summaryrefslogtreecommitdiffstats
path: root/core/subsurface-qt/SettingsObjectWrapper.cpp
AgeCommit message (Collapse)Author
2017-10-29Remove three obsolete preferences options for geocodingGravatar Stefan Fuchs
These options are not used any longer/were never used and can be removed to not confuse the users. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-09Display units in dive list table based on prefs optionGravatar Stefan Fuchs
Add a preferences option which enables or disables display of units in the main dive liste table. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-09-20Remove option to apply GFlow at maxdepthGravatar Robert C. Helling
This option should have never been there. This is not how gradient factors are supposed to work. It would only trick users to use the wrong value.. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-09-20Add a checkbox to turn off plan variationsGravatar Robert C. Helling
... as those come with a performance penalty Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-06Wire up duration units preference UIGravatar Dirk Hohndel
Now we track the preference, but we don't act on it, yet. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-29Add SPDX header to remaining core filesGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-28minimal pO2 threshold: split max threshold into min and maxGravatar Jan Mulder
Nothing really special here. Just a split of the only p02 max threshold into a min threshold and max threshold, and the adaptation of the UI. Change of translatable strings included. ref: https://github.com/Subsurface-divelog/subsurface/issues/259 Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-03-11Minimum gas calculation - Calculations and UI parametersGravatar Stefan Fuchs
Add minimum gas calculation to planner output. Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime. Connect UI signals and slots for recalculation of diveplan. Disable minimum gas calculation if there was already a warning before. If minimum gas result is larger then cylinder start pressure give warning message instead of result. Add line break before pO2 warnings but only if warnings exist. Signed-off-by: Joachim Ritter <jritter@bitsenke.de> Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-01-06Rename prefs.deco_mode to prefs.planner_deco_modeGravatar Robert C. Helling
This is to avoid confusion with planner.display_deco_mode. When accessing the "current deco mode" use the decoMode() helper function. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2016-11-01Deco mode for plannining is not deco mode for showingGravatar Tomaz Canabrava
We had (in the wrong place, imo) a new feature that should differentiate the different deco_modes, you could plan your dive in buelhman and see it in vpm-b, for instance but both of them accessed the same pref. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01More preference handling fixesGravatar Tomaz Canabrava
Remove a few uneeded lines and add more loading code for the preferences. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01Use default prefs for the prefs that where missingGravatar Tomaz Canabrava
This patch fixes all the cases that I didn't checked for the default prefs. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01use GET_* macros for getting settingsGravatar Tomaz Canabrava
Those macros are nice because they take into consideration the default preferences. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01Load use_system_languageGravatar Tomaz Canabrava
Forgot to load use_system_language, wich borked the preferences. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01Remember to load the languageGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01Fix bug where the Font setting was ignoredGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01Preferences tests: fix Update Manager date loadingGravatar Tomaz Canabrava
Date loading was incorrect, this unittest + fix deals with that. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01Preferences tests: location updates & bug fixGravatar Tomaz Canabrava
Fixed loading the location preferences. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-28Correctly load the language based prefsGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-28Load system LanguageGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-28Fix default file behavior testsGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-28Remember to look for the GroupGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-18Added language testcaseGravatar Tomaz Canabrava
Also, added a missing method / property Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-18Tests for Units PreferencesGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-15Make all current written tests passGravatar Tomaz Canabrava
Fixes a couple of issues with the tests. Also, a type in prefs.h is "short" while it's actually a boolean, this made me write the wrong testcase for this. Fixed this by setting the Qt wrapper to bool, but I didn't changed the c implementation because I tought I could break something. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-15Update a few tests, implement PlannerGravatar Tomaz Canabrava
Also, fixed a typo that caused a bug. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-15Test planner settingsGravatar Tomaz Canabrava
Plus: fix a typo. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-10-11Add preference to change deco modelGravatar Robert C. Helling
Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-25Clean up group handling in SettingsObjectWrapperGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-25Make sure we remember the dive computer vendor and modelGravatar Dirk Hohndel
Preferences work best if you not only write them, but read them again as well. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-24Separate VPM-B conservatism preference for planner and profileGravatar Rick Walsh
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for planning dives and prefs.vpmb_conservatism for profile ceiling display of saved dives. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-24Rename conservatism_level to vpmb_conservatismGravatar Rick Walsh
Make the variable purpose less ambiguous Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-20Preferences: remember both the locale name and the user friendly textGravatar Dirk Hohndel
Currently we are confused which it is we are looking at and so setting the language is broken. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-04Settings fixup: gflow and gfhigh are intGravatar Rick Walsh
With the recent setting cleanup, gradient factors were set to bool, so were saved as 1/1, rather than say 50/80. This commit fixes that. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-28Settings update: Fix git_local_only loadingGravatar Tomaz Canabrava
Thanks to the unittesting. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-28Settings update: Fix cloud_git_urlGravatar Tomaz Canabrava
I was freeing data segment, sigh. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-28Settings update: Fix loading "show pictures" in profile testsGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Fix missing groups and Language initializationGravatar Tomaz Canabrava
There's one function named uiLanguage() that should return the current uiLanguage() that subsurface is running, but it actually sets a whole lot of preferences, I think that the general idea of that function is okay, but it seems broken for me. still, I used it to load the correct language from the preferences since it's what this function is currently doing right now. Also, a lot of missing groups where added. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Only set if value changed + bugfixes.Gravatar Tomaz Canabrava
Only set the settings if it actually changes, when the user clicked on the save button on the preferences, the code would run in every dialog saving each preferences on disk, but this is uneeded if the value didn't changed. Also, while doing that, I found a couple of places where I used the wrong field, which are now fixed. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Fix broken UpdateManger logicGravatar Dirk Hohndel
In commit b76c1846bbfd ("Settings update: Simplify Update Manager") the logic for when to show the UpdateManger question to the user got broken. Unintuitively, a boolean setting actually has three possible values. True, False, and Unset. This patch fixes things to work as designed again. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Remember to load the "UpdateManager" settingsGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Move loadPreferences out of qt-helper.cppGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Move preferences sync / initializationGravatar Tomaz Canabrava
Move Preferences sync / initialization out of the planner widget prerferences to the ObjectWrapper. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Add "Dive Computer" settings to SettingsObjectWrapperGravatar Tomaz Canabrava
For some reason, the dive computer settings weren't in the settings prefs. This moves it, makes the boilerplate on Settings ObjectWrapper and make things compile. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Add UpdateManagerSettings to SettingsObjectWrapperGravatar Tomaz Canabrava
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-27Settings update: Clean up save user id localGravatar Tomaz Canabrava
So, prefs.save_userid_local is being set outside of a preferences set (it's set to true and false while loading the files via xml or git) and because of that I had to bypass a few method calls. When something triggers a preferences change, the application will be notified that the preferences changed, thing that I couldn't do while reading the xml or git because that should be local-only. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-30Send the appropriate signal when gitLocalOnly changesGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-09Add function to calculate gas maximum narcotic depthGravatar Rick Walsh
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-05-21fixup: Don't confuse EAD and ENDGravatar Rick Walsh
The previous patch (Planner: add best mix EAD preference) used the term EAD (equivalent air depth) in variable names and strings, when it should have been END (equivalent narcotic depth). They're not the same thing and shouldn't be confused. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-05-21Planner: add best mix EAD preferenceGravatar Rick Walsh
Add best mix EAD preference and UI, along with a tooltip describing what it does Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2025-01-01 03:03:07 +0000