel
Jan Mulder
Robert C. Helling