| Age | Commit message (Collapse) | Author |
|---|
|
Annoyingly, the replacement has only been available since Qt 5.14.
To make the code less messy, implement our own stdToQt conversion helper.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
getDiveSelection() returns a vector of the selected dives.
Use that instead of looping over the dive table and checking
manually.
This removes a few lines of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The UI only allowed adding dives to trips above or below the
current dive (and even that is buggy). This is a strange
restriction, since trips are designed to be non-contiguous.
Allow adding dives to any trip using the new trip selection
dialog. The undo-command is already there, so only little
code to write.
This feature was requested on the mailing list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the dive list we have horrible code, which intercepts all events
to save the selection before/after the event. This was necessary
because we couldn't get Qt's selection data flow under control.
This means intercepting all events that can change the selection.
The page-up, page-down, home and end keys were forgotten. Add these
cases.
Fixes #2957.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Most of these became unnecessary when including media in the
undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There is no reason that this dialog is a singleton. Since it is modal,
it can be created on demand. Apart from removing superfluous global state,
this simplifies code, because preparing the widget can now be done in
the constructor instead of overriding the showEvent() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There is no reason that this dialog is a singleton. Since it is modal,
it can be created on demand. This simplifies code, because the mode
(selected-only or all-dives) can be set in the constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This one is a bit hairy, because two things might happen if the
picture has a geo location:
- A dive gets a newly generated dive site set.
- The dive site of a dive is edited.
Therefore the undo command has to store keep track of that.
Oh my.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If we want to make addition of pictures undoable, then create_picture()
must not add directly to the dive. Instead, return the dive to which the
picture should be added and let the caller perform the addition.
This means that the picture-test has to be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When selecting / deselecting trips, keep the core updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To check wether the tab widgets should show the trip view, they called
the selectedTrips() function. The trip view was shown if that contained
only one trip. However, the selectedTrips() function was very slow,
because it has to query to core models.
Change the function to singleSelectedTrip(), which returns a trip
if there is exactly one trip selected. The function returns early
if there is more than one trip selected. This makes the select-all
case much faster.
There are two cases which are still very slow:
- List mode, because here all top-level items are queried.
- Dive log with many only top-level items.
Ultimately, we will have to cache the trip selection because
querying the model is too slow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old code would call QItemSelectionModel::select() once for every dive.
Instead collect the selection in a QItemSelection and only call
QItemSelectionModel::select() once. This makes selecting multiple dives
significantly faster.
The loop also expanded the trips with selections. This has now to be
done in an extra loop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When determining the selected dive sites to highlight them on the
map, the DiveListView code used the local indices of the selected
dives. However, that was unreasonably slow. Even though a layering
violation, let's access the core data structures directly. In my
tests this improved from 700 ms to 0 ms!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The DiveListView widget has to differentiate between programmatical
und user-initiated selection changes. It did so by using the
DiveListNotifier::inCommand() flag.
However,
1) There is only one point of entry for such selection changes,
viz. the MultiFilterSortModel::selectionChanged() signal
2) This signal is not only emitted in command-context.
Another source is for example dive-map selection changes.
Therefore, move the programmatical-selection-change status down
to the widget and set/reset it in the diveSelectionChanged() slot.
This makes "select all visible dive sites" somewhat faster. Sadly,
not as much as expected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was used by the map to select dives. However, the map now calls
the core function directly, so this can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was erroneous, as it should only be called at the end of
a selection change, not after every single dive. It made selection
of multiple dives extremely slow.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Debugged-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
DiveListView::selectDive() is an overloaded function. The second
version was only called by the first version, so we can fold one
into the other.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No caller was using that parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The undo-machinery makes sure that a current_dive always exists
after an undo command. This part of the code should never be
called.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This appears to be an artifact. Collapsing does not unselect
the current dive, so reselecting it appears pointless.
Also it is unclear why the selection should be restricted to
a single dive after collapsing.
Probably that was originally meant to expand only the trip
with the current dive in it?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If the dive the user clicked on is invalid show an option to
make the dive valid.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Connect command to context menu.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Commit 2cea115ddb7528d9e6dd1bf918ebf5c670b82479 "fixed" the selection
by hooking into mouseRelease events. An unintended consequence was
that scrolling with the cursor keys didn't update the current dive.
Therefore, also hook into the corresponding key-press events.
This is just horrible, but I'm not aware of any possibility to fix
it properly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Fix two issues:
1) When narrowing the selection, we didn't get setSelection()
calls. Only, when the user released the mouse button was
the selection updated. Therefore, hook into the mouse-release-
event and update the UI if the selection changed.
2) We updated the ui in setSelection(). However, this was called
on mouse-move even if the actual selection didn't change.
Therefore, compare selection before and after processing of
the event and only refresh the UI if there are changes.
Clearly, this can only be a quick stopgap solution and we
should find out how to properly hook into the selection change
machinery. Though see commit 4928c4ae0421193bbd371cb0924091a970489611
for the reason why we do things as we do them.
Fixes #2595
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After selecting dives, the selected dive sites are collected.
This was done using the selectionModel()->selection().indexes(),
which is wrong, because it gives one index per row *and* column.
Accordingly, every dive site was added numerous times to the
array of dive sites to be selected. Change this to
selectionModel()->selectedRows(), which gives one entry per row.
Moreover, if multiple dives with the same site were selected,
this site was also added to the array multiple times. Therefore,
check the array before adding sites.
Note that all this should not change the user experience in
any way, it is only a code-hygiene thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Qt5.11 introduced the suggested replacement QFontMetrics::horizontalAdvance().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dive list accesses the filter model, therefore it makes sense
to also get the header data from there, even if they are only
forwarded from the source model.
This makes control flow more logical and will allow us to remove
the global DiveTripModel instance.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The selection changes upon completing the filter are handled by
the core. Don't do this explicitly in the DiveListView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The QList served as backing store for backupExpandedRows()
and restoreExpandedRows(). However, these always came in
pairs in the same scope. There is no reason to store the
expanded rows over a longer time.
Therefore, return the expanded rows from backupExpandedRows()
and take them as argument in restoreExpandedRows(). Morover
replace the QList<int> by the much lighter std::vector<int>.
We certainly don't need copy-on-write, reference-counting and
immutability of iterators in this case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
That hasn't been used since 2013 (9cc04c1ca6).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This defaulted to false and no caller used anything different.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Calls of these functions were removed in the previous commits.
Now, remove the functions themselves.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old code saved, cleared and restored the selection. This
is not necessary anymore, because on model reset the selection,
which is stored in the core, is reset. Remove the unnecessary
selection handling.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The DiveListView caught signals from the DiveTripModel
with the corresponding indexes. However, the DiveListView
is actually connected to the MultiFilterSortModel and
thus has to translate the indexes.
Instead, catch the signals in the MultiFilterSortModel,
transform them and resend. Let the DiveListView get
its signal from the MultiFilterSortModel.
Yes, this makes things less efficient because there is
an extra signal. On the upside, the makes data-flow much
more logical. Selection will have to be fixed anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The goal here is to unify desktop and mobile by moving
selection code from the desktop-only view.
Currently, initialization of the selection still has to be
called from the view after connecting the appropriate signals.
This is due to the weird way in which create completely new
models when resetting them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The DiveListView has a function to select the first dive. Move
this to the core to be able to call it from all parts (not only
desktop) of the code.
Currently, this has a (small?) UI regression: when filtering dives
and no selected dive is visible anymore, the old code would select
the first dive in the list. The new code selects the newest dive,
which might not be the first if some sort-criterion is active.
To revert to the old behavior, it will be necessary to move the
sorting function likewise to the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is more consistent with the rest of the signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When selecting all dives via CTRL-A or manually and the trips
were not expanded, the QSelectionModel sends a single
selectionChanged signal per trip. We are reloading the map
in every call, making this very slow.
I couldn't figure out how to make QSelectionModel behave more
nicely, therefore I chose the nuclear option: Remove the map
reloading from selectionChanged() and hook into all functions
that do selection changes. In these functions, first call the
original code and then do the selection-changed operations.
This will certainly need some tuning.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To test whether an entry is a trip, we passed a pointer to the
trip through a QVariant and tested that for null-ity.
Passing pointers through QVariants has given us myriads of
problems in QML, therefore introduce a bool IS_TRIP_ROLE
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since requiring Qt >= 5.9.1, we can use the pointer-to-member-function
overloads of addAction (introduced in Qt 5.6). This has the advantage
of compile-time checking of the signal/slot parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since changing the highlighting to use the selected dive, dive
sites with no dive were never highlighted in dive site mode.
Obviously, because there was no dive to be selected.
Therefore special-case all dive-site selection code to recognize
when we are in dive site mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Owing to the recent changes, when the selection flag in the
MapLocationModel was not updated correctly when the user
manually selected the dive. Do that before raising the
divesSelected signal in DiveListView::selectionChanged()
because that will cause the MainWindow to repaint the flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Dirk Hohndel
Berthold Stoeger
Robert C. Helling