| Age | Commit message (Collapse) | Author |
|---|
|
Previously we would simply show the first dive in the divelist - which
worked fine in the default sort by trip setting and assuming that there
are no dives from the future in the divelist.
With this commit we actually find the correct dive in the divelist and
select it instead. If you sort by depth you will see the dive move around
in the divelist, but it will stay selected and visible in the profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As the user enters data into the entry fields, that data is validated and
as soon as there is enough data we start constructing a dive profile,
including the final ascent to the surface, including required deco stops,
etc.
This commit still has some serious issues.
- when data is input that doesn't validate, we just print a warning to
stdout - instead we need to change the backgroundcolor of the input
field or something.
- when we switch to the last dive in order to show the profile we don't
actually search for the last dive - we just show the first one in the
tree. This works for the default sort order but is of course wrong
otherwise
I'm sure there are many other bugs, but I want to push it out where it is
right now for others to be able to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This comes with absolutely no gui - so the plan literally needs to be
compiled into Subsurface. Not exactly a feature, but this allowed me to
focus on the planning part instead of spending time on tedious UI work.
A new menu "Planner" with entry "Test Planner" calls into the hard-coded
function in planner.c. There a simple dive plan can be constructed with
calls to plan_add_segment(&diveplan, duration, depth at the end, fO2, pO2)
Calling plan(&diveplan) does the deco calculations and creates deco stops
that keep us below the ceiling (with the GFlow/high values currently
configured). The stop levels used are defined at the top of planner.c in
the stoplevels array - there is no need to do the traditional multiples of
3m or anything like that.
The dive including the ascents and deco stops all the way to the surface
is completed and then added as simulated dive to the end of the divelist
(I guess we could automatically select it later) and can be viewed.
This is crude but shows the direction we can go with this. Envision a nice
UI that allows you to simply enter the segments and pick the desired
stops.
What is missing is the ability to give the algorithm additional gases that
it can use during the deco phase - right now it simply keeps using the
last gas used in the diveplan.
All that said, there are clear bugs here - and sadly they seem to be in
the deco calculations, as with the example given the ceiling that is
calculated makes no sense. When displayed in smooth mode it has very
strange jumps up and down that I wouldn't expect. For example with GF
35/75 (the default) the deco ceiling when looking at the simulated dive
jumps from 16m back up to 13m around 14:10 into the dive. That seems very
odd.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This also initializes the N2 tissue saturations to correct numbers
(setting them to zero was clearly silly).
With this commit we walk back in the dive_table until we find a surface
intervall that's longer than 48h. Or a dive that comes after the last one
we looked at; that would indicate that this is a divelist that contains
dives from multiple divers or dives that for other reasons are not
ordered. In a sane environment one would assume that the dives that need
to be taken into account when doing deco calculations are organized as one
trip in the XML file and so this logic should work.
One major downside of the current implementation is that we recalculate
everything whenever the plot_info is recreated - which happens quite
frequently, for example when resizing the window or even when we go into
loup mode. While this isn't all that compute intensive, this is an utter
waste and we should at least cache the saturation inherited from previous
dives (and clear that number when the selected dive changes). We don't
want to cache all of it as the recreation of the plot_info may be
triggered by the user changing equipment (and most importantly, gasmix)
information. In that case the deco data for this dive does indeed have to
be recreated. But without changing the current dive the saturation after
the last surface intervall should stay the same.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This commit steals the cursor up and down keys away from gtk so regardless
where gtk thinks the focus may be, we can still use the keys to change
between dives.
In the current UI design where all editing happens in separate windows
this works as expected, as we only grab the keys for the main window. If
we manage to re-enable in-place editing then we need to make sure that
this doesn't cause problems (as gtk uses up/down for the ability to change
drop down selections in combo boxes or values in spin buttons. So we must
make sure that we stop stealing these keys once we start editing something
(in which case simply switching to the next/prev dive wouldn't be a good
thing, anyway).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Prior to this commit, gtk often decided to collapse the trip with the
selected dive after the user imported or downloaded additional dives.
Since Subsurface tracks dives as being selected even after gtk collapses a
trip (which clears all selection state as far as gtk is concerned) this
could lead to the strange situation that the user could click on a new
dive to select it without unselecting the already selected dive - and
suddenly edit or delete did things that were entirely unwanted.
With this change we explicitly save and then restore the tree state around
import and download operations. This ensures that the same dive(s) stay
selected and trips stay expanded and therefore avoids the issues described
here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the ability to auto create trips from the menu. It's a toggle
entry (and while at it, we made the zoom toggle a toggle entry as well).
We can therfore switch back and forth between auto generated trips.
There is one bug. Assume you have no trips. You manually create a trip
from some dives out of a group of trips that autogen would turn into a
trip. Now you turn on autogen and this trip gets expanded with all the
dives that would normally be grouped together. If you turn off autogen
again, all those dives are still part of the remaining (initially manually
created) trip. Working around this issue seemed a lot more work than the
likelihood of anyone running into it seemed worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also fixed minor coding style issues (prevent useless code from being
executed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Track whether things changed in the global dive_list
So far this actually works if changing dive info (but only if dive
selected was changed after the dive info was changed).
We are not tracking changes to the cylinder information, yet.
also remove the duplicate static dive_list
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The following are UI toolkit specific:
gtk-gui.c - overall layout, main window of the UI
divelist.c - list of dives subsurface maintains
equipment.c - equipment / tank information for each dive
info.c - detailed dive info
print.c - printing
The rest is independent of the UI:
main.c i - program frame
dive.c i - creates and maintaines the internal dive list structure
libdivecomputer.c
uemis.c
parse-xml.c
save-xml.c - interface with dive computers and the XML files
profile.c - creates the data for the profile and draws it using cairo
This commit should contain NO functional changes, just moving code around
and a couple of minor abstractions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Passing it around is just annoying, and we only ever have one. Let's
not burden all the users with the silly thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's not repeat the boiler-plate code more than necessary.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This flushes the dive changes to the dive list, the way the old dive
info frame would update as you update dive fields.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sure, it's visible elsewhere, but this way you can search and sort for
it, and see several entries at once. So again, having it visible in the
dive list is a good thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This doesn't really fill them, it just adds them to the possible
entries. I'll get to it later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
So this actually reports the dive data that libdivecomputer generates.
It doesn't import special events etc, but neither do we for the xml
importer.
It is also slow as heck, since it doesn't try to do the "hey, I already
have this dive" logic and always imports everything, but the basics are
definitely there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we change units, we need to flush any currently active dive
information in the old units, and then carefully reload it in the new
units.
Otherwise crazy stuff happens - like having current cylinder working
pressure values that are in PSI because that *used* to be the output
unit, but then interpreting those values as BAR, because we changed the
units.
Also, since we now properly import working pressure from Diving Log,
stop importing the (useless) cylinder description. The Diving Log
cylinder descriptions are things like "Alu" or "Steel". We're better
off just making up our own.
Finally, since Diving Log has cylinder size in metric, make sure that we
do the "match standard cylinder sizes" *after* we've done all the
cylinder size conversions to proper units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Just iterate over the dive list entries, updating them one by one.
This avoids the "selection destroyed" when the dive units are changed.
And it's cleaner anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We will need the column information in order to update the naming when
the units change.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
used it as a pointer (their was no real reason), but I'm not really satisfied.
Signed-off-by: Nathan Samson <nathansamson@gmail.com>
|
Dirk Hohndel
Linus Torvalds
Nathan Samson