| Age | Commit message (Collapse) | Author |
|---|
|
Currently, dive site names are only updated on full reload.
Instead hook directly into the corresponding signal in the
MapLocationModel to set the name. Also to the coordinates
directly there instead of going via the MapWidgetHelper.
In the MapWidgetHelper, just center on the changed dive site.
Hook into the signal directly there and remove the slot
from the MapWidget. This makes the whole call-chain at least
one call shorter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since the dive-site-filter is active either on the dive-site-edit
page or the dive-site-list page, use that as the flag for dive-site-edit
mode. Moreover, when the filter is reset, the
MapWidgetHelper::reloadMapLocations() function is called, so we
can use that place to enter/exit edit mode.
This makes it easier to keep everything consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was only used locally and only a stub for calling
MapWidgetHelper::centerOnSelectedDiveSite. Call the latter directly
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When changing the dive selection, we have to reload the map to show
the correctly highlighted flags. Do this directly by hooking into
the DiveListNotifier::divesChanged signal instead of indirectly
via the MainTab.
Moreover, on reload center on the highlighted dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This member variable was only used locally in functions.
Accordingly, make it a function-local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since no dive site field editing enters edit mode anymore,
the whole edit mode state and code can be removed from the
widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Simply hook into the appropriate signal. Thus, the "update dive site
location" button can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There are two updateDiveSiteCoordinates() member-functions, viz.
in MapWidget and MapWidgetHelper. Adapt them to take a pointer
to dive_site instead of a UUID. This is part of an effort to
replace UUIDs by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the uuid argument to MapWidgetHelper::enterEditMode() by a
pointer. Likewise, adapt the only caller prepareForGetDiveCoordinates().
This is a small step in a bigger effort to replace dive-site UUIDs
by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of reading out the global object "displayed_dive_site",
pass the dive site to be edited in arguments to
prepareForGetDiveCoordinates() and enter edit mode.
Simplify the code in LocationInformationWidget by not using
signals to call the prepareForGetDiveCoordinates() function.
While doing this, collect common code in accept() and reject()
in the already existing resetState() function.
This is another entry in a series of commits that makes
data-flow more clear by removing access to the global
"displayed_dive_site" object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The setEditMode(bool) function behaves very differently, when
entering and exiting edit mode. Therefore, split it in two
versions. This will allow to pass arguments that make sense
only when entering the edit mode.
Since setEditMode() doesn't exist anymore, turn the editMode
Q_PROPERTY line to the MEMBER version. Accordingly, remove
the reader function. If QML wants to enter edit mode, it
should invoke the appropriate function and not simply set
the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The coordinates of a "dragged flag" were passed out-of-bound via
the global "displayed_dive_site" object and then a signal was sent
to notify of the changed coordinates.
Instead, pass the coordinates directly via the signal. This makes
the data- and control-flow more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was used by LocationInformationWidget to instruct the map
that the coordinates of the current dive site has changed.
There is no reason why this couldn't be a function call, as no
other object ever connect()s to this signal. In fact, such a
function already exists viz. updateLocationOnMap.
Therefore, replace the signal by a simple function call.
Moreover, the uuid and coordinates of the dive site were transported
via the global "displayed_dive_site" object. Instead, pass this
information in the parameters of the function. This makes it
easier to reason about data- and control-flow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The dive site list was connected to centerOnDiveSite(). Apparently,
the currently selected dive site should have been shown in the map.
Yet, this never worked, because the actual dive site of the selected
dive had precedence in centerOnDiveSite().
It seems that centerOnDiveSite() had actually to purposes:
1) center on the passed in dive site
2) center on the dive sites of the selected dives
Therefore, split this function in two separate functions for
each of these use-cases. This allows us to remove some pre-processor
magic (mobile vs. desktop) and to remove a parameter from the
MainTab::diveSiteChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This patch allows updating the location of map markers
while editing a dive site and updating the text in the
LocationInformationWidget in real-time.
Currently it is only possible to see the marker changes by
clicking 'Apply'.
The modification required the following changes:
- add the MapWidget::updateCurrentDiveSiteCoordinatesToMap() slot
and call it each time the GPS text updates
- separate the updateCurrentDiveSiteCoordinates(FromMap/ToMap) logic
by having the FromMap/ToMap suffix to method names
- make MapWidgetHelper::updateCurrentDiveSiteCoordinatesToMap()
call a new MapLocationModel::updateMapLocationCoordinates()
method, which updates selected location coordinates and the model
- add MapLocation::setCoordinateNoEmit() that does not emit
a signal when updating a coordinate
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I thought we had this automated, but Lubomirs commits introduced a few
files with dos line endings. This is purely a change of line endings, no
other changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- remove ";"s
- remove {} where not needed or move them to the same line
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The local slot coordinatesChangedLocal() tracks the MapWidgetHelper
coordinatesChanged() signal and emit a coordinatesChanged() signal
to any listeners (e.g. MainWindow).
Also add a small change in centerOnDiveSite(), to not be called if
we are skipping the reload (skipReload is updated by
selectedDivesChanged()).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The selectedDivesChanged() signal from MapWidgetHelper is connected
to a local slot. One problem here is that this crashes with the calls to
DiveListView().
The dive list widget triggers events that call reload() on the MapWidget
(same happens for Marble's Globe class) and that crashes somewhere in
the QML shared library. TODO: investigate.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Use findChild() to obtain the only MapWidgetHelper object created
in the MapWidget.qml. Store the reference as a member variable -
m_mapHelper.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
By including <QQuickWidget>, <winbase.h> is included from <windows.h>.
<winabase.h> has the IGNORE macro defined.
Undefine it localy in mapwidget.h to prevent a conflict with maintah.h's
EditMode::IGNORE enum.
NOTE: possibly similar case to the undefine in
btdeviceselectiondialog.h:22.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The header should be included only in the .cpp file
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Port from GlobeGPS.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Port from GlobeGPS.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Another placeholder for the Marble port.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Again for the port from Marble, later can be removed / renamed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Later this has to be replaced / renamed if needed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Call same method in MainWindow if the NO_MARBLE macro is defined.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This is WIP and would be developed futher, so that the new
map widget can center on a divesite location.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The files are WIP and located in desktop-widgets, as these
would only be used by the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
Berthold Stoeger
Linus Torvalds
Lubomir I. Ivanov
Dirk Hohndel