| Age | Commit message (Collapse) | Author |
|---|
|
In MainTab::acceptChanges there was a "editMode != ADD" condition
inside a else block to "editMode == ADD", which is therefore
redundant. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The connect() calls had different styles. Unify them to the one
that was used the most.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add negate buttons to the Tags, People, Location and Equipment
filters. Currently, if nothing is entered the filter is ignored
whether negate is on or off. One might think about filtering all
dives without tags, etc. instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Implement the close & reset functionality, by reseting the
application state to "Default". This is currently the only
state from where the fiter can be called.
To make it consistent with CTRL^F, clear the filter in the
hide() slot, which is called in both cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Move initialization to a separate function and connect that to the
reset button.
Two points of note:
1) Reseting the text-fields causes signals. Thus, signals have to
be ignored during reset. Do this with a new flag.
2) To make reset of the from-date work, the from-date has to be
initialized to a distinct value. Setting a default-constructed
QDateTime leaves the widget unchanged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Update the filter counts if dives were added removed by the
undo commands. The undo commands call into the filter model
at the right time so that hidden_by_filter is already set.
The filter model keeps track of the counts and emits a signal,
which is caught by the widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Display the number of dives shown. Copy the UI from the old filter
widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This way, templates in particluar can choose arbitrary
geometries for the profile image.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
instead of just the first
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This was missing in the export. We export separate hour and
minutes so the template can decide about the time format.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This makes it more like the plain TeX export, the main change
is in the structure of the template file (not included here).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
So far, the TeX export was intended to be used with plain TeX.
To make it compatible with LaTeX, we only need to make sure
there are no macro name clashes and remove plain TeX specific
calls.
So far, this works only for single dives as the export only
sets up macros to contain dive data and then read the actual
latex file (starting with \documentclass etc). Later, the
template should setup macros to be called from the export
file.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
When connecting to facebook, I get a warning that the connection
is not secure. It's a wild guess that this patch solves the
issue but I currenty cannot build with facebook support. So I cannot
check.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Last caller was removed in e0f473fcb49c8121a0a9c52bf0536049b0f342ed
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The temperature range 0-100 was inadequate in both supported
scales (Celsius and Fahrenheit). Extend the range to encompass
all physically meaningful values in both scales.
Use the default-values to set the minimum and maximum of the
UI-fields. Thus, these values are configurable in a single place.
In the future we should use a scale-independent representation
(e.g. mkelvin as in the rest of the code base). But this would
mean implementing a custom widget with a conversion function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
1) Choose the correct conversion function for comparison.
2) Add a unit suffix to the fields.
3) Update the suffixes on change of preferences.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On all (most?) places we use separate date/time fields for the time of a
dive, and we follow the setting from the preferences to format those.
Make the new filter widget consistent, with respect to the to and from
interval.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
The alignment of the 2 first lines of the new filter widget looked badly
aligned. Fixed by this simple change.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
In 891fcbf520f28ef6016d6171eba83c6773efca00 boolean parameters were
replaced by flags. Fix an error in this commit: IMPORT_IS_DOWNLOADED
should be IMPORT_PREFER_IMPORTED.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The "Rating label" had a superfluous space at the beginning.
Remove.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Commit 8e81d3f10087fa7ac600dcb18cfebf27716c4209 changed a bunch
of Ui classes to be subobject of the widget. For consistency do
the same with the filter widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In commit b0556abdd35f96b816ba11e40bf5707abe0c3ebf, the filter-widget
and the filter were connected by a direct function call. This led
to a rather obscure crash on application-close with Qt 5.12. The
crash is due to the Ui::MainWindow class being a sub-object of MainWindow,
but the FilterWidget2 being *not* a subobject.
What happens is that after calling the MainWindow destructor, the
subobjects are destructed, notably the Ui class. Then the base-class
destructor is called (which makes sense, as destructors are called
in reverse order of constructors).
But: the QObject destructor calls hide() on all still existing child-objects
according to Qt's object hierarchy, notably the visible FilterWidget2.
Now the FilterWidget2, on hiding, updates the MainWindow, which has already
destructed all its subobjects. Crash.
Prevent this crash by making FilterWidget2 a subobject of MainWindow
and thus have it destructed before running the QObject destructor.
Alternative ways would be:
1) Use signal/slot() instead of function calls, as these are automatically
removed if an object is destroyed.
2) Make the FilterWidget2 subobject a smart-pointer. Thus, we probably
wouldn't have to include the corresponding header.
3) Make the FilterWidget2 subobject a plain pointer and delete it
explicitly in the constructor.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In FilterWidget2::updateFilter() a new FilterData object is generated
and then copied onto the filterData member variable. Instead, modify
filterData directly. This seems also more logical from a semantic
point of view: Do we want to reset fields that were not set by the
user?
Contains trivial whitespace fix.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the latest version of the new filter-widget the connection
between widget and filter was lost. Connect both - but use a
simple function call instead of a signal, since it is not
immediately obivous where the connection should be made.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The logic in process_imported_dives() was faulty: Dives are merged
trip-wise in a loop. But if only autogenerated trips were supposed
to be merged, the trip would not be added.
Change the logic to always add the trip if it is not merged. To make
the loop easier to read, factor out the merge-trip-into-existing-trips
logic into a separate function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
After the downloading finished, the mainwindow-display is reset
via a signal. This is probably an artifact of old times, when
downloading was done into the main dive-list. Nowadays, this seems
to make little sense, as the main dive-list is not changed by download.
Remove the signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
DiveListBase had an explicit constructor that initialized the
"firstExecution" member variable. The latter was a development-
artifact that was never used. Remove the member and the constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
On desktop, replace all add_imported_dives() calls by a new undo-command.
This was rather straight forward, as all the preparation work was done
in previous commits.
By using an undo-command, a full UI-reset can be avoided, making the UI
react smoother.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In the future we want to download trips into a distinct trip-table
instead of the global trip-table to allow for undo of import.
Therefore add a trip_table argument to DiveImportedModel::repopulate()
and a trip_table member to DiveImportedModel. To correctly set these,
add a DownloadThread::trips() function, which currently simply returns
the global trip table.
Finally, make "struct trip_table *" a Q_METATYPE, so that the corresponding
arguments can be passed from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Trips were added to the core with the first dive of that trip.
With the recent changes that keep trips ordered by first dive,
this became counter-productive. Keeping a consistent state at
all times would mean resorting the trip table for every dive
that is added.
Instead, add all dives to a trip and *then* add the trip to the
core. Change the data-structures to not register trips-to-be-added
with individual dives, but keep them in a separate vector for
each undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently autogroup_dives() groups all dives in the global dive
list. Add a table parameter so that dives in any table can be
grouped. Thus it will be possible to pre-group dives on import,
which will be used for undo of import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add filter for dives having a planned dive computer or
a logged dive computer.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
... to reduce code duplication.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
The DiveTripModel was used to represent both, trip and list views.
Thus many functions had conditionals checking for the current mode
and both modes had to be represented by the same data structure.
Instead, split the model in two and derive them from a base class,
which implements common functions and defines an interface.
The model can be switched by a call to resetModel(), which invalidates
any pointer obtained by instance(). This is quite surprising
behavior. To handle it, straighten out the control flow:
DiveListView --> MultiFilterSortModel --> DiveTripModelBase
Before, DiveListView accessed DiveTripModelBase directly.
A goal of this commit is to enable usage of the same model by mobile
and desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The original name was just "Dives" which is not
descriptive enough. Use "Default file".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
Berthold Stoeger
Robert C. Helling
Jan Mulder
Lubomir I. Ivanov