| Age | Commit message (Collapse) | Author |
|---|
|
In 2e230da3610dd1fc61badaf328a084512895fb90 the dive-selection signals
were unified. Sadly, this was done in a suboptimal way resulting in
numerous calls to updateDiveInfo(), which refreshes the main-tab.
Firstly, the MainWindow connected to selection changes from both,
the undo-command and the divelist. Secondly, every selected dive
in the divelist caused a single signal.
Thus, connect only to the divelist (this is necessary for user-initiated
selection changes) and only send a single signal in the divelist
per selection-reset.
This is still less than perfect as updateDiveInfo() is called even
if the current dive doesn't change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of calling into the planner, simply create the dive computer
information right there, using the existing helper function we have to
create simple profiles.
Fixes #2128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In analogy to the other table functions, generate these by
a macro as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The way the application state would enable/disable widgets was very
"dynamic". A property-list would be generated and put in a set
of arrays. Very hard to figure out what is going on.
Replace these property-list by flags and explicit old-fashioned boolean
expressions.
Join the two arrays (widget- and property-lists) into an array of
a unified data structure.
Replace the macro that sets the widgets by a simple static function.
Factor out the four loops that added widgets to the quadrants into
a simple static function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of looping over the dive table and extract dive sites,
loop over the dive site table.
This makes it possible to show dive sites that have no dive
associated with them.
But we have to create to functions that check whether a dive
site has any shown dives or has any selected dives.
Moreover, change the code to add near dive sites of the same
name if in edit mode. Other wise (erroneously added?) dive
sites with the same name cannot be moved on the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When changing the dive selection, we have to reload the map to show
the correctly highlighted flags. Do this directly by hooking into
the DiveListNotifier::divesChanged signal instead of indirectly
via the MainTab.
Moreover, on reload center on the highlighted dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
|
|
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
- Remove updateInfo() function as it does the same as update().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The only caller of said function used to check whether MainTab is
in edit mode. For this case there is already a function - use that
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Apparently, in some Qt-versions the destructor of the base class
calls hide on child-objects (according to Qt's object hierarchy).
This is obviously called after the derived class has been destructed.
In a concrete case, the base class of the destructed MainWindow
would hide the TabDiveSite object. That would reset the filtering
if a dive site was selected, which would indirectly access the
MainWindow, which is already partially destroyed.
Therefore, destroy the MainTab before destroying the MainWindow.
Do this by keeping it as a std::unique_ptr subobject. Thus, it
will be destroyed before the MainWindow and remove itself from
Qt's object hierarchy.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The model was not reset on file close, leading to weird effects.
New dive sites would be added at the end of a table full of empty
entries.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The editing of a dive field is only performed when focus
is removed from the field. On pressing CTRL-s, the changes
in the currently active field were therefore not saved.
Remove the focus from all fields to trigger an edit command
yand thus ensure that all changes are saved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The whole edit logic moved from displayed_dive to current_dive
and it became more and more tedious to keep these in sync.
Therefore, simply always display current_dive. The only exceptions
are the equipment tab and the planner, as these are not yet
integrated in the undo system. Once this is done, displayed_dive
can be removed.
Moreover, remove the clear parameter from updateDiveInfo().
Instead simply clear of there is no current_dive set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of letting the user edit the fields before adding a dive,
simply add an empty dive. Thus, the ADD mode of the main tab can
be removed.
Constructing a new dive with default-depth and making sure that
the dive is displayed correctly is very subtle. This all needs
to be detangled in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Remove a few cases of
void fun() {
...
}
While touching these functions, fix a few other whitespace
coding style violations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
These functions are now performed by the edit commands and the
macros have no users. Remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The edit dive site button was connected to a *signal* of MainWindow,
which was connected to a slot of MainWindow. Remove the unnecessary
intermediate signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add an edit column that calls the new editDiveSite() function
of MainWindow. The calling code is in DiveSiteSortedModel.
Quite illogical, but that's how TableView works, for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The signal was caught by the MainWindow to:
1) call setDefaultState()
2) call refreshDisplay()
3) call refreshDisplayedDiveSite()
1) Let's call that directly from the widget. The reason is that in
the future there might be multiple way to get into the widget and
therefore the widget needs finer control.
2) Remove this call as it produces an unsteady UI.
3) This should be done by undo commands, not only when finishing
dive site editing.
Thus, the signal becomes unnecessary and can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using the filter widget itself to show the information how many
dives are displayed, put it in the window title where it's visible even if the
filter widget isn't shown.
If the filter is not active, simply show the total number of dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can filter both in the default layout and in the dive list layout.
Fixes #1951
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply because it bugged me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The info box can get longish. Offer the user to turn
off display of deco information (surface GF and
individual ceilings).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Remove from:
- unit tests
- desktop widgets
- preferences
- core intergration
- cmakefiles
- build scripts
- icons
- docs
Also remove the plugins and social network integration.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Last caller was removed in e0f473fcb49c8121a0a9c52bf0536049b0f342ed
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In commit b0556abdd35f96b816ba11e40bf5707abe0c3ebf, the filter-widget
and the filter were connected by a direct function call. This led
to a rather obscure crash on application-close with Qt 5.12. The
crash is due to the Ui::MainWindow class being a sub-object of MainWindow,
but the FilterWidget2 being *not* a subobject.
What happens is that after calling the MainWindow destructor, the
subobjects are destructed, notably the Ui class. Then the base-class
destructor is called (which makes sense, as destructors are called
in reverse order of constructors).
But: the QObject destructor calls hide() on all still existing child-objects
according to Qt's object hierarchy, notably the visible FilterWidget2.
Now the FilterWidget2, on hiding, updates the MainWindow, which has already
destructed all its subobjects. Crash.
Prevent this crash by making FilterWidget2 a subobject of MainWindow
and thus have it destructed before running the QObject destructor.
Alternative ways would be:
1) Use signal/slot() instead of function calls, as these are automatically
removed if an object is destroyed.
2) Make the FilterWidget2 subobject a smart-pointer. Thus, we probably
wouldn't have to include the corresponding header.
3) Make the FilterWidget2 subobject a plain pointer and delete it
explicitly in the constructor.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
On desktop, replace all add_imported_dives() calls by a new undo-command.
This was rather straight forward, as all the preparation work was done
in previous commits.
By using an undo-command, a full UI-reset can be avoided, making the UI
react smoother.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
... to reduce code duplication.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
The DiveTripModel was used to represent both, trip and list views.
Thus many functions had conditionals checking for the current mode
and both modes had to be represented by the same data structure.
Instead, split the model in two and derive them from a base class,
which implements common functions and defines an interface.
The model can be switched by a call to resetModel(), which invalidates
any pointer obtained by instance(). This is quite surprising
behavior. To handle it, straighten out the control flow:
DiveListView --> MultiFilterSortModel --> DiveTripModelBase
Before, DiveListView accessed DiveTripModelBase directly.
A goal of this commit is to enable usage of the same model by mobile
and desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Drop tons of now-unused-code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Wires the code to display the filter widget on the mainwindow.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Register the new FilterDive widget on the mainwindow
so we can trigger a shortcut to display it.
The shortcut currently doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The whole point of the undo-command system is that the divelist
doesn't have to be refreshed. Therefore, don't do it for autogrouping
/ deautogrouping.
Moreover, the divelist-changed flag is also set by the command and
doesn't have to be set explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Berthold Stoeger
Dirk Hohndel
Doug Junkins
Robert C. Helling
Lubomir I. Ivanov
Tomaz Canabrava