| Age | Commit message (Collapse) | Author |
|---|
|
Maintab is one of our most complex classes, and it's
something I'm not actually proud of. But it currently
works and the idea of splitting it was in my head for
quite a while.
This is the third or fourth tentative of splitting it,
and this time I let the most complex part of it untouched,
the Notes and Equipment tab are way too complex to untangle
right now on my limited time.
A new class 'TabBase' should be used for any new tab that
we may create, and added on the MainTab (see the new lines
on the MainTab constructor).
Also, Extra Info, Information, Photos and Statistics where
ported to this new way helping reduce the number of
lines and functions on the MainTab quite a bit.
Overall this is a step in the right direction for the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
|
|
|
|
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This marks the UI as modified and updates the maxdepth of the dive; it
ignores changes to the duration, doesn't modify the profile, so it's
nowhere near ready.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far this is purely informational, you can't edit this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And hide them for now. This doesn't change anything visible, it's just
putting in place the pieces for later use.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The cylinder table was constructed very ealy from the contructor of the
planner, so early that the tr() functions are not registered. This fix
instantiates the cylinderModel from the maintab (as it is done
with, for example, the weightsModel) and lets the planner user
this instantiated (and proper translating) cylinderModel.
Fixes: #206
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This reverts commit 1d8662006cbb5edae941315e30ede381c23a817b.
Mistakenly pushed to master
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When merged with real dives, those would double count otherwise.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This seems to work around the crazy QDateTime::fromTime_t() problem in Qt.
It is *very* lightly tested. In fact, the only test is that "test0.xml"
change that is part of this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit df4e26c8757a ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.
But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.
This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder. Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.
The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This caches the git ID for the dive on load, and avoids building the
dive directory and hashing it on save as long as nothing has invalidated
the git ID cache.
That should make it much faster to write back data to the git
repository, since the dive tree structure and the divecomputer blobs in
particular are the bulk of it (due to all the sample data). It's not
actually the git operations that are all that expensive, it's literally
generating the big blob with all the snprintf() calls for the data.
The git save used to be a fairly expensive with large data sets,
especially noticeable on mobile with much weaker CPU's. This should
speed things up by at least a factor of two.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This hides the start time when viewing trip details.
See #964
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The date comes from the first dive in trip, thus no need to allow
editing (especially since the edited date seems to be discarded in any
case).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As pointed by jwhferguson, I changed "show average depth" to "show
mean depth".
I modified file preferences_graph.ui and changed the text. This bug was
reported on fedora 22. i use ubuntu.layout and justification is nicely
displayed.
The patch also removes a no longer necessary include.
See #922
Signed-off-by: krisalpha <choprakrishan61@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the spirit of "Do the simplest thing that could
possibly work": capture Ctrl+leftclick mouse events
in the Notes area. If the string under the clicked
position is a valid url, then launch it.
Many common URI schemes will work. Typing a url that
starts with https:// will work. So will mailto: and
file://
See #733
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise if the user selects more than one dive, then goes back to just a
single dive, the maximum and minimum duration of the previous selected
group of dives stays visible which is clearly incorrect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Adding modified code to support deletion of selected images as
well as deleting of all images (with warning messagebox)
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Just add a context menu for now - the following commits will make this
useful.
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now we can actually change them in preferences instead of just deriving
them from the language set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The reason for that is, even if profile widget is made with qpainter
and for that reason it should be a desktop widget, it's being used
on the mobile version because of a lack of QML plotting library that
is fast and reliable.
We discovered that it was faster just to encapsulate our Profile in
a QML class and call it directly.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we have now destkop and mobile versions, 'qt-ui' was a very
poor name choice for a folder that contains only destkop-enabled
widgets.
Also, move the graphicsview-common.h/cpp to subsurface-core because
it doesn't depend on qgraphicsview, it merely implements all the
colors that we use throughout Subsurface, and we will use colors on both
desktop and mobile versions
Same thing applies for metrics.h/cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Tomaz Canabrava
Jeremie Guichard
Martin Měřinský
Dirk Hohndel
Jan Mulder
Robert C. Helling
Linus Torvalds
Miika Turkia
krisalpha
K. \"pestophagous\" Heller
Lubomir I. Ivanov
Guido Lerch
Tomaz Canabrava