| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Test cases require deterministic results and thus we should allow uuid
to be specified when needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That one should have been quite obvious.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove several very noise messages on dive site handling (this seems to
work well now, so I think we can remove most of them - a couple were left
that indicate actual issues).
And also remove all the calls to "translate" when outputting data to
stderr. Error messages that indicate issues where the user will basically
have to come and ask the developers for help shouldn't be localized. They
should be in English to make it easier for us to figure out what's going
on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This avoids confusion and namespace collisions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This also supports the cloud storage, of course.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise reading in the dive site uuids will break on 32bit machines (as
all values >= 0x80000000 will be truncated to LONG_MAX).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Free memory returned from parse_mkvi_value()
Free memory returned from printGPSCoords()
Free memory allocated in added_list and removed_list
Free memory allocated when adding suffix to dive site name
Free memory allocated in cache_deco_state()
Free memory allocated in build_filename()
Free memory allocated in get_utf8()
Free memory allocated in alloc_dive()
Free memory allocated as cache but never used
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Returning 0 implies success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The interesting challenge here is what to do with the picture data stored
in the git repository. If the pictures are already in the file system (for
example because Subsurface is runnin on the same machine that this data
file was saved on) it would be silly to extract them again every time the
dive log is opened.
So instead we try to figure out if the pictures can be located and only
create local copies of them if that isn't the case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I found another place where we had colons in file names...
This fixes a small cut and paste error in an error message as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add infrastructure and helper functions to track minimum datafile version.
To make this information useful we need to keep the XML and git data
format versions in track moving forward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We used to use [[yyyy-]mm-]nn-ddd-hh:mm:ss[~hex] in our git storage format
for directory that contained dives. Problem with the is that on Windows
the colon ':' is an illegal character in a filename. So libgit2 refuses to
clone such a repository on Windows.
So instead we now always write dive directories in git repositories as
[[yyyy-]mm-]nn-ddd-hh=mm=ss[~hex] which replaces the ':' with an '='.
Of course we load / parse both formats so that older formats still work.
The next time they are written all the names change which causes rather
huge commits, but that's the only way I see for cloud storage to work on
Windows.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Save and load a usually unused copy of the preferences with the units that
were active the last time the dive list was saved to git storage (this
isn't used in XML files); storing the unit preferences in the data file is
usually pointless (that's a setting of the software, not a property of the
data), but it's a great hint of what the user might expect to see when
creating a backend service that visualizes the dive list without
Subsurface running - so this is basically a functionality for the core
library that Subsurface itself doesn't use but that another consumer of
the library (like an HTML exporter) will need.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also change the name of the enum and make sure all the inner functions get
passed the remote transport information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let's be consistent and avoid potential future bugs.
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When reading a v2 XML or git divelog it can happen that we get multiple
names for the same GPS fix or multiple GPS fixes for the same name. We'll
still consolidate them to one entry, but we should not throw away the
conflicting information - instead we should just add this to the notes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fix broken helper function, move helper functions into the .c file (there
really wasn't a good reason for these to be inline), fix the logic that
decides if we want to create a new dive site or use an existing one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Clearly didn't test that part well enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Update the version to 3.
Continue to read version 2 files and create dive sites on the fly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... and repair a failed rebase (sorry).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch privides for writing CCR dive log parameters to a git
repository and for reading the data back from a git repository.
This involves writing and reading the following members of the
structures of sample:
o2sensor[3]
o2cylinderpressure
and dc->no_o2sensors.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Oddly we already had code to load this from XML, but nothing else.
This makes the load from XML work like the rest of our code and adds the
save to XML plus the load and save for the git format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The latest CCR patches had rendered the planner not usable for CCR dives.
This patch corrects this (and reenables the CCR set point column for
segments). The problem was that a new member setpoint of struct divepoint
had been introduced, but there was already po2 which had the same meaning.
This patch merges the two and renames them setpoint to prevent future
confusion.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since earlier have we had support for our own calculated TTS. This adds
support for holding TTS values reported by a dive computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the loading of picture data from git repositories too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't save the dive computer timestamp and duration if they match the
dive timestamp and duration. But that means that on loading, we need to
default the dive computer time/duration to the dive one. If they
differ, the loading of the divecomputer file will then override the
default timestamp/duration.
This mainly matters if a later dive merge then changes the timestamp of
the dive: the dive computer timestamp needs to have been set correctly
and not change.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should make git loading be able to load git saves with arbitrary
weekday names. Even strange German ones.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The userid of Subsurface Webservice can be included in locally saved xml
files and git repository.
For xml files, it is stored in userid tag. For git repo, it is stored
in 00-Subsurface file present in the repo.
Preference dialog and webservice dialog modified to include option
for saving userid locally.
In case of difference in default userid and userid in local file,
some semantics are followed. These can be referred to here:
http://lists.hohndel.org/pipermail/subsurface/2014-April/011422.html
Fixes #473
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes "is_git_repository()" return non-NULL for all file names that
match the git name pattern, even if we don't find an actual git
repository there. That way, we won't fall back to writing out an XML
file with an odd filename.
If there is no actual git repository, we return a special invalid dummy
pointer, and then the git reading and writing routines will catch it and
return the appropriate error.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Commit 13e2210d75bb ("Allow remote branch names when reading a git
object tree") made it possible to read (but not write) remote branches,
which is very convenient when you just want to look at somebody elses
dives in a shared repository.
However, it was really quite stupidly done - both overly complicated,
and overly restrictive.
It's much better and simpler to just allow general git revision
specifications, which includes branches (both remote and local) as a
simple case, but also allows general git revision expressions. So you
can tag things, and use a tag-name instead. Or you can say that you
want to look at the previous save, by using the "branchname^" syntax.
Or, you can use the git reflog, and do things like
subsurface ~/scuba/[linus@{two.days.ago}]
to see the dives that your repository contained two days ago.
Obviously, you will not be able to save to this kind of ref-spec (and I
really will have to make error handling work better), but for browsing
state it's quite useful.
And in git terms, this is actually simpler than the "lets try to first
see if we have a local branch of that name, and then if we have a remote
one", as shown by the fact that this removes more lines than it adds.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes subsurface remember the git source commit of the dive data.
If you save to an existing branch, subsurface will now complain and
refuse to save if you try to save if the existing branch is not related
to the original source. That would destroy the history of the dive
data, which in turn would make it impossible to do sane merging of the
data.
If you save to a new branch, it will see if the previous parent commit
is known in the repository you are saving to, and will save parenthood
information if so. Otherwise it will save it as a new parentless commit
("root commit" in git parlance).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is the quick hack to read from a remote branch, which allows you to
look at other peoples branches when sharing a git tree.
Note that the "remote" part of "remote branch" is the _git_ meaning of a
remote branch: it is the local cached copy from a remote. This does not
imply any kind of network traffic - but if you have done a "git fetch"
to get branches from some other source, you can now use the remote
branch-name to see them in subsurface.
Also notice that you should *NOT* save the end result. It will "work",
but it won't do what you think it does. Saving does not update the
remote branch, it would create a new *local* branch with that same
branch-name, and since it's a new branch, it would do so with no
parenthood information. So you'll be very very confused.
I think I'll add code to remember the parent when loading from a git
repository, and then use that remembered information when saving. So
then you could create a real local branch with real history. But that's
an independent issue from this loading case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead, just encode the git repository information in the filename.
We want to make it much harder to make it match a real filename, but to
still allow easy browsing with the file manager interface. So the git
repository "filename" format is the path to the git repository
directory, with the branch name encoded as "[branch]" at the end rather
than the "path:branch" format that we used in the descriptor file.
[ For example, on Windows, a filename like "c:\my.xml" could be
interpreted as the branchame "\my.xml" in the repository in the
directory "c" ]
In particular, with this model, no filename that ends with ".xml" could
possibly ever be considered a git repository name, since the last
character of a git pathname is always ']'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't actually much use the trip list any more, and it's possible we
should simply get rid of it. I hadn't added the trips to the trip list
when loading them, and everything worked fine.
Well, *almost* everything worked fine.
There is one use of the list of trips, and that's the "clear the trip
index for each trip before saving them". That literally seems to be the
only non-debug use of this list, but when we didn't add the trips to the
list, the trip index never got cleared before saving trips.
And even that is unnoticeable for the *first* save event, because the
trip index will have been clear before that.
But on the *second* save event, if the trip index doesn't get cleared
before saving, the saving code will look at the index, say "Hey, I
already saved this" and skip the trip.
So if you loaded the trips from a git repository, and then saved things,
everything worked fine. But it you saved things a *second* time,
nothing would get saved at all, because all the trips were marked as
saved already.
Anyway, I think the real solution is to get rid of the pointless trip
list, and just use "for_each_dive()" to find all the trips, since that
list clearly is just more pain than gain. But in the meantime, this
makes the git loading add the trips properly to the list.
Signed-off-by: Linus "oops" Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
s could be used without being set.
Also convert the file to utf-8 - for some reason it was created as
iso8859.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While 100 was almost certainly long enough for all the non-string data
that we'd find on a single line, it was a little too close for comfort.
So let's go total overkill and not worry about it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simple oversight on the reading side.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was the final piece we didn't read. I can now read my XML file,
write it to a git repository, read it back, and write it to a new XML
file, and the final XML file is bit-for-bit identical with the original
one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes us parse everything we save, and I can load my XML file, save
it as a git file, load that git file, save it as a new XML file, and the
end result is identical.
Well... *ALMOST* identical. We currently don't save the dive computer
nickname and serial/firmware information in the git repository, so that
does get lost in translation. But all the actual dive data is there.
NOTE! I have currently only worked with my own dive files. They are
reasonably complex and complete, and do have a lot of the interesting
cases covered (like multiple dive computers etc), but there's no CCR
information, and all the dives are in trips, so this does need more
testing. It's at the very least very close.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes the sample parsing helper function for key-value pair parsing
more generic, and uses it for parsing cylinders and weightsystems too.
Events still to go, and then we have the "setting" section (for dive
computer nicknames and firmware information) that we don't actually save
yet in the git format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This gets us the stopdepth, cns, bearing etc information. We're getting
really close to parsing everything, but are still missing event parsing,
and cylinder/weight data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This doesn't yet parse the (less common) "key=value" type sample data,
so it's not complete, but the framework for that is in place too.
With this, we now parse all the basics, and the most noticeable missing
part is the cylinder and weigthsystem data. Lack of cylinder data in
particular means that SAC-rates etc don't get calculated, but other than
that it looks almost complete - you don't miss the missing event and
sample details unless you look for them.
I'll get the missing pieces done too, but this basic sample parsing was
visually a big step.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Salvador Cuñat
Miika Turkia
Dirk Hohndel
Marcos CARDINOT
Robert C. Helling
willem ferguson
Linus Torvalds
Anton Lundin
Venkatesh Shukla