| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With the removal of the transport tags from our libdivecomputer branch,
we can no longer automate the table creation that way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So because I merged with upstream libdivecomputer, and it no longer does
the "halfduplex emulation" thing in the IO layer, and instead does it in
the only Suunto backend that needed it, that also affected our custom IO
layer in subsurface.
Sure, I could have left a dummy interface and left subsurface with some
ugly dead code, but it's really better to just get rid of the code.
So when Dirk pulls in the libdivecomputer updates from
https://github.com/torvalds/libdc-for-dirk.git Subsurface-branch
this patch to remove the halfduplex code in subsurface is also needed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
PSCR dives with o2 sensors are more like CCR dives. The math is exactly
the same, its just a different diluent and a different po2.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
This introduces a fixup function that walks all the samples and
populates the no_o2sensors if its zero and supposed to be something
else.
There is a bug somewhere which Willem hit, causing this to never be set.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
In the if case above, we already conclude its a OC dive, but its cleaner
to actually pass the current mode instead of a hard coded value.
This also makes the code less prune to future bugs.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
registerError() may be called from a different thread context. Passing
the message as a const-reference may lead to a dangling reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
When the slot pageStack.onCurrentItemChanged() is reached
make sure that the stackView becomes non-interactive.
This prevents swiping left on the map to "go back".
Also, always reload the map markers when the map becomes visible.
This is not optimal and instead something in the lines of:
DiveList.model.onChanged()
is a much better solution.
Ideally the map reload should happen on dive removal, dive addition,
dive edits and sync from cloud.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This action uses the Breeze icon "map-globe.svg" and calls
showMap().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
showMap() uses a location to open Google Maps in a browser.
Make showMap() a generic function to push the mapPage on the view
stack.
Update the calls to this function from child widgets and pages.
Also either call mapPage.centerOnLocation()
or mapPage.centerOnDiveSiteUUID() depending if the caller
wants the map to center on a dive site or on map coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
1) QML files
2) Map widget specific icons
3) The Breeze map-globe.svg icon
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The Page object has the following functionality:
- reloadMap(): reload all map markers.
- centerOnDiveSiteUUID(): center the map on a dive site uuid.
- centerOnLocation(): the map on a latitude, longitude in decimal.
- Select a dive list entry based on a marker selected on the map via
diveList.setCurrentDiveListIndex()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The signal to emit is selectedDivesChanged() and it accepts
a list if diveIds. The 'nSelectedDives' counter is redundant.
Also expose the 'map' and 'mapHelper' objects as aliases.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Add the setCurrentDiveListIndex() wrapper for:
diveListView.currentIndex = idx
wich also makes it possible to disable the scroll animation when
selecting dive list indexes which are too far apart.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The mobile version is limited as it does not support dive list
selection of multiple dives and editing multiple dives.
Also the dive list on mobile does not follow the same indexing as
the desktop version dive list.
Use the SUBSURFACE_MOBILE macro and for:
- centerOnDiveSite() either deselect map markers or center on
a single one (never on a rectangle like the desktop version)
- selectedLocationChanged() and selectVisibleLocations() return
a list of single dive ID
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
centerOnDiveSiteUUID() is a helper to center the map on a dive_site
UUID instead of a dive_site pointer.
Make it call centerOnDiveSite().
Make both this function and reloadMapLocations() Q_INVOKABLE
as these are going to be called from QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Add the following includes in the header -
<QVariant> and <QGeoCoordinate> otherwise the
mobile build fails.
It is unclear how the desktop build does not complain
about this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The map widget on the mobile version requires that
a dive object from a model has a dive_site uuid.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Use one of the breeze icons for the map in the drawer
on the mobile version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Add two release note items and change comment in CHANGELOG.md file.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Consistently do not use a space between value and unit.
Consistently do not use a space between "name:" and value.
Add "/min" for SAC rate.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
The hash field in the picture-structure was in principle non-operational.
It was set on loading, but never actually changed. The authoritative
hash comes from the filename->hash map.
Therefore, make this explicit by removing the hash field from the
picture structure.
Instead of filling the picture structure on loading, add the
hash directly to the filename->hash map. This is done in the
register_hash() function, which does not overwrite old entries.
I.e. the local hash has priority over the save-file. This
policy might be refined in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Passing of QStrings and QByteArrays was inconsistent in qthelper.cpp.
Unify to passing const-references. Passing by value is no big deal, since
QString and QByteArray do copy-on-write "optimization". Nevertheless, let's
keep it as consistent and effective as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
learnHash() was always called in conjunction with add_hash(). The
pattern was that a local filename and a hash were connected in
the hash-to-filename and the filename-to-hash maps. Then, the
original picture-filename or url were registered in the filename-to-hash
map.
This commit changes learnHash() to take three parameters (original-filename,
local-filename and hash) and do all of the above. The new code is
simpler because no dummy picture struct has to be generated in
DiveListView::loadImageFromURL().
The tests were extended to check for all hash<->filename associations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
learnHash() is called either on a local picture structure
[DiveListView::loadImageFromURL()] or on a cloned picture structure
[ImageDownloader::saveImage()]. In neither case the picture structure
is passed to the frontend. Therefore, storing the new hash in the
picture struct is not necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
hashPicture() calls hashFile(), which calls add_hash(). add_hash()
updates the filename-to-hash and hash-to-filename maps. Therefore,
there is no point in calling learnHash() in hashPicture(), which
updates the filename-to-hash map.
Note that learnHash() updates the picture-struct with the new hash,
but since hashPicture() works on a cloned picture-struct, which
is free()d in hashPicture(), these changes are lost anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
updateHash() and hashPicture() did the same thing, with the exception
that hashPicture() marked the dive list as changed if a hash changed.
This seems like a good idea in any case, therefore always use
hashPicture().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The function is only used in the qthelper.cpp translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Don't do busy-waiting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No point in move-constructing from a different default constructed
QImage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If loading from hash failed in the saveImage() slot(!) it would
recurse into loadFromUrl(), which would generate a new network
reply. Very scary and a (small) wonder that it worked.
Let's try to make this all more explicit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The QNetworkAccessManager is only used in the load() function. No
point in it being a subobject.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
1) Destroying the QNetworkManager seems like a bug: this was a
subobject of ImageDonwloader. It's mysterious how this didn't
crash.
2) Instead of calling deleteLater() on the reply object, simply
delete it after completion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
A cloned picture struct would not be freed if the filename was already
in the queued-for-download set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Remove superfluous QString constructions in a couple of simple functions
in divetripmodel.cpp
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Replace snprintf() and put_format() by snprintf_loc() and
put_format_loc(), respectively to localize formatting of
integers and floats.
Acked-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace snprintf() and put_format() by snprintf_loc() and
put_format_loc(), respectively to localize formatting of
integers and floats.
Acked-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This commit introduces functions:
- QString asprintf_loc(const char *cformat, ...);
- int snprintf_loc(char *dst, size_t size, const char *cformat, ...);
- put_format_loc(struct membuffer *, const char *fmt, ...);
and their va_arg equivalents, which use Qt's QString::arg() formatting
options to render the strings.
The snprintf_loc() function takes care not to truncate multi-byte
UTF-8 encodings. Thus, on overflow, the resulting string might be
shorter than size-1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Always set the update firmware button correctly based on DC model.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
In the configure dive computer dialog change the order of the DCs
(all HW first, then Suunto) and correct the names of some HW DCs
(make them the same as in the "download from DC selection list").
Plus added the OSTC Plus to the list of supported DC.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Correctly spell OSTC cR (wrong: "Cr") in two files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
Dirk Hohndel
Linus Torvalds
Anton Lundin
Berthold Stoeger
Lubomir I. Ivanov
Stefan Fuchs