| Age | Commit message (Collapse) | Author |
|---|
|
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
[Dirk Hohndel: extracted from a larger commit from Jan]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There were quite a few issues with the code - clearly a complete failure of
code review.
- all values were '??' if a period contained no dives
- imperial units were not calculated at all
- significant truncation and data loss in the way totals were added as meters
and minutes instead of the higher precision data that is available
- several issues in striing conversion methodology, e.g. missing zero padding
for minutes
- missing maxSac
- incorrectly calculated avgSac
- incorrectly claculated number of EANx dives
- hard to read code with most variables named 'temp'
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Do not count dives where SAC == 0.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Create DiveSummary class in backend-shared and make the DiveSummary calculation
results available to QML.
This adds a loop over all dives (could have been done with a model, but the
models available to mobile are very limited, so use the basic way).
[Dirk Hohndel: renamed the results variable and combined a couple of commits]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In some case the scaling (real value <-> UI value) is different
for mobile and desktop. In order to make the difference understandable
comments are added to each function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove comment that was very false (next line contradicted the comment).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
setBottomSac, setDecoSac and setFactor in diveplannermodel
receives display value which are then converted.
subsurface-mobile have slightly different values, move the
correction of these from plannershared to diveplannermodel, in
order to keep the whole convert in one place.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove Q_PROPERTY and signals from plannershared, since they are
no longer used (transferred to qmlinterface).
Unregister object plannershared, since it is no longer used in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
The real values are 1.0 to 10.0, but QML needs int so mobile
gets values 10.0 to 100.0
add sacfactor() to QMLInterface and update QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Length variables are updated from the QML and desktop directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Ascent/Descent rate functions are fully implemented in diveplannermodel,
therefore remove these functions.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows to update plannermodel etc. and thus avoiding a restart when
changing units for length.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Divided by 1000 (int) instead of 1000.0 (float)
which caused precision problems.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Correct copy/paste error, set_verbatim_plan() should not call
setSacFactor() but setVerbatim().
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Test show that the ratings calculations were off by +/- 1, due
to rounding errors. Found due to test cases in tests (other commits)
The calculations are copied 1-1 from diveplanner.cpp, but are
used slightly different in plannerShared.cpp
Correct calculations, by securing the calculation is done
with float precision and the rounded with lrint().
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Add
display_runtime
display_duration
display_transitions
verbatim_plan
display_variations
Get is direct from qPrefDivePlanner and set is plannerModel
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use plannerShared setter to update o2narcotic. This will also signal
the cylindermodel to calculate a new bestmix.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add include of cylinderModel
Add o2narcotic
the set function is special because it first
informs the plannerModel that there is a new value
and then ask cylindermodel to calculate a new bestmix
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
bottomsac
decosac
problemsolvingtime
sacfactor
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner and converted
Variables:
min_switch_duration
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
drop_stone_mode
last_stop
switch_at_req_stop
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Variables:
dobailout
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
planner_deco_mode
reserveGas
safetyStop
gflow
gfhigh
vpmb_conservatism
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
WARNING: multi directory commit, needed to secure it builds.
leaving the shared backend sources in core, imposes a severe limitation,
that they cannot make use of e.g. qt-models, because that is created
after core (first library to be created).
The shared backend uses functionality from core and qt-models, so it
must be created when those are available and before desktop-widgets
or mobile-widgets are created.
Make a new root directory "backend-shared" with empty CMakeLists.txt
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
Berthold Stoeger
jan Iversen
Dirk Hohndel