| Age | Commit message (Collapse) | Author |
|---|
|
The import of setpoint values is tested with Seabear data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This parses the basic metadata of a dive when importing Divinglog
database. (Discarding deleted dives is my best guess as I do not have
that in my sample dive.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For the proper calculation, we need to take salinity and surface pressure
into account (rather than depth = bar * 10 - 10)
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and
Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set
up a dive plan given certain standard gases.
Instead of trying to verify the complete plans it checks that we switch to
the deco gases at the right depth and the complete duration of the dive
matches our expectation.
The test intentionally fails right now for imperial as we have the wrong
switch depth for Oxygen. See how useful tests are?
On the downside, the test does NOT produce the same plan as Subsurface
when I try to create a consistent setup for both - and I have not been
able to figure out why. There must be some other parameters that I'm not
setting, but I haven't identified them, yet. It's very small differences,
for example in the metric case the stops at 21m, 9m, and 6m are each one
minute shorter in the test than it what Subsurface calculates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It improves (increases) gradients for all the compartments,
so more free gas can be created in the divers body. Next gradients
will converge, so the volume won't exceed the safe limit, indicated
by the crit_volume_lambda parameter.
Function takes time of the last deco in seconds.
Requires vpmb_start_gradient() to be run before.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
|
|
Check during the trial_ascent() if existing pressure gradient is
smaller than previously calculated max gradient. If not, ascent
is impossible from the vpm-b's point of view.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
|
|
Calculate the max difference between tissue saturation and ambient
pressure that can be accepted during the ascent.
Partial results are kept for later improving in next CVA iterations
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
|
|
This function calculates the size of nuclei at the end of deco,
then simulates their regeneration, to the moment before the deco.
This is redundant as nuclear regeneration is a very slow process.
Function should be called with time in seconds, just before the ascent.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
|
|
This adds support for importing individual O2 sensors from a CSV file,
e.g. an APD log viewer file.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In subsurface we store no value as a NULL pointer everywhere, but
sometimes some structures returns a empty field as a empty string.
This teaches our helper copy_string to return NULL if you try to copy a
empty string.
This fixes a bug where we store buddy and divemaster in git as empty
strings if they passed via MainTab::saveTaggedStrings().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The longer I stared at the existing code the less it made sense.
So instead I rewrote it in a way that seems logical to me. And added a
boatload of debugging output (which needs to be removed, of course).
I tested this against more than a hundred dives and it seemed to always
pick the right fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Save and load a usually unused copy of the preferences with the units that
were active the last time the dive list was saved to git storage (this
isn't used in XML files); storing the unit preferences in the data file is
usually pointless (that's a setting of the software, not a property of the
data), but it's a great hint of what the user might expect to see when
creating a backend service that visualizes the dive list without
Subsurface running - so this is basically a functionality for the core
library that Subsurface itself doesn't use but that another consumer of
the library (like an HTML exporter) will need.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was a poorly implemented hack when we executed the reverse geo lookup
in the main thread and opening a V2 file could take a very long time. We
need to do the "Welcome" message quite differently.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also change the name of the enum and make sure all the inner functions get
passed the remote transport information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This change once again tests if the remote can be reached. Even with a
fairly big data file and a medium speed internet connection the remote
sync is fast enough to call it nearly instantaneous. Maybe a couple of
seconds.
We may need more checks / different heuristics / warnings if the sync
didn't happen, etc. But for now this should allow more reasonable testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We always thought that a dive had a dive site
and that a dive really exists. but if we go
to add dive and then go to add dive site,
none of those exist yet and then we got a crash.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As a side effect this changes the signature of plan(): Before it
returned an int that was supposed to be possibly an error but
we never bothered to check it. So now it's bool indicating if the
planner did add stops.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
taglist_added() simply figures out the tags that are in the new list but
not in the original list.
taglist_dump() makes debugging things easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
save_one_dive_to_mb() is very useful (but there was a namespace collision
with another helper in save_git.c)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a new divelist context menu entry which asks for a URL. The file
is retrieved and if it is an image it is added to the cache and the url
is associated to dives as with local files.
NB this currently only works with URLs pointing directly to images. But it
should not be too hard to add the possibility to add a direction via an html
file and its image tags.
To test: open dives/test43.xml and delete the image and then add the URL
http://euve10195.vserver.de/~robert/wreck.jpg
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Factor out image load to find timestamp from loop over dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use more explicit variabel names and make the get timestamp function actually
return the timestamp rather than getting a pointer argument
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #853
[Dirk Hohndel: fixed test compile]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
XSLT conversions create V2 XML files, but we shouldn't abort when we parse
those without having the user informed about the potential slowness - all
XSLT based imports are slow, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This add support for Seabear's new import format that is used by H3 and
T1. In the future also the Hudc should switch to the new format. The
main difference to the old one is that time stamps are no longer
recorded in the samples, but intervali is specified in the header.
The header contains other useful information as well that we should
build support for. E.g. surface pressure, gas mixes, GF, and mode might
be useful additions later on.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Seperated getting image timestamp from picture_load_exif_data() and
ShiftImageTimesDialog::syncCameraClicked() into picture_get_timestamp()
and seperated checking timestamp from dive_create_picture() to
dive_check_picture_time().
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This avoids a possible warning when calling this function with a string
literal as second argument.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is somewhat invasive as aborting the XML file read requires us to
report things up the recursive parsing chain.
What we really need to do here is to ask the user how they want to use the
data from reverse geo lookup. But for now we only warn about the fact that
this can take a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And hook things up when double clicking the globe.
The user experience isn't consistent with what we do on the main tab
(i.e., no coloring of fields that are changed), but it seems to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this all references to these members should be gone and all the code
should be switched over to the dive site infrastructure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a bit awkward now. We are downloading what looks like fake dives
in the v2 format. So we create a dive site for every single fix.
After we merge those new dive sites into the existing dives we need to
throw away all the dive sites that weren't used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the last few dozen commits change the format in irreversible ways
and could therefore be destructive and lose data for testers of the
development version, let's try to be extra careful and create "special"
backup files that aren't overwritten by subsequent backups. At least this
way people can go back to the previous state.
Of course people using the git backend don't have to worry about this as
they always can go back to any earlier save.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds another useful helper function as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Read and write divesite sections in the XML file.
Read divelogs of version 2 and create dive site structures on the fly.
Read version 3 files that have divesiteid instead of location / gps.
Saves version 3 files where dives no longer have location and gps but
instead refer to a divesiteid
The commit contains quite a few fprintf(stderr,...) in order to allow
better monitoring of the parsing / transforming of locations and gps to
dive sites. This will need to be removed later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This leaves location and gps coordinates in the struct dive to allow a
step by step migration.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We had two functions doing exactly the same thing. Let's drop the one with
the highly confusing name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes #826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The ratio between SAC and oxygen metabolism rate can be assumed constant
but not the metabolism rate. So we better base our calculation on the ratio
that uses the SAC from the preferences as that pairs well with the O2
consumption from the preferences.
Hence we ran remove the sac parameter from fill_pressures().
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When planning a dive, the gas consumption is based on a user configured SAC.
Thus we should use that SAC and not try to recompute it from samples.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... and repair a failed rebase (sorry).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
still needs some work
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will allow us to download the dives from the dive computer into a
separate table just for that purpose and not into the main dive_table.
I really dislike the code that's in place that dates back to the very
earliest code written for Subsurface. Dumping the dives straight into the
main dive_table seems really stupid to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
No idea why I didn't notice earlier that this was missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Miika Turkia
Robert C. Helling
Dirk Hohndel
Jan Darowski
Anton Lundin
Tomaz Canabrava