| Age | Commit message (Collapse) | Author |
|---|
|
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If an attempt to contact the cloud storage fails, Subsurface switches into
offline mode. This allows us to go back online again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let's have the preferences window as small as possible with the current
data in it. This should allow people with vertical resolution of 600 to
use the preferences window.
Fixes #1083
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Not sure if "local cache" is the best text, but it's accurate.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fix is reasonably straightforward when the divedatapoint structure stores
the cylinder rather than gasmix.
Fixes #970
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise we pretend the dive is now.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Reported-and-tested-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The previous patch (Planner: add best mix EAD preference) used the term EAD
(equivalent air depth) in variable names and strings, when it should have been
END (equivalent narcotic depth).
They're not the same thing and shouldn't be confused.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add best mix EAD preference and UI, along with a tooltip describing what it
does
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This parses .txt log files produced by Dataplus and Oceanlog software.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will parse the date and time information on CSV import if the file
name matches the one used by APD log viewer (date and time are available
in the file name). Hard coding the year to 20?? is a bit unfortunate,
but as there is only 2 digits in the year, we have to invent something.
And it would be quite optimistic to assume this will bite us back any
time soon :D
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems to work around the crazy QDateTime::fromTime_t() problem in Qt.
It is *very* lightly tested. In fact, the only test is that "test0.xml"
change that is part of this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This sets the basic properties properly but is still missing the parsing
of meta-data, especially used units.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The original negative lookahead failed in case the file name contains
more than 1 dot as it looks for dot that is not followed by the given
extensions. And such a match exists in the file name. The new version
should look properly if the file ends with any of the given extensions.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Seabear import fixed up the NDL and TTS in the samples from minutes
(in the import) to seconds (our internal format for all time). But it
did it with a loop that overran the end of the samples array by one:
for(int s_nr = 0 ; s_nr <= dive->dc.samples ; s_nr++) {
Fix it to use the proper "<" instead of "<=".
Reported-by: Stuart Vernon <stuartv@force2.net>
Tested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This updates the got progress indicator to the changed interface where we don't
pass in an explicit percentage.
It also finally fixes an old problem: If we don't allow the Qt main loop to
process the events, we'll never see a decent progress indicator...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A few more fixes for things that broke in commit 7be962bfc287 ("Move
subsurface-core to core and qt-mobile to mobile-widgets").
[Dirk Hohndel: slightly edited and overlap with Linus' patch removed]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As expected, commit 7be962bfc287 ("Move subsurface-core to core and qt-mobile
to mobile-widgets") caused some breakage.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit df4e26c8757a ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.
But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.
This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder. Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.
The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This caches the git ID for the dive on load, and avoids building the
dive directory and hashing it on save as long as nothing has invalidated
the git ID cache.
That should make it much faster to write back data to the git
repository, since the dive tree structure and the divecomputer blobs in
particular are the bulk of it (due to all the sample data). It's not
actually the git operations that are all that expensive, it's literally
generating the big blob with all the snprintf() calls for the data.
The git save used to be a fairly expensive with large data sets,
especially noticeable on mobile with much weaker CPU's. This should
speed things up by at least a factor of two.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can include additional text. This will be used in later
patches.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
small typo fix for GUI
Signed-off-by: Werner Macho <werner.macho@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
otherwise the max interferes with the value. Furthermore this increases
the max values a bit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This avoids a race condition where we get confused about our internal
state.
Fixes #1031
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the planner, for recreational mode, there is a setting indicating
the pressure at which the diver should be back at the surface. This
pressure was hardcoded to bar.
Fixes #1027
[Dirk Hohndel: small modifications, more reasonable step for psi,
more reasonable maxima]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The unit for the depth parameters ain't meters, its 0.1 meters. This
caused the values stored to be out of range.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is still a left over from the damage done when creating the
preferences objectification.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
Dirk Hohndel
Miika Turkia
Rick Walsh
Linus Torvalds
Tomaz Canabrava
Werner Macho
Anton Lundin