| Age | Commit message (Collapse) | Author |
|---|
|
Don't change into a directory just to see if it exists.
Remove unnecessary braces of one of the changed if statements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This fixes an actual bug, where the current image dir would only be
remembered on closing the program.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The progressbar was not hidden on failed save to cloud. In return
remove an unnecessary variable on loading from cloud.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Calculating variations when in recreational mode doesn't make sense, and can
prevent variations from being calculated when switching back to Buhlmann or
VPM-B modes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
|
|
This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Small change to allow the dive pictures list to use the available
space if one resizes the window or switches to different mainwindow
view.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Decrease the size of the pixmaps during drag&drop to the final
unzoomed size in the profile widget.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Some improvements for the dive picture tab and dive pictures in profile:
- Bugfix mouse event in profile: Only Left-click will open picture
- Bugfix mouse events in picture tab:
- Re-enable context menu (Windows bug mainly)
- Re-enable multi select in a nice way
- Only double-left-click will open picture
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
Icon paths are defined in one place only - application's embedded resources.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
Divelist only view was broken.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Disable tabs for equipment, info, pictures and extra info if a
dive trip is selected.
Remember specific tab selection for dives and dive trip to recover
selection when browsing dive list.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Old code was not functional.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Currently, the path to the recently used file is stored in the tooltip
of the corresponding recent file action. Instead, store the number
of the recent file in the action. This allows for more flexibility
concerning formating of the tooltips (think git repositories, etc.).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using four recent files actions defined in mainwindow.ui,
generate these actions dynamically depending on the macro NUM_RECENT_FILES.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The file mainwindow.cpp is only compiled for desktop versions, so the
condition is redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of handing the QSession object down, simply create it in
MainWindow::checkSurvey()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old code used to be unnecessarily complex: the recent files list
was extended for each file and shrunk if a load failed.
By adding a file to the recent file list only if the load succeeded, a
whole method could be removed.
Other changes: keep track of the recent files using a QStringList and
clearly separate the actions:
- Read recent files from settings [loadRecentFiles()]
- Write recent files to settings [updateRecentFiles()]
- Update the recent files actions in the menu [updateRecentFilesMenu()]
- Add a file to the list of recent files [addRecentFile()]
With this reorganization the code hopefully became more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This reverts commit b0d98f6e269be9560de1b9c140855c85fecf1dd1.
|
|
This reverts commit 92e9c6606f6ef3ad16d2e31f9f9a8f5fa14f2c1a.
|
|
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
Icon paths are defined in one place only - application's embedded resources.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
After one selected a dive and then selects NO dive don't touch
the visibility of UI fields for depth and duration.
So if previously selected dive was a manually added dive, keep them
visible. If it was no manually added dive keep them invisible.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Remove duplicate and incorrect setPlainText call via macro for dive notes.
Deal correctly with ASCII line breaks "\n" in dive notes with html
markup (replace them with <br>).
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
Currently when the user is typing new coordinates the
marker on the map changes location right away. Disable that and
add a 'flag' button that should be pressed instead. Also make the
coordinates update when pressing Enter or when the text
field loses focus.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
After editing the cylinder table (e.g. deleting a cylinder) and
accepting the changes copy the whole dc samples for the dive edited.
This is important because the sensor idx in the samples may have changed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
reset_cylinder may transform unused cylinders into zombie cylinders
inside the planner because it adds a depth info and therefore the
planner will use them.
By calling CylindersModel->updateDive these cylinders will become visible
and can be deleted by the user.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
If the user implicitly adds a dive site by editing a dive, and
a location filter is active, check the new dive site in the
location filter.
This is done by informing the LocationFilterModel of the new
dive site name prior to repopulation. The LocationFilterModel
then adds a corresponding entry and marks it as checked.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since commit 01d961086c1d175732c597dc9acdba7cc4cd2d26, the location filter
list is updated if a dive site is edited. The problem is that if the
name of a selected dive site is changed, the selection is lost.
Therefore, before repopulating, inform the location filter that a dive
site changed its name. The location filter then internally changes the
name and can properly transfer the old selection on repopulate. This is
performed via the new LocationInformationWidget::nameChanged signal,
which is connected to the new LocationFilterModel::changeName slot.
A special case to be handled is the following:
[ ] Site 1
[x] Site 2
and "Site 2" being renamed to "Site 1", i.e. both sites being merged.
Here, the merging is detected and "Site 1" will likewise be checked:
[x] Site 1
[x] Site 1
No merging is performed, as the list will be repopulated anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since commit 01d961086c1d175732c597dc9acdba7cc4cd2d26, MainWindow::refreshDisplay()
is called in the refreshDiveInfo() signal of maintab after editing a
dive site. Since this was the only use of the refreshDiveInfo signal,
remove this signal and instead connect to MainWindow::refreshDisplay directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
set_userid() was declared in core/dive.h and dektop_widgets/subsurfacewebservices.h.
Remove the second instance because two declarations of the same function
are a recipe for disaster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Until now when selecting a dive w/o dive site after having a previous
dive with dive site and location tags displayed, the location tags of the
previously selected dive where still displayed.
This fixes this behavior.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Calls MainWindow::refreshDisplay() if a dive site was edited so that
the filter lists are updated. The old call to updateDiveInfo() was
removed because it is call implicitly in MainWindow::refreshDisplay()
anyway.
Fixes #675.
Requested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Don't accidentally enable o2breaks option when entering planner in
RECREATIONAL mode.
Disable also label for min_switch_duration according to dive mode.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
|
|
Update the filters if the list of dives is updated by calling
MultiFilterSortModel::instance()->myInvalidate();
This had the side effect of clearing all selections. Thus, in
the repopulate() methods of the FilterModels, check those
entries that were checked previously. Since all the filter
models use the same code, introduce a base class FilterModelBase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Each preferences object owns its string members. In three cases, pointers
were copied instead of strings, leading to (in the best case) dangling
pointers if the user edited values:
1) In the GET_TXT macro in core/prefs-macros.h
2) In the PreferencesDialog::defaultsRequested() method
3) In main() of the mobile version
This patch fixes these issues, by using copy_string() or copy_prefs()
as appropriate.
The only reason that the old code didn't crash regularly is that the
default_prefs object was only used at startup and defaultsRequested()
is (at the moment?) dead code.
This patch also aligns the backslashes in core/pref.h and fixes a typo.
The declaration of copy_prefs() is moved to the core/prefs.h header.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This update includes:
- Instead of copyPath() use a new specialized function:
copy_bundled_templates()
- The new function supports overwriting of templates
in the user path, but only if a template file is read-only
- If the file is RW create a backup of the file in the
form of: <file-name>-User.html
- Collect backup files and store them in a QStringList
which is then shown in a QMessageBox from MainWindow
to notifying the user about the backup
This change allows moving the maintenance of the bundled
templates back to the application developers and contributors
as currently the only one who can edit the templates in the user
path was the user.
Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The function find_all_templates() thus far handled
all files in the user template directory.
This patch makes it so that only files with the .html
extension are loaded.
Also remove brackets for single lined `if` statement.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Prefix the path for 'statistics' templates when
detecting if a template is read-only.
Import / Export for statistic templates is not supported.
So the user has to manually copy and chown a '/statistics'
templates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Show an error message if trying to:
1) Import over an existing read-only template with the same name
2) Export to a read-only file with the same name
3) Delete a read-only template
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Thus far the exported template did not had the .html
extension. This patch makes sure that the extension
is always added to the file if missing.
Also handle the case where the user used ".htm" and
replace that with ".html".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Store the last template file name which the user
imported / exported and then try to pre-select
it in the combo box.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
1) on_deleteButton_clicked() show a proper message box with
icon title and also quote the file name.
2) When exporting a file, make sure that the destination is not
read-only even if the source is.
3) Do not allow editing of read-only templates (e.g. the bundled ones).
Instruct the user to Export first.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
Berthold Stoeger
Rick Walsh
Robert C. Helling
Dirk Hohndel
Stefan Fuchs
Martin Měřinský
Lubomir I. Ivanov