| Age | Commit message (Collapse) | Author |
|---|
|
Start working on the add dive feature, to enable the user add a
new dive using the mobile UI.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
as it leads to significant cleanup.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far, add_segment() returned a tissue tolerance (i.e. ceiling)
computed just in its return statement. This tissue_tolerance
needed to be dragged around until it was needed or be dropped
if not needed at all.
As for VPM-B, this ceiling computation is a bit expensive, this patch
calls the computation function tissue_tolerance_calc() when the
value is actually needed and not before.
This changes the signature of some functions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
and not some time before and store the result in a global variable.
This stores only the bottom gradients and computes the Boyle compensation
when computing the allowed ambient pressure.
As the Boyle compensation needs a reference ambient pressure, to find the ceiling,
we have to iterate this computation until the reference pressure is close enough to
the ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... as the former was introduced only in Qt 5.5 in order to make the
test build also with 5.4
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
libdivecomputer might call us with DC_SAMPLE_PPO2 multiple times, which
means multiple sensors.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
DC_SAMPLE_PPO2 represents a known ppO2, and not a setpoint.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In libgit2 0.22 tree_flags was called flags.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply tag the beta versions correctly and none of this is needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A real ceiling is the ceiling calculated when the ambient pressure is at the
ceiling. As such, the Boyle's law compensation should be done against the
ambient pressure at the ceiling. Instead of doing an iterative calculation,
take the lesser ambient pressure of the ceiling of the previous sample, and the
depth of the current sample.
This approach gets rid of "blips" in the calculated ceiling due to a step in
Boyle's law compensation during ascent. In limited testing, it also appears to
avoid creating a ceiling deeper than the calculated plan in most cases.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If adjacent samples at times t0 and t1 are greater than time_stepsize apart,
this for loop steps through the time between samples to calculate tissue
tolerance incrementally at each intermediate time, j, (and interpolated depth).
If the difference between t1 and t0 is not a multiple of time_stepsize,
immediately before the final increment time_stepsize needs to be reduced to
t1 - j so that j = t1 in the final increment.
This is necessary when:
t1 - j < time_stepsize (i.e. we are about to start the final
increment, and time_stepsize needs to be
reduced), and
j < t1 (i.e. we didn't just do the final increment -
without this condition time_stepsize would be
set to zero, leading to an infinite loop)
Previously, the check was (j - t0 < time_stepsize), which always returns false.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Assume your V2 file contains two locations with different name but
identical GPS location. "Blue Corner" and "Blue Corner, Palau". And you
have many dives there.
When reading a V2 file the GPS is read first and a dive site is looked up
based on that. Let's assume the lookup by gps finds "Blue Corner, Palau".
Now every time we get the "Blue Corner" site in the V2 file we look up
the GPS, get "Blue Corner, Palau" as dive site, then read the name "Blue
Corner" and say "oops, different site" and create a new one. Resulting in
several dive sites named "Blue Corner" with identical GPS but different
UUID (as we add the dive time into the SHA for the deterministic UUID).
With this commit, if we have a dive site that matches the GPS but has a
different name, we check if we happen to have an exact match for the dive
site information from the XML file (and use it, if we have it) before
creating a new dive site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixing this error makes TestPlan pass again.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The UI detects when it should refresh the loction after the
user finished editting a divesite. Creating and editting
divesites is now working even when the current dive is not
saved yet.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should compare the calculated runtime against the runtime previously
calculated by Subsurface, expecting them to match exactly, in order to detect if
a change has been made. We still compare against a benchmark, allowing some
difference.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now do the first_ceiling_pressure calculation at the start of the CVA loop.
We don't need to do it before.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should run clear_deco as early as we can. We should calculate the nuclear
regeneration and start gradient after calculating tissue tolerance. We don't
need to redo nuclear regeration and start gradient after that.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By calculating crushing pressure after the manually entered phase, we were doing
it wrong for multi-level dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Inspired gas loading equations depend on the partial pressure of inert gas in
the alveolar.
P_alv = (P_amb - P_H2O + (1 - Rq) / Rq * P_CO2) * f
where:
P_alv alveolar partial pressure of inert gas
P_amb ambient pressure
P_H2O water vapour partial pressure = ~0.0627 bar
P_CO2 carbon dioxide partial pressure = ~0.0534 bar
Rq respiratory quotient (O2 consumption / CO2 production)
f fraction of inert gas
In our calculations, we simplify this to use an effective water vapour pressure
WV = P_H20 - (1 - Rq) / Rq * P_CO2
Buhlmann ignored the contribution of CO2 (i.e. Rq = 1.0), whereas Schreiner
adopted Rq = 0.8.
WV_Buhlmann = PP_H2O = 0.0627 bar
WV_Schreiner = 0.0627 - (1 - 0.8) / Rq * 0.0534 = 0.0493 bar
Buhlmann calculations use the Buhlmann value, VPM-B calculations use the
Schreiner value.
Concept explained here:
http://www.divetable.de/workshop/V1_e.htm
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In other implementations of VPM-B, surface_tension_gamma and
skin_compression_gammaC are taken as 0.0179 N/msw and 0.257 N/msw respectively.
We do pressure calculations in bar, not msw, so our gamma values need to reflect
that. Previously we had used 0.179 and 2.57, which are close but not quite
correct (10 msw == 1.01325 bar).
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is useful for determining why we calculate a difference profile
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Update the tooltip and enable only when there is a divesite selected
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use clicked instead of activated signal on the completerList to
handle the selection of a divesite.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A divesite uuid is created using the timestamp of the currently
selected dive. When there is no current_dive, use the current
time to create a uuid.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While I cannot explain for the life of me why this worked on Linux and
Windows and not on Mac, what I have now seems to work on all three
platforms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And add a small message that two potential ERRORS that are thrown in the
deploy step are actually harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A git pull seems to cause things to go wrong. Just fetching the repository
and checking out the version that we want seems to work better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If localDevice isn't valid we never initialize the discory agent, so
let's not dereference it in the destructor unless it is valid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These were left unused by cleaning up the import function parameters.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Continuing the crusade against excessive number of parameters for some
functions. This should be the last of the import functions to be cleaned
up.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The pressure for the Boyle compensation is of the first ceiling,
i.e. the ceiling seen from the bottom rather than the first
stop.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They now reference the Subsurface-branch branches of Marble and
libdivecomputer and v0.23.1 of libgit2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
At least on Ubuntu with xfce instead of Unity this appears to be necessary
to get a menu bar for the application.
Fixes #833
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Copying Dirk's answer to our user forum to FAQ.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When, in a dive edit mode user entered a dive site
and went to dive site edit mode then finished the ds
edit, the app would lose the disabled property of the
dive list, making it possible to select a new dive
when we where editing another one, complete mess.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user clicks on the first or second option of the drop
down list, subsurface will move him to the dive site edit panel
automatically, since it's a new dive site and there's no information
about it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we are in display dive mode, and then edit the
location text edit, going to edit dive mode, the location
text edit will be moved a bit below of it's original position
but the Dive Site List would be already opened, and stuck
on it's original position, covering the dive list.
This patch fixes that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Moved the get taxonomy button from the maintab to the edit dive site
widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Grace Karanja
Robert C. Helling
Anton Lundin
Dirk Hohndel
Rick Walsh
Sander Kleijwegt
Miika Turkia
Sander Kleijwegt
Tomaz Canabrava