| Age | Commit message (Collapse) | Author |
|---|
|
Since "struct dive_site *" is now a Q_METATYPE, the functions
MapWidgetHelper::centerOnDiveSite() and ::getCoordinates()
can directly get such a pointer instead of a QVariant. This
makes the code nicer to read.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
MapWidgetHelper::reloadMapLocations() used an array of uuids to
add dive sites to the map only once. Replace this by an array
of pointers. This is a small piece of a larger effort to remove
dive site UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace UUIDs by pointers to dive-site in mobile code. In both
cases, the value is transported via a QVariant. The function
getCoordinatesForUUID(), which was only used from mobile, can
be replaced by a getCoordinatesFor() function taking a variant
supposed to contain a dive-site pointer. Likewise, the variant
of the centerOnDiveSite function is now supposed to wrap a
pointer-to-divesite.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There are two updateDiveSiteCoordinates() member-functions, viz.
in MapWidget and MapWidgetHelper. Adapt them to take a pointer
to dive_site instead of a UUID. This is part of an effort to
replace UUIDs by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace the uuid argument to MapWidgetHelper::enterEditMode() by a
pointer. Likewise, adapt the only caller prepareForGetDiveCoordinates().
This is a small step in a bigger effort to replace dive-site UUIDs
by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 0aef04352a3210a6024f860758af466ea774dd5e made it impossible
to move new dive sites on the map. When entering dive-site-edit mode,
the filter would be instructed to show only dives of the corresponding
dive site [which didn't yet exist] and therefore all dive sites
on the map were deselected.
Fix this by explicitly centering on the dive site to be edited in
MapWidgetHelper::enterEditMode().
Fixes #1809
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
MapWidgetHelper::reloadMapLocations() reloads all dive flags
of the non-hidden dives plus the one of the currently edited
dive. Use the current_dive macro to determine whether this
is the current dive site instead of the global displayed_dive_site
object.
This is part of a series of commits, which makes the map-code
independent of the global displayed_dive_site object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of reading out the global object "displayed_dive_site",
pass the dive site to be edited in arguments to
prepareForGetDiveCoordinates() and enter edit mode.
Simplify the code in LocationInformationWidget by not using
signals to call the prepareForGetDiveCoordinates() function.
While doing this, collect common code in accept() and reject()
in the already existing resetState() function.
This is another entry in a series of commits that makes
data-flow more clear by removing access to the global
"displayed_dive_site" object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The setEditMode(bool) function behaves very differently, when
entering and exiting edit mode. Therefore, split it in two
versions. This will allow to pass arguments that make sense
only when entering the edit mode.
Since setEditMode() doesn't exist anymore, turn the editMode
Q_PROPERTY line to the MEMBER version. Accordingly, remove
the reader function. If QML wants to enter edit mode, it
should invoke the appropriate function and not simply set
the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The coordinates of a "dragged flag" were passed out-of-bound via
the global "displayed_dive_site" object and then a signal was sent
to notify of the changed coordinates.
Instead, pass the coordinates directly via the signal. This makes
the data- and control-flow more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was used by LocationInformationWidget to instruct the map
that the coordinates of the current dive site has changed.
There is no reason why this couldn't be a function call, as no
other object ever connect()s to this signal. In fact, such a
function already exists viz. updateLocationOnMap.
Therefore, replace the signal by a simple function call.
Moreover, the uuid and coordinates of the dive site were transported
via the global "displayed_dive_site" object. Instead, pass this
information in the parameters of the function. This makes it
easier to reason about data- and control-flow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The dive site list was connected to centerOnDiveSite(). Apparently,
the currently selected dive site should have been shown in the map.
Yet, this never worked, because the actual dive site of the selected
dive had precedence in centerOnDiveSite().
It seems that centerOnDiveSite() had actually to purposes:
1) center on the passed in dive site
2) center on the dive sites of the selected dives
Therefore, split this function in two separate functions for
each of these use-cases. This allows us to remove some pre-processor
magic (mobile vs. desktop) and to remove a parameter from the
MainTab::diveSiteChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If the dive list is filtered the map should hide dive locations
that do not match the dive list filter.
To achieve that, loop over dives instead of dive sites in
MapWidgetHelper::reloadMapLocations() and discard
dives that are hidden by the filter. Then check if a dive
has a dive site attached to it and re-use the old functionality.
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Make map-widget self contained, with its own qrc file.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Of course, quite a few of them indirectly get it through other header
files.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
qmlimportscanner for some reason does not include
the googlemaps plugin in the generated file.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
|
|
centerOnLocationHard() is added in MapPage.qml so that
on `firstRun` the map is hard panned to the desired location
without animation.
This affects the selection of a new "Dive details" -> "Map it" or
when opening a GPS location in the map.
The idea behind this change is to avoid starting the map animation
from an arbitrary location such as [0,0] or London. Also, to not
start the map zoomed out completely and then zoom in on a selected
dive.
For this change to work, add the helper getCoordinatesForUUID()
to qmlmapwidgethelper.cpp/.h and use it to obtain the
QGeoCoordinates for a dive site UUID.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The first 3 actions in the map widget context menu
are about the current map widget center and not about the
selected dive site / marker.
Avoid using the word "location" for these, use "coordinates"
for the second and third entry.
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Extend openLocationInGoogleMaps() so that the current
map widget zoom level is roughly mapped to the Google Maps
zoom level.
The two zoom scales are quite different. Google Maps uses meters
directly, while the QML map uses a scale from ~1 - 21.
The approximation is done via exponential regression over
a small data set gathered from experiment.
Add a console.log() call so that the URL is logged.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Make the map widget use a new URL format for Google Maps
in openLocationInGoogleMaps(). The new URL format does
not show a marker once the location is open in Google Maps
as this might confuse some users.
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The signal to emit is selectedDivesChanged() and it accepts
a list if diveIds. The 'nSelectedDives' counter is redundant.
Also expose the 'map' and 'mapHelper' objects as aliases.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The mobile version is limited as it does not support dive list
selection of multiple dives and editing multiple dives.
Also the dive list on mobile does not follow the same indexing as
the desktop version dive list.
Use the SUBSURFACE_MOBILE macro and for:
- centerOnDiveSite() either deselect map markers or center on
a single one (never on a rectangle like the desktop version)
- selectedLocationChanged() and selectVisibleLocations() return
a list of single dive ID
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
centerOnDiveSiteUUID() is a helper to center the map on a dive_site
UUID instead of a dive_site pointer.
Make it call centerOnDiveSite().
Make both this function and reloadMapLocations() Q_INVOKABLE
as these are going to be called from QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Add the following includes in the header -
<QVariant> and <QGeoCoordinate> otherwise the
mobile build fails.
It is unclear how the desktop build does not complain
about this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
CID: 208335
Mainly to silence Coverity, as I do not believe this caused
any problem.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
It shall match the Qt version ... according to Dirk.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
In commit f3d978b8a5fb6 the QtQuick version was upgraded
to 2.6 (from 2.0 for the mapwidget). This is, apparently,
too agressive, as there are still mainstream distributions
that are still on Qt 5.5.1 for which 2.6 of QtQuick is too
new. And as a sidenote: Qt 5.5.1 was released in October
2015.
So partially revert commit f3d978b8a5fb6.
Fixes: #978
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
This reverts commit 92e9c6606f6ef3ad16d2e31f9f9a8f5fa14f2c1a.
|
|
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
The centerOn*() functions can just return early
for invalid input, instead of branching the conditions.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
- Add the helper coordIsValid() and use it in centerOnCoordinate().
This checks for NaN coordinates and prevents an infinite while() loop.
- Use '-= 1.0' instead of '--' to be more clear that the decremented
variable is a float
- Store the current center with 'centerStored' in
centerOnCoordinate(). Fixes a possible zoom out glitch.
- use Math.floor() to convert 'zoomLevel' to integer when estimating
zoomOut in centerOn*()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The zoom out function is no longer used as we don't zoom
out when a dive doesn't have dive site coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
There was a problem with the current different duration
for pan and zoom. Ideally the pan should before the zoom:
Map zooms out -> pan to new center starts -> zoom in
The problem with this is that if the map pans out too much it
loses it's center and the above scheme would not work.
To solve the problem, make the duration of pan and zoom
the same this is not idea, but prevents the case where
the map would not zoom-in at the correct center.
Also remove the easing function.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
When the map is performing zoom/pan animation and the
user performs an action that would trigger a new zoom/pan
animation, but some glitches can occurs. An example
would be when one clicks a dive in the dive list -
the zoom/pan animation will trigger, so that the map
is centered on the dive site, but if the user clicks the
[+] button to zoom-in, while the animation is running
the map will glitch.
This patch prevents such glitches by stopping
all running animations in progress when the user:
- single clicks the map
- uses the mouse-wheel to zoom
- presses the [+] / [-] buttons
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Avoid using qvariant_cast() with getRole() in favor of
MapLocation::coordinate() in MapWidgetHelper::reloadMapLocations().
This makes the code more readble.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Once the user starts editing a dive site, make sure to pass
coordinates of either the current map center (if a new MapLocation
is being added) or the coordinates of the existing MapLocation.
The "Dive site management" coordinates text field would receive
these new coordinates after the displayed_dive_site struct
is updated and the coordinatesChanged() signal is emitted.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Once the user starts editing the coordinates by hand
(from the "Dive site management" UI) make sure to
update the map to center on those user entered
coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Upgrade QtQuick to 2.6. Seeing a small artifact in the application
header, lets see what happens when upgrading more includes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This patch allows updating the location of map markers
while editing a dive site and updating the text in the
LocationInformationWidget in real-time.
Currently it is only possible to see the marker changes by
clicking 'Apply'.
The modification required the following changes:
- add the MapWidget::updateCurrentDiveSiteCoordinatesToMap() slot
and call it each time the GPS text updates
- separate the updateCurrentDiveSiteCoordinates(FromMap/ToMap) logic
by having the FromMap/ToMap suffix to method names
- make MapWidgetHelper::updateCurrentDiveSiteCoordinatesToMap()
call a new MapLocationModel::updateMapLocationCoordinates()
method, which updates selected location coordinates and the model
- add MapLocation::setCoordinateNoEmit() that does not emit
a signal when updating a coordinate
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
When starting to edit a new dive location, create
a marker at the current map center instead of zooming
out and centering on the 0,0 coordinate.
This will help (and speed up) a lot the edition,
if the user needs to add numerous dive markers
at a specific location close to each other.
refs #754
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Move all the map widget platform agnostic files to the
<subsurface-root>/map-widget folder.
This avoids the confusion about the desktop version of subsurface
using mobile components. The map widget is planned as a shared
component between the mobile and desktop versions.
desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific
to the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
Berthold Stoeger
Linus Torvalds
Lubomir I. Ivanov
jan Iversen
Dirk Hohndel
Murillo Bernardes
Jan Mulder
Martin Měřinský