| Age | Commit message (Collapse) | Author |
|---|
|
Unless run with '-v -v -v'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While in theory the DEVINFO event should give us the correct detected
product, it's also possible that the code that usually detects the
product gave up and returns an unknown model.
Try to have the message reflect that situation more accurately.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The logic in process_imported_dives() was faulty: Dives are merged
trip-wise in a loop. But if only autogenerated trips were supposed
to be merged, the trip would not be added.
Change the logic to always add the trip if it is not merged. To make
the loop easier to read, factor out the merge-trip-into-existing-trips
logic into a separate function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since recent commits, dive-trips are not added directly to the core,
but into separate trip tables (see ec37c71f5eeb7d4b0c4b8719b52583fadb0b8f4c).
These commits did not finish the work for the download-from-dc
case.
Add an extra trip_table field to device_data_t. If trips are created
(user selected "Download into new trip"), the trip will be created
in that table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Commit 4d06ddd72351f7804acdaec81f0400a735581229 removed deletion of
unused dive sites on save. The corresponding variables were not
removed leading to compiler warnings. Remove the variables too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When no real name is set in /etc/passwd the username ends
up being ",,,". Git does not like that. Actually, only the
part before the first comma is the name, the rest is office
and phone number. We don't want those.
Before we only testing for the username being a NULL pointer.
Reported-by: Keith Grimes
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The installment of the divelist-undo system has made it unnecessary
to adopt the uniq-id of the merged-into dive. On the contrary, we
want to avoid two dives with the same dive-id in the divelist at
all costs, since get_divenr() still uses the id and thus may fetch
the wrong dive.
Therefore, don't copy the dive-id on merge.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the future we want to download trips into a distinct trip-table
instead of the global trip-table to allow for undo of import.
Therefore add a trip_table argument to DiveImportedModel::repopulate()
and a trip_table member to DiveImportedModel. To correctly set these,
add a DownloadThread::trips() function, which currently simply returns
the global trip table.
Finally, make "struct trip_table *" a Q_METATYPE, so that the corresponding
arguments can be passed from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In 64e6e435f82801f4f440ef5b1caf58a91a7c9929 the trip->when field
was replaced by a function. This forgot to adapt dump_trip_list(),
which is only compiled if DEBUG_TRIP is defined. Fix the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Generate dive table functions by macros so that they can be reused
for trip tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This function was not used outside of divelist.c, therefore make it
local. Moreover rename it to add_to_divetable so that the name
is generic and can be generated by a macro.
Moreover, remove the special case idx = -1, which would determine
the insertion index. Instead let the single caller who used this
feature do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently autogroup_dives() groups all dives in the global dive
list. Add a table parameter so that dives in any table can be
grouped. Thus it will be possible to pre-group dives on import,
which will be used for undo of import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add filter for dives having a planned dive computer or
a logged dive computer.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
... to reduce code duplication.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Unused dive sites were deleted on save. This clashed with the undo
system in the following scenario:
1) Delete single-use dive site.
2) Save (dive site deleted)
3) Undo (reference to freed dive site)
Therefore, as a quick-fix, keep the referenced dive site around.
Note that this also means that empty dive sites must not be
deleted, as it might refer to a dive in the undo system. Instead
only clear references to empty dive sites in the global dive
table. Factor this functionality out, as it was common to the
XML and git savers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
averagePPO2 appears to be correct value instead of currentPPO2SetPoint.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
The starTimestamp is 4 hours apart on 2 different DCs within the sample
log. DiveDate on the dive_logs table seems to be correct, but must be
converted from human readable format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
Seems that Shearwater cloud stores sample rate into the database and
it is not constant within the log.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
This works to some extent to part of a sample log I received. However,
still quite a bit more work is needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
I encountered this while implementing Shearwater Cloud import, but it
makes sense to increase the size for dive id for Shearwater Desktop as
well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
wcslen() returns the number of characters in a wchar_t string.
In the case of WideCharToMultiByte() an estimate for the size of
the utf8 buffer is needed. Using wcslen() is incorrect for such a buffer,
because for any non-ASCII character the estimate will be off by 1 byte.
Call the following instead to obtain the proper UTF8 buffer size
for the conversation:
WideCharToMultiByte(CP_UTF8, 0, utf16, -1, NULL, 0, NULL, NULL);
Also fix some missing "\n" in fprintf() calls.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
After upgrading to Qt 5.12.0, download over BT from a DC did not work
any more. On the console the message "Connecting to port is not
supported (Uuid required)". Linus noticed earlier that we do rather
strange processing in this part of the code related to selecting port 1
or port 5. This all seems not needed (any more), but broader testing is
advised. This being stripped from the code, the mentioned error from Qt
persisted. That is strange in itself, as we did not reference port
numbers any more.
Step 2 in this commit is actually using an uuid to the call to
connectToService. Choosing an uuid seems relatively straightforward as
we can use the same one we already use for Android. That is the default
BT RFCOMM Serial Port Profile uuid. Interestingly, when changing to this
uuid we run immediately in a Qt runtime error telling us "QDBusPendingReply:
type ManagedObjectList is not registered with QtDBus.". For these 2
unexpected Qt messages, QTBUG-72742 was made. Studying the Qt source
code at this point reveals a possible workaround. Simply create a local
QBluetoothLocalDevice object, which, behind the scenes registers the Qt
internal ManagedObjectList with QtDBus.
In the meantime, Qt agrees that QTBUG-72742 is valid, and that a fix is
to be expected in a future version. At that point in time, the
declaration of the QBluetoothLocalDevice can be deleted again.
In the end, interfacing over BT works again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This is an attempt to fix issue #1896. While this seems a Qt issue in
combination with very specific Android devices, this might be a fix. Do
not check for a very specific state of the local BT controller, but just
check if it is powered on.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
In commit 6bf4120dbbf7be1b9267e0e86f3948b77870ea71 the trip-flags
were replaced by a simple boolean. This made the was_autogen
parameter to the remove_dive_from_trip() and unregister_dive_from_trip()
functions unused. Remove these parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Just like with the Aqualung i770R in 7697003498 this name follows the
pattern of a model number in ASCII encoding, followed by the serial
number of the device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
To make data flow more clear, unglobalize the downloadTable object.
Make it a subobject of DownloadThread. The difficult part was making
this compatible with QML, because somehow the pointer to the
download-table has to be passed to the DiveImportedModel. Desktop would
simply pass it to the constructor. But with objects generated in QML
this is not possible. Instead, pass the table in the repopulate()
function. This seems to make sense, but for this to work, we have to
declare pointer-to-dive-table as a Q_METATYPE. And this only works
if we use a typedef, because MOC removes the "struct" from "struct
dive_table". This leads to compilation errors, because dive_table is
the symbol-name of the global dive table! Sigh.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
DCDeviceData was using that weird pattern where the instance
variable was set in the constructor. There is no apparent
reason to do so, therefore convert to a "normal" singleton.
Access that directly in QMLManager instead of saving it in
a member variable first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The simplified filter-widget doesn't present lists of existing values
with counts. Thus, a whole slew of count_dives_with_*() functions
can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
this was requested in #1854 and I think this suggestion makes sense
Fixes #1854
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
These two functions were called in different contexts:
- unregister_dive(): from the undo-commands to remove the dive
from the global dive table, but not delete it. The dive was
already removed from its trip.
- delete_single_dive(): from non-undo code. Most of it not in
use and removed in a sibling-commit. Here, the dive is supposed
to be removed from its trip and a new selection is calculated.
delete_single_dive() calls unregister_dive(), which removes the
dive from its trip. Move remove_dive_from_trip() from the former
to the latter and make both functions independent. Instead
of deleting the dive explicitly in delete_single_dive(), call
the delete_dive_from_table() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
All callers of add_dive_to_trip() work on freshly generated dives,
with one exception, that was redundant anyway. Therefore it is not
necessary to remove the dive from a potential previous trip. Move the
responsibility of removing the dive from a trip to the caller,
respectively remove the redundant call. Add a warning message in the
case that trip is set.
Background: On import (either download or file-import) we might not
want to add trips to the global trip-list. For example to enable undo
of import but more generally to detangle that data flow. Thus,
add_dive_to_trip() should not mingle with the global trip-list,
which it has to do if a trip is deleted because the old dive was
removed.
Analysis of the add_dive_to_trip() callers:
1) core/dive.c
pick_trip():
called on freshly generated merged dive.
finish_split():
called on two freshly generated split dives.
2) core/divelist.c
create_and_hookup_trip_from_dive():
called on freshly downloaded dive in dive_cb().
called on freshly downloaded dive in record_uemis_dive().
autogroup_dives():
called on dive from get_dives_to_autogroup(), which only
finds dives that are outside of trips.
combine_trips():
unused - removed in sibling commit.
try_to_merge_into():
this call was actually erroneous - dive was already added
to trip in try_to_merge(). Remove call.
3) core/libdivecomputer.c
dive_cb():
called on freshly downloaded dive.
4) core/uemis_downloader.c
record_uemis_dive():
called on freshly downloaded dive.
5) core/load_git.c
create_new_dive():
called on freshly allocated dive.
6) core/parse.c
dive_end():
called on freshly parsed dive.
7) desktop-widgets/command_divelist.cpp
DiveListBase::addDive():
called on dive which is newly added to core.
moveDiveToTrip():
called on dive that was removed from trip a few lines above.
8) mobile-widgets/qmlmanager.cpp
QMLManager::undoDelete():
called on dive where divetrip was reset in the previous line.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In 302f6adb79681da3fe53336f1e4c7525f46fd47d dive-splitting was made
undo-able. To this goal, the dive-splitting functions were split in
two types: Those that operate directly on the divelist and those that
only allocate the dives. The former are not in use anymore, therefore
remove them. Since only the latter remain, remove the "_dont_insert"
appendix of the name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In 014c04f8bd30740e7711f3b3a01619fd27b5b613 merging dives was included
in the undo-system. This made the merge_two_dives() function caller-less.
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In f427226b3b605523bc8285dbdaaa7f6993af6e6a autogrouping / removal
of autogrouping was moved into the undo-machinery. This made the
remove_autogen_trips() function caller-less. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In f427226b3b605523bc8285dbdaaa7f6993af6e6a a combine_trips_create()
function was introduced that combined trips without deleting the old
trips. This was necessary for making combine-trips function undo-able.
The old combine_trips() function is not used anymore. Therefore remove
it. Rename the combine_trips_create() function to combine_trips() as
no differentiation is needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Dirk Hohndel
Berthold Stoeger
Robert C. Helling
Miika Turkia
Lubomir I. Ivanov
Jan Mulder