| Age | Commit message (Collapse) | Author |
|---|
|
The list of known tank types were kept in a fixed size table.
Instead, use a dynamic table with our horrendous table macros.
This is more flexible and sensible.
While doing this, clean up the TankInfoModel, which was leaking
memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is unrelated to struct dive and also wasn't defined in
dive.c
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In a previous commit, auto-filling of weight based on type was
changed to be only performed if the user hadn't already set a
weight, by testing for weight=0.
However, when the user edited the type and tabbed back and forth,
that counted as an edit and therefore the weight would not
change anymore.
To refine this, introduce an "auto_filled" flag to the weightsystem,
which is set if the weight is automatically filled and cleared if
the weight is edited. Update the weight if it was zero *or* auto-filled.
The flag is not saved to disk, but that should be acceptable. If the
user saves and reloads, we can assume that they meant the weight
to be set to the default value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since this doesn't touch struct dive, dive.c is not an appropriate
place for this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Don't overwrite the full cylinder when editing a single field.
Implement three "modes": editing of type, pressure and gasmix.
Don't consider individual fields, because some of them are
related. E.g. you can change the gasmix by setting the MOD.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The last user was uses a more general function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Moreover, move the declaration from dive.h to equipment.h.
The result is a) more consistent and b) more logical.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Turn the code in CylindersModel that creates a new cylinder for
addition into its own function to avoid code duplication. This
will be used from the undo commands.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We have a set_weightsystem() function. For symmetry, introduce
a set_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The cylinder undo commands will keep a copy of a cylinder
and therefore need the ability to free a cylinder object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We have a clone_weightsystem function. For symmetry, introduce
a clone_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This deals with the issue of initializing structs in C++.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of freeing internal data of the weightsystem structure,
call the free_weightsystem function (which has to be made extern
at first). This makes things more future-proof, should the
weightsystem struct ever be extended.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To make things more future-proof, introduce an empty_weightsystem
constant. Replace explicit aggragate initialization of empty
weightsystems by this constant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
As a convenience, return the cylinder from add_empty_cylinder()
to spare the caller from the nasty expression to fetch the
last cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Thus, future callers will not have to include the monster dive.h
include if they just want to copy cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This function was used to count the number of weightsystems
used in a dive. Since the weightsysems are now collected
in a dynamic table it became unused. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This will be used later when joining and editing dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since this function doesn't act on a dive and is only related
to cylinders, move it to equipment.c and equipment.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Last users were removed in 34db6dc2bea6173c070c9820a2e57a511b9ca0b1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The last direct user of the used parameter was removed in
16276faa45279817e363367550a6a37c179251f7, the last actual user in
e2bbd0ceecff7193bb272430fbebfc4b02dd67c3.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
add_cylinder_description() and add_weightsystem_description() don't
modify their input parameter. constify them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
But only functions that operate only on gases. Functions concerning
cylinders or dives remain in dive.c or are moved to equipment.c
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There is an equipment.c file, but no corresponding header. Move the
corresponding functions into a newly created header. This does not
improve compile time since, at least for now, equipment.h is included
in dive.h. But it makes things more consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Berthold Stoeger
Dirk Hohndel