| Age | Commit message (Collapse) | Author |
|---|
|
The dive fields are summary fields, the actual data needs to be in the
divecomputer specific fields.
Fixes #307
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use get_cylinder_index that handles SAMPLE_EVENT_GASCHANGE and
SAMPLE_EVENT_GASCHANGE2.
This also removes the need for a special case where get_gasidx returns
-1, because get_cylinder_index always returns the "closest" gas that it
finds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In an inconsistant XML file (like our own dives/test20.xml) it is possible
that a gas change event refers to a non-existing gas. In that case
get_gasidx returns -1 - which we shouldn't use as index into the arrays.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a bit painful, but we basically walk the samples and pick the
valid tank from the events. And then we do a simple discrete integration
to figure out the mean depth per tank and duration per tank. And then we
assemble all that into per tank statistics.
Strangely the value calculated here seems slightly higher than one would
expect from the overall SAC rate. This inconsistency should be
investigated a bit further, but my guess it it's based on the assumption
that the DC provided mean depth is possibly more accurate than what we can
calculate from the profile.
Fixes #284
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We translate only tags we know since possible
translations of custom tags (provided by the user)
may be out of context and therefore wrong.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds the possibility to shift the times of all selected dives
by a fixed amount to correct for time zone problems or mis-set dive
computer clocks.
Select the dives and right click in the dive list.
[Dirk Hohndel: added .ui file to FORMS and fixed some whitespace damage]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch removes a duplicated method: get_divenr and
get_index_for_dive. The two are exactly the same ( if my
c is not broken, but I may be broken since I'm working like
crazy for almost 30h nonstop. ), so please take a good look
before applying this one.
[Dirk Hohndel: Tomaz took the slightly broken of the two implementations,
so I switched that out for the correct one]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to make sure that the correct segment has the correct gas assigned
to it - and that those gases are correctly tracked when editing a manually
added dive as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We only copied the samples, but not the related cylinder data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Should have cleaned that up when committing the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The new implementation supports custom tags
which are provided by the user as well as
default tags which are provided by subsurface.
Default tags can be translated and will be written
to XML in their non-localized form.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
The dive planner always showed the depth in our internal units, ie
millimeter, in the sidebar that showed the plan points.
That made little sense in metric mode, and none at all in imperial. The
_graph_ showed things in meter and feet.
So make the DivePlannerPointsModel always convert things to and from the
user units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The one remaining helper function in there was moved to maintab.cpp (which
was the one remaining user).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
file requires <limits.h> to solve:
error: INT_MAX undeclared
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This compiles and looks about right, but it doesn't appear to work, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
11 is SAMPLE_EVENT_GASCHANGE, and thats the one that doesn't contain any
He-part. The type where He and O2 is packed togeather is 25,
SAMPLE_EVENT_GASCHANGE2.
Left to implement is to figure out the type of the event when we read
the xml, so we can create the right type there.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. otherwise the dive tags generally end up cleared when you download a
duplicate dive from another dive computer.
This uses MERGE_NONZERO, which means that if one of the dives has tags
set, we'll prefer those tags. If both dives have tags set, we take the
tags from the first ("preferred") dive.
We could do a "just or all the bits together" too. But this way we at
least take a set of tags that are consistent (ie we don't get both
"boat" and "shore" set unless one of the original dives already had that
inconsistency)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The events that had same time stamp were reversed in order on every new
load of the log file. This patch will keep the order static. (Changing
order is annoying when using version control to store the logs.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They do the "02=0 means air" thing autmatically, and make for less
typing. So use them more widely in places that looked up the o2 and he
permille values of a gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. so that different computers that have different ordering of the same
cylinders will see the end result the same way.
This also fixes up the sample sensor index and generates special initial
tank change events for the dive computers that had their cylinder
indexes renamed on them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Create a little widget that lists all the gases / tanks we know about and
allow the user to pick one of them.
Turns out that add_event only added events at the end of the list - but we
treat that list as chronologically sorted. So I fixed that little
mis-feature as well.
This does raise the question whether we need the inverse operation
(removing a gas change). And if there are other things that we should be
able to manually edit, now that we have the infrastructure for this neat
little context menu...
See #60 -- this doesn't address all of the issues mentioned there, but at
least deals with the 'headline' of the feature request...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
merge_text() could call strdup(NULL) if one pointer was "" and the other
NULL. This commit fixes that.
Reported-by: fhuberts
Analyzed-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A couple of these could clearly cause a crash just like the one fixed by
commit 00865f5a1e1a ("equipment.c: Fix potential buffer overflow in
size_data_funct()").
One would append user input to fixed length buffer without checking.
We were hardcoding the (correct) max path length in macos.c - replaced by
the actual OS constant.
But the vast majority are just extremely generous guesses how long
localized strings could possibly be.
Yes, this commit is likely leaning towards overkill. But we have now been
bitten by buffer overflow crashes twice that were caused by localization,
so I tried to go through all of the code and identify every possible
buffer that could be affected by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes two bugs:
- we overwrote the max depth that we read from an XML file with 0 if there
are no samples
- we didn't parse the DepthAvg tag in the DivingLog XML
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This creates a helper function called "gas_volume()" that takes the
cylinder and a particular pressure, and returns the estimated volume of
the gas at surface pressure, including proper approximation of the
incompressibility of gas.
It very much is an approximation, but it's closer to reality than
assuming a pure ideal gas. See for example compressibility at
http://en.wikipedia.org/wiki/Compressibility_factor
Suggested-by: Jukka Lind <jukka.lind@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code was written to get the SAC rate correct, but we probably do
want to have the duration and mean depth of the dive always be shown for
the non-surface-time.
So move the code from the sac-rate calculation to the generic dive fixup
part. This makes the dive list and statistics all show the duration as
the under-water duration, which is not necessarily the same as
"difference between beginning and end of dive".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We computed a made-up average depth based on the maximum depth, and used
that. That's questionable even if we didn't have any explicit average
depth to begin with, but it's particularly wrong if we did have an
explicit average depth to use.
Now, admittedly we have no way to actually create fake dives like this
with a particular average depth, so this really doesn't make any
difference in real life. But we should do this right.
Also, make the XML be in the format that subsurface actually saves
things in (mainly things like cylinder sizes having an extra decimal
place, but also ordering of XML elements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We even documented that we did SAC in bar*l/min, but the "S" in SAC
stands for "Surface". So we should normalize SAC rate to surface
pressure, not one bar.
It's a tiny 1% difference, and doesn't actually matter in practice, but
it's noticeable when you want to explicitly test for SAC-rate by
creating a test-dive that averages exactly 10m. Suddenly you don't get
the round numbers you expect.
[ Side note: 10m is not _exactly_ one extra atmosphere according to our
calculations, but it's darn close in sea water: the standard salinity
of 1.03 kg/l together with the standard acceleration of 9.81m/s^2
gives an additional pressure of 1.01 bar, which is within a fraction
of a percent of one ATM.
Of course, divers have likely chosen that value exactly for the math
to come out that way, since the true average salinity of seawater is
actually slightly lower ]
So here's a few test-dives, along with the SAC rate fixup to make them
look right.
(There's also a one-liner to dive.c that makes the duration come out
right if the last sample has a non-zero depth, and the previous sample
did not: one of my original test-dives did the "average 10m depth" by
starting at 0 and ending at 20m, and dive.c got a tiny bit confused
about that ;)
[ The rationale for me testing our SAC rate calculations in the first
place was that on snorkkeli.net user "Poltsi" reported that our SAC rate
calculations differ from the ones that Suunto DM4 reports. So I wanted
to verify that we did things right.
Note that Poltsi reported differences larger than the difference of
BAR/ATM, so this is not the cause. I'll continue to look at this. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We have this oddity in "fixup_dive()" that we fix up the dive water
temperates and durations by looking over all the dive computer data.
But we actually call that *before* we've fixed-up the dive computer data.
So the water temperature is there in the samples, but hasn't made it to
the generic dive computer water temperature yet, so then it doesn't make
it into the dive structure either.
Until the *second* time, when we have load the (partially fixed-up) data.
Acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Downloading dives from the dive computer attempts to merge same dives,
e.g. when multiple dive computers are used. If the mean depth is zero when
downloading from DC this comparison fails resulting in not merging the
multiple dive computers used on one dive. This patch skips the mean depth
comparison when this information is not available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Better helper functions make for easier to understand code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now load and save this in the XML file, we do the right thing when
merging dives and show the edited air temperature in the Dive Info
notebook when a divecomputer doesn't have an air temperature.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Two separate bugs.
a) Air cylinders were created with o2=209 and no other value set.
sanitize_gasmix() turned that into o2=0 which meant that this cylinder was
now identified as "nodata", i.e., unset.
We now set a fake cylinder name to deal with that issue.
b) the gaschange event is inherited from libdivecomputer and therefore
only supports 1 percent granularity for o2 and h2. Since we didn't round
when assigning the value we ended up with air being stored as o2=20 he=0
which of course then didn't match air anymore (which we have defined as
208 <= o2 <= 210).
We now use o2=210 for air in the planner and carefully round the permille
values whenever we convert into percent - and compare gases with percent
granularity as well.
A better fix for b) would be to change the Subsurface event to not simply
copy the libdivecomputer behavior and use percent granularity but support
permille instead. But this closely before the 3.0 release that seemed like
a far too invasive change to make - the changes to the planner should have
no impact outside the planner module.
Reported-by: Chris Lewis <chrislewis915@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This showed up when suddenly some of the test dives no longer got merged
when loaded twice. As I moved maxdepth up into the dive structure and
added the code to fixup the data from what is in the divecomputer I missed
the part where the function is exited early if there are no samples. This
patch corrects that oversight.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds watertemp and airtemp to the dive, populates them in fixup and
uses them elsewhere in the code.
WARNING: as a sideeffect we now edit the airtemp in the dive, but we never
display this in the DIve Info notebook (as that always displays the data
from the specific selected divecomputer). This is likely to cause
confusion. It's consistent behavior, but... odd. This brings back the
desire to have a view of "best data available" for a dive, in addition to
the "per divecomputer" view. This would also allow us to consolidate the
different pressure graphs we may be getting from different divecomputers
(consider the case where you dive with multiple air integrated computers
that are connected to different tanks - now we could have one profile with
all the correct tank pressure plots overlayed - and the best available (or
edited) data in the corresponding Dive Info notebook.
This commit also fixes a few remaining accesses to the first divecomputer
that fell through the cracks earlier and does a couple of other related
cleanups.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When starting on this quest to stop using the first divecomputer instead
of data for the whole dive in commit eb73b5a528c8 ("Duration of a dive is
the maximum duration from all divecomputers") I introduced an accessor
function that calculates the dive duration on the fly as the maximum of
the durations in the divecomputers.
Since then Linus and I have added quite a few of the variables back to the
dive data structure and it makes perfect sense to do the same thing for
the duration as well and simply do the calculation once during fixup.
This commit also replaces accesses to the first divecomputer in
likely_same_dive to use the maxdepth and meandepth of the dive (those two
slipped through the cracks in the previous commits, it seems).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is currently only used in one place (in statistics.c), but it
certainly is consistent with the other recent changes to avoid using only
the first divecomputer when trying to make statements about a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 904aa0be0d0e ("Do more dive fixup for each dive computer") two
new helper functions were introduced that sadly both incremented variables
without initializing them, first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Populate during dive fixup as the maximum depth shown by all the
divecomputers. Use this value (instead of the one in the first
divecomputer) in printing, statistics, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code only populated the maxtemp based on the samples of a
dive and then in statistics.c checked if there was no such temperature and
replaced it with the water temperature of the first divecomputer.
It makes much more sense to add the water temperature information in every
divecomputer to the min / max calculation during the dive fixup phase.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The fixup_dives() code used to only look at the first divecomputer,
which meant that minimun temperatures etc for the dive would only ever
come from the primary divecomputer.
This splits up the code that walks over the divecomputer into a function
of its own, and iterates over all computers in fixup_dive() calling into
it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit b6c9301e5847 ("Move more dive computer filled data to the
divecomputer structure") we moved the fields that get filled in by the
dive computers to be per-divecomputer data structures.
This patch re-creates some of those fields back in the "struct dive",
but now the fields are initialized to be a reasonable average from the
dive computer data. We already did some of this for the temperature
min/max fields for the statistics, so this just continues that trend.
The goal is to make it easy to look at "dive values" without having to
iterate over dive computers every time you do. Just do it once in
"fixup_dive()" instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of maintaining a rolling average and re-calculating it at each
stage, just calculate the surface_pressure average the natural way: as
the sum divided by the number of entries.
This results in a single rounding, rather than doing rounding multiple
times and possibly rounding wrong as a result.
Not that we care all that deeply about the LSB of the mbar value, but
the code is simpler and more obvious this way too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Anton Lundin
Maximilian Güntner
Robert Helling
Tomaz Canabrava
Linus Torvalds
Lubomir I. Ivanov
Patrick Valsecchi
Miika Turkia