| Age | Commit message (Collapse) | Author |
|---|
|
The brainless idiot who implemented commit c539c8f86192 ("Remove the .used
member of the cylinder structure") clearly worked on the basis of "it
compiles, it must be perfect".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This also fixes a couple of issues with the existing code:
- removes a memory leak
- treats null and "" the same
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is core logic, not UI code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
First step towards getting the "add to trip" logic in the divelist context
menu to be consistent and correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These were leftover in commit 90638180d21a ("Use the used flag on
cylinders in get_dive_gas").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to do this just for dive computer downloads, but we should do it
for all imports, so that merging new import data always does the
expected thing: any new dive computers will be added to the end of the
list of preexisting dives, rather than the other way around.
(Of course, if you set the "prefer downloaded" flag, that reverses this
logic, and makes the newly imported dive computer data be the primary
dive computer. That flag is currently only exported for dive computer
downloads, not for imports).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now when we have a used flag on every cylinder that are set in
mark_used_tanks we can use it here.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They happen - maybe the cylinder actually warmed up, or maybe the user
entered just a ending pressure without a starting pressure. Regardless,
just ignore cylinder pressure changes that go up.
Also ignore cylinders with a zero ending pressure: that's really a
*missing* pressure rather than an actual zero pressure. As Dirk says,
the scuba regulators don't even work without a healthy positive pressure
differential, so even when you breathe down a tank to "empty", it won't
be at zero pressure (this is true even with gauge pressure, where zero
means "atmospheric pressure").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Dive gets dereferenced in get_surface_pressure_in_mbar().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
tissue_tolerance wasn't used after it was assigned.
type was overwritten after it was assigned.
serial was overwritten after the last /= 100.
event is assigned in the for loop.
clear isn't used after the assignment
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Minor change to the perl postprocessing script and resulting changes to
the affected source files.
This deals with two issues:
- "foreach"-like structures were not always treated correctly
- some longer calculations that ended on "+ constant" were reformatted in
a rather unatractive manner
In one source file (divelist.c) I ended up adding braces to the sources...
trying to cascade the indentation further down without having the block
there seemed a lot more trouble than it's worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
rint() is "round to nearest integer", and does a better job than +0.5
(followed by the implicit truncation inherent in integer casting). We
already used 'rint()' for values that could be negative (where +0.5 is
actively wrong), let's just make it consistent.
Of course, as is usual for the messy C math functions, it depends on the
current rounding mode. But the default round-to-nearest is what we want
and use, and the functions that explicitly always round to nearest
aren't standard enough to worry about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
SAC should be calculated in relationship to surface pressure, not "1 bar".
I also realize that we have a few other cases where we do the same
mistake: the partial pressure calculations do things like
po2 = o2 / 1000.0 * depth_to_mbar(sample->depth.mm, dive);
which is wrong as well - the partial pressure is also relative to
standard atmospheric pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
* Set correct calloc parameters order(num, size)
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We try to do the most reasonable thing. If you have an existing dive and
merge a just downloaded dive with it - the you want the existing id.
If you merge two consecutive dives, then the start of the merged dive is
the earlier of those two dives so we keep that id.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixing 2 typos on comments.
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When toggling autogroup in the menu we ended up setting the NO_TRIP flag
for dives that were removed from a trip that was created by autogroup. So
toggling things on and off and on again meant no more auto grouping.
Fixes #337
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
calculate_cns():
The check if prev_dive is NULL should be before calling
prev_dive->when.
Reported by the program cppcheck.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So we can't return garbage.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
this is probably more a workaround than a proper fix to a problem which
I think only happens if started with no dive loaded and then create one.
in that case, deselect_dive is called after saving the dive but probalby
before it was added to the dive list properly resulting in an underflow
of amount_selected.
Signed-off-by: Martin Gysel <me@bearsh.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes #293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch removes a duplicated method: get_divenr and
get_index_for_dive. The two are exactly the same ( if my
c is not broken, but I may be broken since I'm working like
crazy for almost 30h nonstop. ), so please take a good look
before applying this one.
[Dirk Hohndel: Tomaz took the slightly broken of the two implementations,
so I switched that out for the correct one]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The new implementation supports custom tags
which are provided by the user as well as
default tags which are provided by subsurface.
Default tags can be translated and will be written
to XML in their non-localized form.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
divelist.c:
get_dive_date_string()
get_short_dive_date_string()
get_trip_date_string()
MinGW support for *printf and parameter positions (e.g. %1$d)
is horribly broken. Instead of implementing *proper* support
for this feature Microsoft decide to ignore the standard (again)
and they implement new functions with the '_p' suffix,
such as 'sprintf_p', which seem to be available from a 2003 runtime.
To top that 'sprintf_p' is not really a 'sprintf' but rather
a 'snprintf'.
It seems that the MinGW people ignore the issue and do not provide
wrappers of any sort, or at least for the current recommended compiler
for Qt 4.8.5 on Windows - which is a 4.4.0. A note of warning;
inspecting how MinGW does certain things in headers such as stdio.h,
can ensue bad dreams or other negative effects on to the viewer.
This forces us to move the following functions from the 'back-end'
(divelist.c) to the 'front-end' (qt-gui.cpp) and use QString.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
None of this is used anywhere
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There's lots more stuff that can go.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Most of this is Gtk related, some of it is helpers that we don't need
anymore. I love the diffstat.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There's still a ton more left, but this is a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This compiles and looks about right, but it doesn't appear to work, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One more corner case that we cover correctly.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
You cannot merge dives if there is another, unselected dive "between"
them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is fairly straight forward. What I dislike is the check for the magic
number of "14 indeces". I'm sure there's a better way to tell if more than
one dive is selected...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way the spacing of the elements looks nicer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I just need to write a tool that does this...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
Dirk Hohndel
Willem Ferguson
Anton Lundin
Linus Torvalds
Tomaz Canabrava
Boris Barbulovski
Rodrigo Severo
Lubomir I. Ivanov
Martin Gysel
Tomaz Canabrava
Maximilian Güntner