| Age | Commit message (Collapse) | Author |
|---|
|
The initial downloader reused the XML parsing of SDA files that was
implemented early in order to support the information extracted from the
SDA with the java applet. But creating this intermediary XML file and
handing it off to the XML import function always seemed like an ugly way
to do things. This became even more obvious when adding more features to
the Uemis downloader.
This commit completely changes the downloader to instead create dives and
record them directly.
This also adds support for divespots (which are stored in a seperate
database that needs to be queried after the divelog and dive entries have
been combined - the Uemis firmware clearly was written by monkeys on
crack - oh wait: I'm trusting these same people to get the deco right?).
This commit leaves the SDA import capability in the XML parser intact.
I'll remove that later. Because of this it actually adds a few lines of
code, but the overall change will be a substantial code deletion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Actually, it's even better than that. Thanks to the new divecomputer
datastructure we can now simply look up in the dive_table which dives have
been downloaded from this specific Uemis SDA.
This patch removes the old gconf based code - which leads to one
unfortunate problem: the first time a Uemis SDA owner runs this version of
Subsurface against their data file ALL dives will be downloaded again
(which may not be a bad thing as we have improved a few other details of
Uemis support so now they get their deco information, surface pressure and
other data that we have started to support since 2.1). Still, this is not
ideal. But I didn't want to keep the legacy code around since this new
solution is so much cleaner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code pretended to support this for libdivecomputer based downloads,
but it had never been hooked up when the native Uemis downloader was
implemented. When I finally decided to close that feature gap I realized
that the original code was, shall we say, "aspirational" or "completely
bogus" and therefore never worked.
So instead of just hooking up the code for the Uemis downloader I instead
implemented this correctly for the first time for both libdivecomputer and
the native Uemis downloader.
In order not to have to mess with multithreaded Gtk development I simply
opted for a helper function that fires on a 100ms timeout and have it end
the dialog without a response. This way we can run the dialog while
waiting for the download to finish, still update the progress bar and
respond in a useful manner to the user clicking cancel.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The tec diving preference pane now allows us to set a partial pressure
threshold for each of the three gases. When the partial pressure surpasses
that value, the graph becomes red.
Fixes #12
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fairly simplistic change that modifies the way we calculate the "maxdepth"
for a particular dive as that is used to scale the plot vertically.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Not sure this is the best naming scheme (General Settings / Tec Settings)
but it's a start.
The idea is to have the settings that a recreational diver might care
about on the first page, and all the other stuff on the second one. Let's
see how this works out long term. For now I moved OTU over and added
toggles for the different partial pressure graphs (only the pO2 one is
implemented so far).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far this is done unconditionally. This already starts some of the
infrastructure for other gases, but so far only O2 is handled.
We also need a pressure scale on the right to make this useful - or we
need to do peek / trough pressure prints like we do for temperature and
depth.
Finally, I think I want to move the plot further down, maybe make the
whole plot area taller if we are plotting partial gas pressures as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We try to identify devices that are connected and their matching device
names (and mount paths in the case of the Uemis Zurich). Those are
presented as a drop down menu to choose from. The user can still override
this by simply entering a different device / path name.
On Windows this is not functional. How do I find out which drive letter
corresponds to the USB device named "UEMISSDA"? Similarly we need code
that finds serial ports that are present. For now we once again default
to COM3 (so this isn't a step back, but of course it's far from what we
want).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Added new function dive_list_destroy() in divelist.c
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This includes one major hack that uses a private data structure from
libdivecomputer to allow us to show the Uemis Zurich as one computer the
user can import from.
Once the user has chosen the Uemis we don't use libdivecomputer but our
own downloader. Just like in the libdicecomputer case this runs in its own
thread and updates the import dialog with progress information.
The code also keeps track of the last dive that has been downloaded from a
Uemis computer so we only import new dives on subsequent downloads. And
since the Uemis Zurich gives us its device id, we make this a "per
divecomputer" property for people who dive with multiple Uemis Zurich
computers.
This uses the debugfile infrastructure to allow easily collecting
debugging output - especially on Windows where by default console output
is lost.
Known limitations: when the Uemis runs out of space (it uses its
filesystem for communication with the host computer) we have no graceful
way to reset things. This is why the code doesn't try to download ALL
dives on the computer but instead download them in increments of ten
dives. This clearly needs to be addressed once I understand how to reset
the device.
The Cancel button of the import dialog isn't correctly hooked up, yet.
I still need to figure out how to gracefully shut down a download without
potentially hanging the device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Renamed the function pick_import_files() to import_files()
and added a declaration in "display-gtk.h". The declaration is "extern"
for consistency with download_dialog().
Since the new dialog is a real child off "main_window", we no longer need
some of the calls to gtk_widget_set_sensitive(), gtk_window_set_decorated()
to disable the parent, which previously was the old "Import" combined dialog.
Once the file list is retrieved, attempt to import each file and update
the list via report_dives().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Minor changes to file select box title
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Renamed "import_dialog" to "download_dialog" and also focused the download
dialog strictly on dive computer functionality. Removed the file button
and "filenames" checks from "download_dialog".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
As usual, things work slightly different on Mac. Quartz delivers some (but not
all) accelerator notifications differently. Command-Q and Subsurface->Quit now
work on Mac as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The default file name is OS specific and tries to follow the customs on
each of the OSs. It can be configured through the preferences dialog.
On MacOS we get a strange warning which appears to be a well documented
Gtk bug on MacOS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this commit, the user can choose between two printing modes:
- pretty print (with or without the dive profile)
- table print (which is nothing less than a table formating containing the
information)
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
|
|
With this commit we add a checkbox in the "Dive details" tab of the print
window. This checkbox allows to print the dives profile or not.
If you don't print the dives profile, you get 15 dives on the page (instead
of 6 with the profiles).
Future work should include:
- Ability to choose what is printed
- Table layout vs the current one (if no dives profile)
- Ability to choose the number of dives per page (play with the font size for this)
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
|
|
This completely changes how we keep track of selected dives: instead of
having an array listing the selection ("selectiontracker") or trusting
the gtk selection information, just save the information about whether a
dive is selected in the dive itself.
That makes it trivial to keep track of the state of selection across
group collapse/expand events, or when changing the tree view model. It
also ends up simplifying the code and logic in other ways.
HOWEVER, it does currently (re-)introduce an annoying oddity with gtk:
if you collapse a dive trip that has individual selections, gtk will
forget those selections ("out of sight, out of mind"), and when you do
*new* selections, the old hidden ones remain.
So there's some games required to make gtk do sane things. We may need
to either explicitly drop selections when collapsing trips, or make sure
the group entry gets selected when collapsing a group that has
selections in it. Or something.
There may be other issues introduced by this too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a "Save As" entry in the "File" menu allowing the user to specify the file in which to save
the data. This is useful as we no longer offer this option through the "Save" entry while the data
had been opened from an existing file.
Signed-off-by: Pierre-Yves Chibon
|
|
Pull dive-trip grouping from Dirk Hohndel:
"This turned into an updated pull request for the tree2 branch where I
implemented the date based grouping - but is actually a very different
topic: this adds the ability to edit multiple dives (and fixes some
issues with the dive editing overall). The reason for that is that it
reuses some of the infrastructure that I implemented in the tree2
branch for tracking the selected dives. More details in the commit
messages."
* 'tree2' of git://git.hohndel.org/subsurface:
Switch from date based to dive trip based grouping
Redo dive editing
Fix selecting and unselecting summary items
Apply sort functions to the correct model, don't select summary entries
Maintain selected rows when switching between list model and tree model
Create duplicate list model so sorting by columns works again
Improve tree model implementation
Allow date based grouping
|
|
This commit addresses two issues:
We now can add / edit / delete equipment from the edit dive dialog
We now can edit multiple dives at once
The latter feature has some interesting design constraints:
It picks the 'selected_dive' as the one to start the edit from - so if
this dive already has some information filled in, that information needs
to be overwritten before it is stored in all of the dives. Similarly, only
changes to the cylinders or weightsystems are recorded. Also, the notes
field is not editable in the multi dive edit mode (as that didn't seem
useful).
The workflow seems to work best if using the multi-edit right after
importing new dives from a dive computer. The user then can select all the
new dives and only needs to edit things like location, divemaster, buddy,
weights, etc. once.
This commit will create some obvious conflicts with the commit that adds
exposure protection tracking. It was implemented on top of the tree_view
changes as it reuses some of the infrastructure for tracking the selected
dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For simplicity and shortness, throughout subsurface exposure protection is
simply referred to as "suit".
Add the fields to the data structures, add the column to the dive_list
and the preferences dialog (once again with it being turned invisible by
default). Support loading and saving of the suit information.
Display the suit information in the Dive Info pane (this may be a bit
controversial as people could argue this should be in the Equipment pane)
and allow editing of the suit info, with our usual support for completion
and drop down lists to pick from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We keep track of the DIVE_INDEX of all selected dives and simply re-select
those dives after changing model (date based sort or sort by other
column).
There are a few TODOs left. We lose the sort direction (ascending /
descending) when switching models. We also don't correctly deal with the
user selecting summary rows in the tree model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the total weight carried on the dive in different weight systems
to the divelist. The column is by default not shown, which can be changed
in the preferences. The column is sortable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
No need for right-clicks. It's inconvenient on lots of laptops etc, so
allow just using the Dive menu as an alternative.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of using printf() to print the string updates ("Parsing sample
data" etc), introduce a function to show those strings in the graphical
progress bar itself.
Subsurface hasn't been a text-mode application in a long time ;)
This partially fixes the second todo entry from commit b0ba22a06879
("Show dive import error messages in the import dialog") and generally
makes for a more helpful import - at least for the largely error-free
cases.
Sadly, the messages that really come from within libdivecomputer itself
(like "suunto_vyper2.c:193: Failed to receive the answer.") when things
go really wrong are not caught. libdivecomputer does have a notion of a
logfile (set with "message_set_logfile()"), but that ends up being
really inconvenient.
Maybe we could use some pipe setup or something. Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On Linux and MacOS the subsurface_close_conf() doesn't really close the
config file (it flushes writes on MacOS), but on Windows it does
actually close the registry hkey.
Which is bad, if you change the settings multiple times - we assume that
the config file is open the whole time.
So add a "subsurface_flush_conf()" function, and call *that* when
changing configuration parameters. And call the close function only at
the very end.
Alternatively, maybe we should just open the config file separately
every time. I don't much care, maybe somebody else does.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If at least 2 dives are selected, show statistics of these dives on
Overall Stats. Otherwise, show the statistics of all dives. Temperature
is also added to the shown statistics.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Minor change to avoid adding statistics.h (moved the global variable and
external function declaration to display-gtk.h).
Another minor change to the text displayed for the "Stats" notebook page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
No additional statistics added, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The startup shell script workaround isn't needed anymore. The preferences
hotkey didn't work. Remove left-over menu separators.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
|
|
Move the About and Preferences menu item to the App menu.
Switch the accelerator key to be Meta (i.e., Command) instead of Control
This required a bit of restructuring of the code, but it's all for a good
cause.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
To do this a few things needed to move into the os specific files, but the
overall change is fairly small and the difference on the Mac is amazing.
Subsurface now becomes a Mac app with Mac toolbar and useful default
fonts.
Changed the CFBundleIdentifier to be the reverse DNS of the subsurface
site (sadly, 'torvalds' is not yet a TLD).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can load the correct icon on the Mac without ugly hacks in the
OS independent code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. and use this for the nitrox column, which can now be more complex
than just a single number.
The rule for the "nitrox" column is now:
- we look up the highest Oxygen and Helium mix for the dive
(Note: we look them up independently, so if you have a EAN50 deco
bottle, and a 20% Helium low-oxygen bottle for the deep portion, then
we'll consider the dive to be a "50% Oxygen, 20% Helium" dive, even
though you obviously never used that combination at the same time)
- we sort by Helium first, Oxygen second. So a dive with a 10% Helium
mix is considered to be "stronger" than a 50% Nitrox mix.
- If Helium is non-zero, we show "O2/He", otherwise we show just "O2"
(or "air"). So "21/20" means "21% oxygen, 20% Helium", while "40"
means "Ean 40".
- I got rid of the decimals. We save them, and you can see them in the
dive equipment details, but for the dive list we just use rounded
percentages.
Let's see how many bugs I introduced. I don't actually have any trimix
dives, but I edited a few for (very limited) testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds tested code for Linux and Mac OS, implementing the api that
Linus suggested.
The Windows code was moved into its own file, but hasn't even been compile
tested, yet.
In order to have just one interface to set or get a preference value we
encode TRUE as (void *) 1 and FALSE as NULL. This works consistently on
all platforms and regardless of whether we have 32 or 64 bit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way, when you have a new dive that you just imported from your dive
computer, you can just double-click on the dive and fill out all the
relevant information: location, notes, buddies and cylinder info.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This provides the relevant information for the currently selected dive
plus a bunch of statistics over all dives in the dive_table.
The visual design has lots of room for improvement
- right now the different fields change size
- it might be nice to have a more modern look for the entries
- the O2/He field is odd - for most divers the He value will
always be 0, so maybe we should only show He if there's at least one
dive that uses He? Also, we simply do a comma separated list of gases
for all the tanks used
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Just like SAC and OTU these can now be turned on and off through the
preferences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to do this just for the dive list, but the new cylinder view
will want to do a lot of the same boilerplate gtk stuff, so make it a
bit more generic and move it to gtk-gui.c.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The following are UI toolkit specific:
gtk-gui.c - overall layout, main window of the UI
divelist.c - list of dives subsurface maintains
equipment.c - equipment / tank information for each dive
info.c - detailed dive info
print.c - printing
The rest is independent of the UI:
main.c i - program frame
dive.c i - creates and maintaines the internal dive list structure
libdivecomputer.c
uemis.c
parse-xml.c
save-xml.c - interface with dive computers and the XML files
profile.c - creates the data for the profile and draws it using cairo
This commit should contain NO functional changes, just moving code around
and a couple of minor abstractions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Lubomir I. Ivanov
Pierre-Yves Chibon
Linus Torvalds
Miika Turkia
Henrik Brautaset Aronsen