| Age | Commit message (Collapse) | Author |
|---|
|
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having the tank_info declared in models.cpp seemed unintuitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The UI had only stubbed this code out. This adds the implementation of the
helpers and calls them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of passing pointers to GError around we pass just pointers to
error message texts around and use kMessageWidget to show those. Problem
is that right now the close button on that doesn't do a thing - so the
error stays around indefinitely. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The DEBUGFILE logic isn't needed anymore. Nor are helpers dealing with
model / datastructure updates. Nor conditional compiles to use Gtk instead
of Qt.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Plus a couple of minor formatting changes
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
i
Added the code to show the cylinders from a dive,
this code also already permits additions from the
interface, so the user can click 'add' and insert
what he wants there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #85
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Conditional inclusion of libzip, xslt and osm-gps-map just
makes testing more cumbersome, since testers might lack
Subsurface features without knowing.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The compiler on MacOSX wouldn't build Subsurface when bool
was redefined.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Functionality is unchanged, except we now have a nice process_dives
function that deals with all the logic and that gets called from
report_dives from the Gtk code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This only allows for a logical "AND" - so only dives that all of the
selected tags are displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This literally just creates the dialog and does not hook things up with
the dive list.
The idea is to abstract out the idea behind the invalid dives to allow the
user to select / deselect all kinds of dives and then do statistics on
the selected ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Qt ui will need to read the dive_table to populate widgets with
dives. Gtk functionality in init_ui is required to parse the dives.
Split init_ui to allow parsing to proceed and complete before Qt ui
mainwindow constructor is called.
Play with qDebug()'s printf style (Thiago!)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Added the code that will load and populate the Tank Info
ComboBox that`s used by the user to select the Cylinder
description.
Code curerntly implements more than the GTK version since
the GTK version of it was a plain-list, this one is a
table based model that can be used in ListViews ( like
we use now in the ComboBox ) but also in TableViews
( if there`s a need in the future to see everything
that`s catalogued in the Tank Info struct. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Student (training), Instructor (teaching), Photo and Video
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the salinity is 10000 we show (but do not set) the Freshwater tag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also trim the redundant "Dive" text from "Lake Dive", "Pool Dive", ....
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
[Dirk Hohndel: minor cleanups]
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And as we need the names for that, simplify the way we show the tags in the
Dive Info tab (and mark them for translation while we are at it).
In the process I renamed the constants to DTAG_ from DTYPE_ (and made
their nature as being just bits more obvious).
Also mark the box on the Info tab "Dive Tags", not "Dive Type".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This started out as a way to keep dives in the dive list but being able to
mark them as 'invalid' so they wouldn't be visible (with an option to
disable that feature).
Now it supports an (at this point, fixed) set of tags that can be assigned
to a dive with 'invalid' being just one of them (but one that is special
as it gets some additional support for hiding such dive and marking dives
as (in)valid from the divelist).
[Dirk Hohndel: merged with the latest code and minor changes for coding
style and consistency. Ensure divelist is marked as
modified when changing 'invalid' tag]
Signed-Off-By: Jozef Ivanecký (dodo.sk@gmail.com)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is simplistic & brute force: any function that touches Gtk related
data structures is moved to divelist-gtk.c, everything else stays in
divelist.c.
Header files have been adjusted so that this still compiles and appears to
work. More thought is needed to truly abstract this out, but this seems to
be a good point to commit this change.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove the boolean parameter from parse_file; the code is more readable
by having an explicit call to set_filename() where necessary, rather
than a boolean parameter.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
|
|
This is simplistic & brute force: any function that touches Gtk related
data structures is moved to divelist-gtk.c, everything else stays in
divelist.c.
Header files have been adjusted so that this still compiles and appears to
work. More thought is needed to truly abstract this out, but this seems to
be a good point to commit this change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove the boolean parameter from parse_file; the code is more readable
by having an explicit call to set_filename() where necessary, rather
than a boolean parameter.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
|
|
Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that
the project still builds.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
|
|
get_cylinder_index() looks up which cylinder to use based on the
gaschange event that describes the mix. However, it was both buggy and
not very good.
It was buggy because it didn't understand about our air rules, and it
was not very good because it required an exact match (after rounding our
permille-based numbers to percent).
So fix it to use the right permille values, and look for a closest match
(using the normal sum-of-squares distance function - although I wonder
if we should consider helium percentages to be "more important" and give
them a stronger weight).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. so that different computers that have different ordering of the same
cylinders will see the end result the same way.
This also fixes up the sample sensor index and generates special initial
tank change events for the dive computers that had their cylinder
indexes renamed on them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Create a little widget that lists all the gases / tanks we know about and
allow the user to pick one of them.
Turns out that add_event only added events at the end of the list - but we
treat that list as chronologically sorted. So I fixed that little
mis-feature as well.
This does raise the question whether we need the inverse operation
(removing a gas change). And if there are other things that we should be
able to manually edit, now that we have the infrastructure for this neat
little context menu...
See #60 -- this doesn't address all of the issues mentioned there, but at
least deals with the 'headline' of the feature request...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This generates a .DLD file of selected dives to be uploaded to
divelogs.de. The actual upload functionality along with sensible user
interface is still to be implemented. However, the resulting file from
this patch is tested to work (as far as I can tell) using upload API of
divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Basic functionality is implemented but at least support for multiple
cylinders is missing. Event/alarm support is only partial.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code has an embarrassing error in its logic. It picked the
last dive in the table and made sure that the relative start time was
either N minutes after 'now' or N minutes after the last dive ends,
whichever is later.
But once the planned dive has been added to the dive list (so once we have
a first depth and time entry, that last dive now is the planned dive. And
every time focus left the start time field the start time would be
recalculated relative to the end of the dive we are currently planning.
With this patch we instead simply remember the number of the last dive
just as we create the dive plan and use that to look up the end time of
previous dive. I could have just stored that end time but I figured maybe
there could be other reasons to go back to the last dive before the
planned dive, so this seemed cleaner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This creates a helper function called "gas_volume()" that takes the
cylinder and a particular pressure, and returns the estimated volume of
the gas at surface pressure, including proper approximation of the
incompressibility of gas.
It very much is an approximation, but it's closer to reality than
assuming a pure ideal gas. See for example compressibility at
http://en.wikipedia.org/wiki/Compressibility_factor
Suggested-by: Jukka Lind <jukka.lind@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Uses profile.c:evn_foreach() to retrieve the number of events, which
if zero, no table is added in the dialog and the label is added instead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Commit 90d3c5614a9c ("Centralising and redefining values as integers")
broke SAC-rate calculations. In particular, it changed "to_ATM()": to
use the centralized SURFACE_PRESSURE helper define, but in the process
it changed a floating point calculation to an integer calculation, and
it threw away all the fractional details. Any user of "to_ATM()"
basically dropped to an accuracy of a single atmosphere.
The good news is that we didn't use to_ATM() for things like depth
calculations, but only for cylinder pressures. As a result, the error
ends up being relatively small, since the pressures involved are big,
and thus the error of rounding to whole atmospheres is usually in the
1% range. The cylinder sizing tends to be off by more than that
anyway. But it was wrong, and not intentional.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And report error if XSLT stylesheet not found
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This does a final pass after all the selection logic, and notices if we
have dive trips that are selected, but that have no dives in them
selected. In that case, we assume that the user wanted to select all
dives in that trip.
NOTE! This still allows a range selection that selects the dive trip
entry and a few dives under the trip. If a trip has any dives selected
in it, we leave that manual selection alone. So this new logic really
only triggers on the case where somebody selected *just* the trip.
Note: unselecting the trip still leaves the dives under it selected,
because having a dive trip that isn't selected have all the dives under
it be selected is normal, and we can't recognize that as some kind of
special event.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
..they are of a higher quality anyway, and this way we have one less
library to worry about. And this way there is nobody who can claim that
openssl is not a system library and thus not compatible with the GPL.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Better helper functions make for easier to understand code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now load and save this in the XML file, we do the right thing when
merging dives and show the edited air temperature in the Dive Info
notebook when a divecomputer doesn't have an air temperature.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Printf is not a way to issue warnings and errors. This is a very late
addition but seems necessary for a viable release of the planner.
This also adds one artificial limit and two warnings:
a) no dives deeper than 400m
b) warning of potentially very long calculation times for dives longer
than 3h (180min) before the ascent and dives deeper than 150m
It also creates quite a number of new strings that need to be translated
(and marks a few existing ones for translation as well).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Two separate bugs.
a) Air cylinders were created with o2=209 and no other value set.
sanitize_gasmix() turned that into o2=0 which meant that this cylinder was
now identified as "nodata", i.e., unset.
We now set a fake cylinder name to deal with that issue.
b) the gaschange event is inherited from libdivecomputer and therefore
only supports 1 percent granularity for o2 and h2. Since we didn't round
when assigning the value we ended up with air being stored as o2=20 he=0
which of course then didn't match air anymore (which we have defined as
208 <= o2 <= 210).
We now use o2=210 for air in the planner and carefully round the permille
values whenever we convert into percent - and compare gases with percent
granularity as well.
A better fix for b) would be to change the Subsurface event to not simply
copy the libdivecomputer behavior and use percent granularity but support
permille instead. But this closely before the 3.0 release that seemed like
a far too invasive change to make - the changes to the planner should have
no impact outside the planner module.
Reported-by: Chris Lewis <chrislewis915@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds watertemp and airtemp to the dive, populates them in fixup and
uses them elsewhere in the code.
WARNING: as a sideeffect we now edit the airtemp in the dive, but we never
display this in the DIve Info notebook (as that always displays the data
from the specific selected divecomputer). This is likely to cause
confusion. It's consistent behavior, but... odd. This brings back the
desire to have a view of "best data available" for a dive, in addition to
the "per divecomputer" view. This would also allow us to consolidate the
different pressure graphs we may be getting from different divecomputers
(consider the case where you dive with multiple air integrated computers
that are connected to different tanks - now we could have one profile with
all the correct tank pressure plots overlayed - and the best available (or
edited) data in the corresponding Dive Info notebook.
This commit also fixes a few remaining accesses to the first divecomputer
that fell through the cracks earlier and does a couple of other related
cleanups.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When starting on this quest to stop using the first divecomputer instead
of data for the whole dive in commit eb73b5a528c8 ("Duration of a dive is
the maximum duration from all divecomputers") I introduced an accessor
function that calculates the dive duration on the fly as the maximum of
the durations in the divecomputers.
Since then Linus and I have added quite a few of the variables back to the
dive data structure and it makes perfect sense to do the same thing for
the duration as well and simply do the calculation once during fixup.
This commit also replaces accesses to the first divecomputer in
likely_same_dive to use the maxdepth and meandepth of the dive (those two
slipped through the cracks in the previous commits, it seems).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is currently only used in one place (in statistics.c), but it
certainly is consistent with the other recent changes to avoid using only
the first divecomputer when trying to make statements about a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Tomaz Canabrava
Henrik Brautaset Aronsen
Amit Chaudhuri
Pierre-Yves Chibon
Ďoďo
Alberto Mardegan
Linus Torvalds
Miika Turkia
Lubomir I. Ivanov