| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise every recalculation will continue to incorrectly increase the
deco gas used value.
Fixes #598
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the worst gase you have to provide gas for your buddy during all the
ascent. So you should have the amount of gas used in ascent as a reserve.
This patch makes the planner notes display that value separately.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Spin boxes for pO2 are now hooked up to preference values. Adding new
cylinders (or changing their fo2) computes the MOD accordin to the current
value of decopo2. Note that chaning the limits for deco pO2 does _not_
automatically update the switch depth of all cylinders as those might have
been manually entered.
Furthermore, MOD has now to option of rounding to multiples of a given
depth. That is used for the automatic switch depth which are now always
multiples of 3m (so that EAN50 is switched to at 21m rather than 22m).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #562
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also make gasname() and get_gas_string() global functions (which allows us
to delete code elsewhere).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We tracked gas used by simulating a dive with a cylinder - but for that we
need a cylinder size and working pressure. If the user just enters a gas
but no cylinder data (likely in order to figure out how much gas is used
so that she then can pick a big enough cylinder), we didn't show any gas
consumption.
It kinda sucks to add another member to the cylinder structure, but this
seemed far more reasonable then some other, global structure that
independently tracks gas usage. This just seemed to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When copying cylinders from an existing dive, the mod of the cylinder
might not be set. Assume a conservative 1.4 pO2 and fill in those data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is based on Linus' idea on the mailing list.
Treat NULL strings and empty strings as identical.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #377
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There's lots more stuff that can go.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Most of this is Gtk related, some of it is helpers that we don't need
anymore. I love the diffstat.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This compiles and looks about right, but it doesn't appear to work, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #191 on the bug tracker list
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having the tank_info declared in models.cpp seemed unintuitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The UI had only stubbed this code out. This adds the implementation of the
helpers and calls them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Plus a couple of minor formatting changes
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If mbar = 0 then *p would not be set, but the variable was then used in
the calling function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Doing this on Arch Linux with gcc 4.8.0 helped find one real bug.
The rest are simply changes to make static functions externally visible
(as they are kept around to eventually become helpers used by Qt) which
for now avoids the warnings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- rip all Gtk code from qt-gui.cpp
- don't compile Gtk specific files
- don't link against Gtk libraries
- don't compile modules we don't use at all (yet)
- use #if USE_GTK_UI on the remaining files to disable Gtk related parts
- disable the non-functional Cochran support while I'm at it
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Added the code that will load and populate the Tank Info
ComboBox that`s used by the user to select the Cylinder
description.
Code curerntly implements more than the GTK version since
the GTK version of it was a plain-list, this one is a
table based model that can be used in ListViews ( like
we use now in the ComboBox ) but also in TableViews
( if there`s a need in the future to see everything
that`s catalogued in the Tank Info struct. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
1 - Open File already open files, it tries to not break the Gtk version,
but some methods on the GTK version still need to be called inside Qt
because the code is too tight-coupled.
2 - Close file already close files, same comments for the open file dialog
applies here.
3 - The code for adding new cylinders in the cylinder dialog is done,
already works and it's integrated with the system. There's a need to
implement the edit and delete now, but it will be easyer since I'm
starting to not get lost on the code.
4 - Some functions that were used to convert unities have been moved to
convert.h ( can be changed later, put there because it's easyer to
find something that converts in a convert.h =p ) because they were
static functions that operated in the GTK version but I need those
functions in the Qt version too.
[Dirk Hohndel: lots and lots of whitespace and coding style changes]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Create a little widget that lists all the gases / tanks we know about and
allow the user to pick one of them.
Turns out that add_event only added events at the end of the list - but we
treat that list as chronologically sorted. So I fixed that little
mis-feature as well.
This does raise the question whether we need the inverse operation
(removing a gas change). And if there are other things that we should be
able to manually edit, now that we have the infrastructure for this neat
little context menu...
See #60 -- this doesn't address all of the issues mentioned there, but at
least deals with the 'headline' of the feature request...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A couple of these could clearly cause a crash just like the one fixed by
commit 00865f5a1e1a ("equipment.c: Fix potential buffer overflow in
size_data_funct()").
One would append user input to fixed length buffer without checking.
We were hardcoding the (correct) max path length in macos.c - replaced by
the actual OS constant.
But the vast majority are just extremely generous guesses how long
localized strings could possibly be.
Yes, this commit is likely leaning towards overkill. But we have now been
bitten by buffer overflow crashes twice that were caused by localization,
so I tried to go through all of the code and identify every possible
buffer that could be affected by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
strcpy() with buffer[10], could overflow on most languages.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This all seems very strange forward.
The reason for the check whether the stats_w widget has been populated is
that at the very beginning, when the UI is still being assembled, a first
call to switch_page() happens as the notebook pages are assembled. At that
point the stats_w widget is still empty which tells us that we aren't
ready to display anything.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Mostly coding style and whitespace changes plus making lots of functions
static that have no need to be extern. This also helped find a bit of code
that is actually no longer used.
This should have absolutely no functional impact - all changes should be
purely cosmetic. But it removes a bunch of lines of code and makes the
rest easier to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This cleans up our handling of combo boxes and all the duplicated
completion logic, and simplifies the code.
In particular, we get rid of the deprecated GtkComboBoxEntry. While it
made some things easier, it made other things harder. Just using
GtkComboBox and setting that up correctly ends up being simpler, and
also makes the logic work with gtk-3.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This forces us to use the proper gtk accessor functions. It may not be
worth it if people actually do the Qt conversion, but if we want to try
gtk3 at some point, this might help.
This all came about because I was trying to explain on G+ what an
immense pain this all was to even figure out, if you don't actually know
gtk at all. Google and the gtk migration guide are almost useless, and
the gtk2 documentation itself actually uses the fields directly without
any accessor functions in several places.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch centralizes the definition for surface pressure, oxygen in
air, (re)defines all such values as plain integers and adapts calculations.
It eliminates 11 (!) occurrences of definitions for surface pressure and
also a few for oxygen in air.
It also rewrites the calculation for EAD, END and EADD using the new
definitons, harmonizing it for OC and CC and fixes a bug for EADD OC
calculation.
And finally it removes the unneeded variable entry_ead in gtk-gui.c.
Jan
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. and rename the badly named 'output_units/input_units' variables.
We used to have this confusing thing where we had two different units
(input vs output) that *look* like they are mirror images, but in fact
"output_units" was the user units, and "input_units" are the XML parsing
units.
So this renames them to be clearer. "output_units" is now just "units"
(it's the units a user would ever see), and "input_units" is now
"xml_parsing_units" and set by the XML file parsers to reflect the units
of the parsed file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now we can simply remember the state of all the preferences at the
beginning of preferences_dialog() and restore them if the user presses
'Cancel'.
Fixes #21
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we fill the cylinder information in an imperial unit world, a
working pressure of zero is a special case, and forces us to use the
actual physical size of the cylinder in liter, despite the fact that
we normally would use cuft.
However, we compare that value against zero in a 'double', and in
between going through the gtk spinbutton logic, the zero we have
filled in then gets read out as some very tiny epsilon value from the
gtk spinbuttons (typically in the 10**-317 range). This causes us to
think that the zero isn't actually a zero, because gtk has done odd
things with it.
Fix this by calculating the millibar value (as an integer) first, and
check that *integer* against zero. Any crazy epsilon values will have
been rounded away, and our logic works again.
There's a good reason why subsurface does everything using integers
(ie the afore-mentioned "convert to integer millibar" etc) and doesn't
use floating point for any core data structures, only for conversion.
FP rounding and inexact behavior can be really subtle.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The buttons didn't actually do anything when clicked, but this still
was inconsistent behavior.
Reported-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Originally I used the colloquial term "bar" for the weight bar that you
can attach to a backplate (usually when diving twins in a tec
environment). This of course causes an odditity for translations as this
word "bar" is a homonym for the weight system and the pressure unit -
which throws off translations.
Instead of switching to a context-based translation I instead went with a
better term: "backplate weight". This of course now needs to be
translated, so I updated the .po files (and added German translations for
the two flavors of German).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- fix two missing strings in equipment.c (thanks to Tommi Saviranta for
pointing this out)
- add context for the translations of the Yearly/monthly statistics. The code
for this ended up being incredibly ugly, but the gettext infrastructure
really clashed with the way this is implemented. What I have now at least
works (tested with the German translation)
- merge the new strings into all the po files. The non-German translations need
to be updated. Make sure you remove the "# , fuzzy" lines or the current
Makefile will ignore those additions.
- some minor cleanup of the po files (many listed the wrong language, all of
them copied my incorrect use of PACKAGE (instead of saying "Subsurface").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is just the first step - convert the string literals, try to catch
all the places where this isn't possible and the program needs to convert
string constants at runtime (those are the N_ macros).
Add a very rough first German localization so I can at least test what I
have done. Seriously, I have never used a localized OS, so I am certain
that I have many of the 'standard' translations wrong. Someone please take
over :-)
Major issues with this:
- right now it hardcodes the search path for the message catalog to be
./locale - that's of course bogus, but it works well while doing initial
testing. Once the tooling support is there we just should use the OS
default.
- even though de_DE defaults to ISO-8859-15 (or ISO-8859-1 - the internets
can't seem to agree) I went with UTF-8 as that is what Gtk appears to
want to use internally. ISO-8859-15 encoded .mo files create funny
looking artefacts instead of Umlaute.
- no support at all in the Makefile - I was hoping someone with more
experience in how to best set this up would contribute a good set of
Makefile rules - likely this will help fix the first issue in that it
will also install the .mo file(s) in the correct place(s)
For now simply run
msgfmt -c -o subsurface.mo deutsch.po
to create the subsurface.mo file and then move it to
./locale/de_DE.UTF-8/LC_MESSAGES/subsurface.mo
If you make changes to the sources and need to add new strings to be
translated, this is what seems to work (again, should be tooled through
the Makefile):
xgettext -o subsurface-new.pot -s -k_ -kN_ --add-comments="++GETTEXT" *.c
msgmerge -s -U po/deutsch.po subsurface-new.pot
If you do this PLEASE do one commit that just has the new msgid as
changes in line numbers create a TON of diff-noise. Do changes to
translations in a SEPARATE commit.
- no testing at all on Windows or Mac
It builds on Windows :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Robert C. Helling
Joakim Bygdell
Henrik Brautaset Aronsen
Anton Lundin
Tim Wootton
Benjamin
Tomaz Canabrava
Lubomir I. Ivanov
Linus Torvalds
Jan Schubert