| Age | Commit message (Collapse) | Author |
|---|
|
This allows for better scaling of the UI.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add option "-src-dir <source directory>" to build options.
When calling build.sh without -src-dir it uses src/subsurface as usual, but when called
with -src-dir <source directory>, it uses src/<source directory> as source basis.
This is a needed option, when working with "git worktree", which is used when working on
different branches in parallel (e.g. master and my-feature-branch), because it allows a
build directory in each worktree, and thus much faster when switching work.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
For METRIC and IMPERIAL, show the radiobuttons disabled
For PERSONALIZED, allow user to select individual units.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Change to radiobuttons for units, and add a third choice (personalize).
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
These are test files enabling a test of the import of dive
coordinates from GPS
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
This shouldn't be part of the desktop UI code; there's still the issue that we
really shouldn't hand code XML parsing, but I'll leave that for later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows Subsurface to obtain the coordinates of a dive directly
from a GPS track. It parses a GPX file (GPX V1.0 or V1.1) from
a GPS to locate the trackpoint immediatedly after the start of a
dive. There is an additional "Use GPS file" button in the Edit Dive
Site panel that is selected from the Notes tab. Image:
This allows one to select a GPX file, bringing up the Import GPS
dialog.
There is extensive provision for cross-checking that the dive track
synchronises with the dive start and end. If the Save button in the
dialog is pressed the dive coordinates are copied into the Dive
Coordinates text box in the Edit Dive Site panel. The map moves
to indicate the location of the dive site.
The bulk of the work is done in importgps.cpp. The code is
pretty intergrated: I tried to break it up in smaller commits but that
was not feasible.
The code includes responses to the comments by @neolit123 and
@bstoeger. The C-based file input was replaced with Qt-based
code using QChar, QString and QFile.
[Dirk Hohndel: fixed several small issues in the .ui file, removed
various headers includes that weren't needed and
fixed printing of minutes as zero padded]
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Ascent/Descent rate functions are fully implemented in diveplannermodel,
therefore remove these functions.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use Backend instead of Planner for ascent/descent variables.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make ascent/descent rates available to QML through the Backend interface.
Remark signals from qPrefDivePlanner is used because the diveplanner model
sets qPrefDivePlanner but does not issue its own signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The spinboxes are already connected to diveplannermodel set_ functions, remove
second connect to plannerShared.
Change get functions to use diveplannermodel.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
diveplannermodel already contains set_<asc/desc> function that convert from
screen value to real value; this adds get functions that convert real value to
screen value, so now all conversions are done in one place.
Use prefix Display to identify this is values prepared for the UI (both desktop
and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was requested in a 'bug report' by a user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
prefs.unit_system is set at the top, so no need to set it again.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
prefs.unit = x needs to be after the setters are called, otherwise the setter
will not do anything, and result in an inconsistency between the values stored
on disk and in prefs.units.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove string version of unit_system, duration_units, length, pressure,
temperature, vertical_speed_time, and volume, including tests and make signals
strongly typed in C++
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Register enums to allow them to be used in signal handlers instead of int.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Change Settings and DivePlannerSetup to use the strongly typed enums
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add qPrefUnit Q_PROPERTY but using QMLInterface enums, that way
all variables become strongly typed in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Create section advanced around the remaining gridlayouts, and adjust.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Move gridlayout unit_settings to TemplateSection units, without changing
anything (apart from adding a visible: attribute).
Removed first label in units_settings, since it is the title of the section
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Move gridlayout themesetting to TemplateSection theme and use the
TemplateTitle. Also switch from using PrefDisplay.mobile_scale to
subsurfaceTheme.currentScale
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
move gridlayout divecomputers to TemplateSection general, without changing
anything (apart from adding a visible: attribute and replacing the Rectangle
used to draw a line at the bottom with a TemplateLine on top.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
move gridlayout defaultCylinder to TemplateSection general, without changing
anything (apart from adding a visible: attribute and replacing the Rectangle
used to draw a line at the end with a TemplateLine at the top).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
move gridlayout cloudSettings to TemplateSection general, without changing
anything (apart from adding a visible: attribute and removing the rectangle
used to create a line).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
ColumnLayout does not work well with TemplateSection,
so change to Column
Add TemplateSection "General Settings"
"General Settings" are open when visiting page first time.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
bump import versions to reflect Qt 5.12
and remove unused imports
remark QtQuick 1 and QtQuick.Controls 1 are depreciated since Qt 5.12
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Replace Control.TextEdit with TemplateTextEdit, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Replace Control.ComboBox with TemplateComboBox, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Replace Control.label with TemplateLabel, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Replace CloudStatus.<value> with backend.<value> as part
of making enum sharing between C/C++ and QML more robust.
Replace PrefCloudStorage.verification_status with
backend.verification_status to use the strongly typed function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add CLOUD_STATUS enum to interface.
Add cloud_verifification_status variable to interface, and make
it strongly typed in QML.
using backend.cloud_verification_status = 1 will fail but
backend.cloud_verification_status = backend.CS_UNKNOWN is correct.
Added note to the original definitions of the enums that they have been
duplicated.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
call setup with registration of QML interface class
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add a header file that contains a duplicate of the enums,
that are needed in QML in one class.
the unit enums are added imidiatly, since they are needed
or will be neede shortly in Settings and DivePlannerSettings
This class will also contain Q_PROPERTY and signal/slot for
variables used in QML. This is done to allow e.g.
deco_mode qPrefUnits::planner_deco_mode()
void qPrefUnits::set_planner_deco_mode(deco_mode)
as strongly typed in C++
and
DECO_MODE planner_deco_mode()
void set_planner_deco_mode(DECO_MODE)
as strongly typed in QML
Remark: wrong assignments gives errors in QML
The advantage over using strings or the value directly is that
QML detects typos and flags them as errors/warnings.
It is important to note that the class may only contain
a) a function call to the implementation
b) a reference to a global variable e.g. prefs.
Added note to the original definitions of the enums that they
have been duplicated.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
add missing colors so that dark theme contains the
same colors as "colors in use".
Update the darkTheme() to correctly copy colors from
pink theme
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
add missing colors so that pink theme contains the
same colors as "colors in use".
Update the pinkTheme() to correctly copy colors from
pink theme
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
add missing colors so that blue theme contains the
same colors as "colors in use".
Update the blueTheme() to correctly copy colors from
blue theme
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
move contrastAccentColor, lightDrawerColor
to block of used colors in order to avoid confusion.
move darkDrawerColor to dark theme.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
changed != --> !==
and == --> ===
to make QML happy.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Remove reference to columnWidth, because it is
not defined in main.qml (subsurfaceTheme).
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
change qPrefGeneral.default_cylinder -> qPrefEquipment.default_cylinder
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
default_cylinder was moved from PrefGeneral to PrefEquipment,
but Settings was not updated
update Settings.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
PrefClearDC was registred with the wrong object, but also
is not used.
Remove registration.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
jan Iversen
willemferguson
Dirk Hohndel
jan Iversen