| Age | Commit message (Collapse) | Author |
|---|
|
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In some case the scaling (real value <-> UI value) is different
for mobile and desktop. In order to make the difference understandable
comments are added to each function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove comment that was very false (next line contradicted the comment).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
setBottomSac, setDecoSac and setFactor in diveplannermodel
receives display value which are then converted.
subsurface-mobile have slightly different values, move the
correction of these from plannershared to diveplannermodel, in
order to keep the whole convert in one place.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove Q_PROPERTY and signals from plannershared, since they are
no longer used (transferred to qmlinterface).
Unregister object plannershared, since it is no longer used in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
The real values are 1.0 to 10.0, but QML needs int so mobile
gets values 10.0 to 100.0
add sacfactor() to QMLInterface and update QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Length variables are updated from the QML and desktop directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Ascent/Descent rate functions are fully implemented in diveplannermodel,
therefore remove these functions.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows to update plannermodel etc. and thus avoiding a restart when
changing units for length.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Divided by 1000 (int) instead of 1000.0 (float)
which caused precision problems.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Correct copy/paste error, set_verbatim_plan() should not call
setSacFactor() but setVerbatim().
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Test show that the ratings calculations were off by +/- 1, due
to rounding errors. Found due to test cases in tests (other commits)
The calculations are copied 1-1 from diveplanner.cpp, but are
used slightly different in plannerShared.cpp
Correct calculations, by securing the calculation is done
with float precision and the rounded with lrint().
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Add
display_runtime
display_duration
display_transitions
verbatim_plan
display_variations
Get is direct from qPrefDivePlanner and set is plannerModel
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use plannerShared setter to update o2narcotic. This will also signal
the cylindermodel to calculate a new bestmix.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add include of cylinderModel
Add o2narcotic
the set function is special because it first
informs the plannerModel that there is a new value
and then ask cylindermodel to calculate a new bestmix
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
bottomsac
decosac
problemsolvingtime
sacfactor
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner and converted
Variables:
min_switch_duration
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
drop_stone_mode
last_stop
switch_at_req_stop
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Variables:
dobailout
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
planner_deco_mode
reserveGas
safetyStop
gflow
gfhigh
vpmb_conservatism
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
Berthold Stoeger
jan Iversen