| Age | Commit message (Collapse) | Author |
|---|
|
There was this ugly pattern of passing pointers-to-dive_site via
a QVariant of void * type. This is of course inherently unsafe.
Pass these pointers using their proper types instead. This makes
it necessary to register them in Qt's meta-type system. Doing so,
fixes a bug: QML couldn't call into updateDiveSiteCoordinates()
because it didn't know the type and thus the coordinates of
the moved flag were not reflected in the divesite-dialog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is another case of a weird pattern where an object would
connect it's own signal to the slot of a different object.
There seems to be no reason why the former couldn't simply
call the latter.
Remove the [start|stop]FilterDiveSite signals of LocationInformationWidget
and call the corresponding functions of MultiFilterSortModel directly.
While doing so, replace the UUID argument by a pointer-to-divesite.
It will be converted anyway right at the beginning of the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There are two updateDiveSiteCoordinates() member-functions, viz.
in MapWidget and MapWidgetHelper. Adapt them to take a pointer
to dive_site instead of a UUID. This is part of an effort to
replace UUIDs by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the uuid argument to MapWidgetHelper::enterEditMode() by a
pointer. Likewise, adapt the only caller prepareForGetDiveCoordinates().
This is a small step in a bigger effort to replace dive-site UUIDs
by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace UUIDs from LocationInformationModel and fix the fallout.
Notably, replace the UUID "column" by a DIVESITE "column".
Getting pointers through Qt's QVariant is horrible, we'll have
to think about a better solution.
RECENTLY_ADDED_DIVESITE now defines to a special pointer to
struct dive_site (defined as ~0).
This fixes an interesting logic bug:
The old code checked the uuid of the LocationInformationModel (currUuid)
for the value "1", which corresponded to RECENTLY_ADDED_DIVESITE.
If equal, currType would be set to NEW_DIVE_SITE. Later, _currType_
was compared against _RECENTLY_ADDED_DIVESITE_. This would only work
because NEW_DIVE_SITE and RECENTLY_ADDED_DIVESITE both were defined
as 1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The diveSiteSelected signal of DiveLocationLineEdit had the dive-site
UUID as argument. But the receiving slot would not use that argument.
Remove this as a tiny step to remove the UUIDs alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Access to dive-sites in the LocationInformationModel was via UUID.
Replace this by a direct access to the struct dive_site pointer.
Accordingly, rename the UUID_ROLE to DIVESITE_ROLE.
This is a small step in replacing dive-site UUIDs by pointers
throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing uuids, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Remove three cases of rememberSelection() which did not possess
the corresponding restoreSelection() twins.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The selection was remembered/restored anytime the sort-order
changed. Yet, this is only necessary if the view (tree, list)
changes. Therefore, handle the selection only if this is the
case.
This automatically fixes the problem of the trip-selection
not being remembered if the view doesn't change. If the view
does change, trip selection is lost. But since the list view
doesn't have trips to start with, losing trip-selection seems
like an understandable behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On desktop, show the a sort indicator to give a visual feedback on changes
of the sort order. This is trivially done by calling the
setSortIndicatorShown() function in DiveListView's constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On desktop, clicking on a column header sorts the dive-list. This
has the interesting property that every click reverses the sort
order (unless changing from list to tree-mode). The much more
common idiom seems to be to define a default sort order for each
column and switch to that when changing sort-column. Switch order
after clicking the same column again.
Implement this more common behavior. For now, sort # and date
in descending, all other columns in ascending order.
While doing this, use the proper enum (NR) for setting the default
sort-column instead of its integer representation (0).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The last use of the LocationInformation::startEditDiveSite()
signal was removed in ff26ffe0d078a891cbc52afa7ffb59943644ad82.
Remove its declaration.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In commit 9829e49815de1b81b5c9848b71eaa810faab2bcf the dive
selection code was moved from the filter to the dive list.
As a consequence of that change, the selectionChanged signal
was not emitted anymore and therefore the map widget was not
informed of the new dive site list. This had funky effects on
the dive-site editing. Notably, changing the location would
move the map, but not update the flag.
Explicitly emit selectionChanged in filterFinished() to fix
dive site editing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In case of big log files, where MAX_TANK_INFO is reached, tank_info[i] != NULL should be checked after i<MAX_TANK_INFO
Signed-off-by: Simeon Geiger <simeon.geiger@gmail.com>
|
|
This will display the dive site coordinates after the Location label if
there are no associated tags from reverse geolookup. Thus it'll be
clearer for users that we do have GPS location stored for the dive, and
might be able to see more easily if the recorded coordinates are
correct.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
There was still code in MainTab::updateDiveSite() related to
dive-sites obtained from the obsolete web-service. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In DiveListView, the result of model() was dynamically cast to
QSortFilterProxyModel. But then, only the virtual match() function
was used. The whole point of virtual functions is that you can
cast them on the base-class and it will execute the function of
the derived class. Thus, remove these casts and operate directly
on the QAbstractItemModel base class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After invalidating the filter, the dive-selection was modified to
ensure that at least one dive is selected. This was done in the
filter code, but it seems preferrable to do this in the dive-list
code, which has direct access to the selection-model.
Therefore, move the code from MultiFilterSortModel to DiveListView.
While doing so, split the code in DiveListView into more functions to:
1) Get the index of the first dive (if any).
2) Select the first dive (if any).
This allows a distinct size reduction of conditional compilation
in MultiFilterSortModel (accesses to MainWindow are not possible
in mobile code).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
And fix another bug in this area of the code. It appeared that
the gflow/gfhigh and conservatism deco parameters where not
enabled at startup, but after toggling the VPM vs BUEHLMANN setting
they were.
So, fix this as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
The deco parameters need special treatment to wire them up to the
underlying deco model code. And with the new preferences setup this
is a lot of boilerplate.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
On dive-download old dives are deselected and a new one is selected.
If no dives were downloaded, accordingly no dives were selected.
This deselect only dives if at least one dive was downloaded.
Fixes #1793
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was used to track whether we had selected the native BT mode in the
download dialog. But the information is redundant as we can tell from the
device name whether this is a BT/BLE download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Does not solve any problem, but might help users that are confused
about the next/prev DC menu items, to select a different profile
for the currently selected dive. So, enable these menu items only
for dives where more than one DC is used.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Comits f427226b3b and 43c3885249f of the undo series introduced 2 calls
of autogroup_dives() without checking the autogroup global boolean.
This is a bug. An import from DC (for example) then triggers an
autogrouping, the divelist is autogrouped, and the UI button
is off.
This commit solves this. I've chosen for a guard in the autogroup_dives()
that now is a no-op when called when the user did not select autogrouping.
In additon, simplified the other calls to this function, as we do
not need to check before calling any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Instead of the weirdly named "information" and the inconsistent
"dive_list" use the logical "mainTab" and the camel-cased
"diveList", respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The keeps track of different sub widgets needed by other parts
of the code, notably:
MainTab
PlannerDetails
PlannerSettingsWidget
ProfileWidget2
DivePlannerWidget
DiveListView
Access to these widgets was provided with accessor functions.
Now these functions were very weird: instead of simply returning
pointers that were stored in the class, they accessed a data
structure which describes the different application states.
But this data structure was "duck-typed", so there was an
implicit agreement at which position the pointers to the
widgets were put inside. The widgets were then down-cast by
the accessor functions. This might make sense if the individual
widgets could for some reason be replaced by other widgets
[dynamic plugins?], but even then it would be strange, as one
would expect to get a pointer to some base class.
Therefore, directly store the properly typed pointers to the
widgets and simply remove the accessor functions. Why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the dive-site-edit widget, a copy of the current dive site was
used to store the old (pre-edit) data. This is not necessary, since
we can simply access the data in the original dive site. Thus,
replace the subobject by a simple pointer.
This is part of a series to replace dive-site uuids by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The displayed_dive_site object is used in the dive-site-edit widget
to store the old (before-edit) data. But it was also used to store
the GPS data when changed on the map or the input box. Very confusing.
Instead, use the text field as only authoritative source of the
GPS data.
This introduces a small behavioral change: when changing the text
of the GPS text field, update the list of dive sites at the same
position.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The dive-site-edit widget uses a copy of the to-be-edited site
to compare with old values. Generally, this seems overkill
(the original dive-site can be used for such a comparison).
But one place where it can't simply be removed is the taxonomy,
because the widget needs a place to store the unsaved data.
Change the code to use an explicit taxonomy structure instead
of the one provided in the copy. This should ultimately allow
removal of the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The global object displayed_dive_site is used a a backing-store
by the dive-site-edit widget. All external accesses were removed,
therefore make the object local to the widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The global object "displayed_dive_site" is used to store the
old dive site data for the edit-dive-site widget. The fields
of the widget were initialized from this object in the show
event. Therefore the object was updated in numerous parts of
the code to make sure that it was up-to-date. Instead, move
the initialization of the object to the function that also
initiatlizes the fields. Call this function explicitly before
showing the widget.
This makes the data-fow distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Remove a comment which is outdated in two ways:
1) The global variable "displayed_dive_site" was not used at all.
2) The location box cannot be used to rename dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
MainTab::refreshDisplayedDiveSite() was used after dive-site edit
to update the information of the location entry box. This should
always display the dive-site of the currently shown/edited dive,
therefore it makes no sense to use the displayed_dive_site here.
Simply use the dive site of displayed_dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old code had a special case for dive-editing mode:
The dive site uuid of displayed_dive_site instead of displayed_dive
was used.
This makes no sense, because displayed_dive_site is only used by
the dive-site-edit widget, which firstly cannot be activated
during dive-edit and secondly doesn't change the dive site id
anyway.
Thus, use the dive site of the currently edited/displayed dive
in all cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When tabbing through the dive-info screen, a dive-master and a
dive-buddy would be added. The reason is that pressing tab would
be interpreted as a text-input. Disable this behavior by calling
setTabChangesFocus(true) in the TagWidget constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If we update the device with a shortcut button, this is the reliable way to get
the information we need.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Previously nothing was shown while we were trying to connect; now we show a busy
indication in the progress bar and ensure that the 'waiting to connect' text is
displayed. The progress bar switches back to showing actual progress once we have
connected and are downloading data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way the scan time will be shorter (which on macOS can be 25+ seconds).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The last caller was removed way back in 266e754d08499a4ed45024d4886c4e799e7951e7.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Separated from the previous commit as I do not like big whitespace
changes in a small functional commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
While trying to understand more of the big change from PR 1528,
I found that the divelist was marked changed while it was not
changed at all. Reason is simple. The MODIFY_DIVES code assumes
its called only for truly changed data. But in case of saving
tagged strings, it was not.
This fixes this. And I do not believe this has any visual effects.
Further, the now broken indentation is fixed seperately.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
Berthold Stoeger
Simeon
Miika Turkia
Linus Torvalds
Jan Mulder
Dirk Hohndel