| Age | Commit message (Collapse) | Author |
|---|
|
Using non-sensical depth and times for segments in the planner may
lead to an unresponsive UI. Therefore limit depth to 1000 m/3300 ft
and time to 100 h. Limiting of depth is done in settingsChanged()
since it has to adapt to the user changig their preferred units.
Fixes #2762.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The SAC factor is only used for minimal gas calculations which
don't make sense in the CCR context.
Additionally, make bailout stop for at least minimum switch
time or problem solving time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
...this gat lost at some point.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The whole point of having X::instance() functions is to solve
the infamous "Static Initialization Order Fiasco": When having
global objects in different translation units, their order
of initialization is undefined. Thus, when these objects access
each other one cannot guarantee the correct order of
initialization. The X::instance() functions generate the objects
on first use.
DivePlannerPointsModel has such an instance() function. However,
for convenience(?) in diveplanner.cpp we find the global variable
static DivePlannerPointsModel* plannerModel =
DivePlannerPointsModel::instance();
Thus, the DivePlannerPointsModel constructor is run before main(),
negating the whole purpose of the instance() function.
Let's remove this line to avoid hard-to-debug startup issues.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
These were forgotten the last time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
connect to set_o2narcotics missed an & but the compiler did not
complain (which it usually does).
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The spinboxes are already connected to diveplannermodel set_ functions, remove
second connect to plannerShared.
Change get functions to use diveplannermodel.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The last SIGNAL/SLOT cannot be converted due to a limitation in the
new connect() syntax, it does not "understand" default parameters.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Replace SIGNAL/SLOT in favor of new connect()
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Replace SIGNAL() with QOverload<double>::of() to allow
new connect syntax.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Convert the last convert() statements, that can be
converted just by changing the syntax.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Replace syntax for connect of QShortcut.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Change connect() to new syntax for QDataTime.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Replace SIGNAL/SLOT with QOverload.
Signed-off-by: jan Iversen <jan@casacondor.com>
|
|
Change connect for QAction::triggered(bool) to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Change connect for QSpinBox::valueChange(int) to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Change connect for QAbstractButton::clickedto new syntax.
Change connect for QDialogButtonBox::accepted/rejected to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
No need to connect ui.display_variations to the
same signal/slot twice.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Change connect for QAbstractButton::toogled to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
correct SLOT was sec_bottomsac(double), which
is not reported as an error.
correct to set_bottomsac(double)
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
correct SLOT was set_min_swich_duration()(int), which
is not reported as an error.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
correct name mistake in connect()
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Adjust connect() to use plannerShared, avoiding parameter convert
problem.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
QSignalMapper gives a warning that it is depreciated, and the
doc. states that using a lambda function is more efficient.
Replace use of QSignalMapper.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
QSignalMapper had a parameter convert problem, when mapping to
set_deco_mode in plannerShared.
Use lambda function in connect to avoid parameter convert problem.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Replace
display_runtime
display_duration
display_transitions
verbatim_plan
display_variations
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use plannerShared setter to update the variables in qPref.
This will also signal the cylindermodel to calculate a new bestmix.
variables:
bottompo2
decopo2
bestmixend
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use plannerShared setter to update o2narcotic. This will also signal
the cylindermodel to calculate a new bestmix.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
variables
bottomsac
decosac
problemsolvingtime
sacfactor
are not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
variables
min_switch_duration
are not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
and are read from plannerShared which includes a conversion
change signals to slots in plannerShared
change read from prefs. to plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
change local doo2breaks to plannerShared and update connect.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
variables
drop_stone_mode,
last_stop,
switch_at_req_stop
are not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
change local setBailout to plannerShared and update connect.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
planner_deco_mode is not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
reserve_gas is not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Remove PlannerSettingsWidget slots, that are directed to plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
Connect the signals for ascent/descent directly to plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
change the settings variables using UNIT_FACTOR to use
plannerShared instead.
There are no changed functionality, it is simply removing calculations
from the UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
|
|
When connecting a model to the TableModel class, it would connect
clicking on an item to the remove() slot of the model.
This breaks the program flow implied by the undo code:
Ui --> Undo-Command --> Model --> UI
Moreover, the naming of the remove() slot is illogical, because
clicks can also have different effects, as for example in the
cylinder-table.
Therefore, move the connect() call from TableModel to the
callers. In the case of TabDiveSite, move the remove() function
from the model to the TabWidget, where it makes more sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
Berthold Stoeger
Robert C. Helling
jan Iversen