| Age | Commit message (Collapse) | Author |
|---|
|
This is mainly a cosmetic improvement. The GPS menu stayed
visible, when selecting most of the options. This looks weird,
as the close of the menu is also an indication of the selected
action carried out. So, just close it
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Navigating using the breadcrumb in the header did leave the
dive detail edit (and add) mode in such a way that (for example)
navigation in the dive list was suspended. Obviously, it is
debatable what should be done. Saving the edits/add, or
cancelling them. For now, this commit cancels them
silently. This is the exact same thing that is happening when
the user selects the dive list from the drawer menu.
Fixes: #932
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
When editing (or adding) a dive, the internal data containing the
attributes on the edit page was not cleared when editing was
finished (in any way, by saving the edit or by cancelling it).
As long as the user only edits existing dives, all this poses
no problem, as at the start of a dive edit, the data is filled
from the dive to be edited. However, when adding a dive, data
coming from previous edits shows up. This not clearing data
also causes the strange effect as written in issue #950: adding
a dive, deleting it, and adding a dive again, added the first
added dive data, without the edit screen being shown.
All this can be solved by clearing the data from the edit when
editing is done.
Fixes: #950
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Trivial fix. Show the message "Turning off automatic
sync to cloud ..." when turning automatic sync to offline. Just
a more logical moment to show this message. Also rephrase the
message "Enable auto sync" to "Auto sync enabled". It shows
a status, and not an action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Set download srceen in a sane state after a previous download
session using this screen. The erroneous behavior was very
similar to the one fixed in commit 7fe9bbe295dcf92. For example,
download some dives, quit the screen, go back, and the bottom
buttons are still selectable.
This commit resets some values when leaving the download screen
(ie. not only swiping it away), so that it looks sane at a next
visit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Reset the Retry button on exit of the Download from divecomputer
page. So, it it not reset wehen swiping this page away, or
cancelling a running download, but resetting it on accepting
downloaded dives.
As we do not have real error reporting (from download failures),
this all is a little arbitrary. Another "fix" could be, not
changing the button text at all.
Further notice, this is not specific iOS, but also Android.
Fixes: #895
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
While the autocomplete function only works for the first entry
adding multiple comma separated buddies can still be done.
Fixes #608
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
|
|
Show them left of address (so they are in the user's view) rather
than on the right.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
I consider it more natural for example for the GPS menu
to stay open when an action is clicked. So this turns off
the general close but has to trigger it on individual items.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Sorry, this introduces a new string...
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
|
|
on iOS the address we display on Connection is an UUID, not
a physical address.
This change the pattern (on iOS) used to enable bluetooth_mode.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
|
|
When the user entered a dive site using autocompletion, it
is a known site, of which we might have a GPS location already.
Just fill the known site coordinates.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Add the capability to select the location name from a list, constructed
from the known dive sites in the logbook.
Fixes: #546
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
And again, no visual changes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Tested fine without visual changes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Upgrade QtQuick to 2.6. Seeing a small artifact in the application
header, lets see what happens when upgrading more includes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
When first tested this commit, especially the dive list was looking
terrible. However, after including newer SHA's from libkirigami, and
correcting lots of spacing/margin issue, a retest of this commit shows
no strange artifact any more, and the amount of warnings in the log
output is reduced significantly. So now, it appears save to
upgrade.
Notice that main.qml still uses Kirigami 2.0. and is not updated in
this commit. With version 2.2, there is a new way of theming, that
is not (yet) compatible with our current code. Blindly upgrading to
2.2 leads to a almost black dive list, wrong button colors, and
runtime errors in the log, due to the fact the direct setting from
QML Kirigami's Theme colors is not allowed any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Move all the map widget platform agnostic files to the
<subsurface-root>/map-widget folder.
This avoids the confusion about the desktop version of subsurface
using mobile components. The map widget is planned as a shared
component between the mobile and desktop versions.
desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific
to the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
In commit bdf6dc78281bec2, we pulled in some changes from Kirigami.
I checked all the new commits and they seemed just fine, and a
test (on desktop) on both Qt 5.9.1. and 5.9.2 showed no obvious
problems.
However, some time later, working on something else, I compiled
from Android to test, and saw some strange behavior in the dive
list. The topmost dive is partially hidden behind the application
header on startup of the app, but can be pulled down. Not a big
deal, but is does not look right.
After tedious testing, bisecting, etc, I found commit
d0f3941a4d7f4d4c6 in Kirigami (obviosuly, it was not clear from
the start that it was in Kirigami, as I could well have been
some error in Subsurface, or even Qt). Mentioned commit is
trivial, and handles with the wideScreen property of the
application window. With wideScreen = false, the bug is
visible, when true the bug is gone.
This all said. Just set the wideScreen to true, which can
definitely be considered a workaround. I exspect that this
commit can be reverted later on when Kirigami is fixed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
While testing the mobile app on Qt 5.9.2, I encounted a show stopping
issue. Select a dive in the dive list, go back to the dive list (as
selecting a dive opens the details), now scroll down to a different
dive, and select one. The app starts enumerating (moved smoothly
according to the specs) all the dives between the old and the new
selected dive. So, depending on the distance, this could take forever.
Explicitly: on 5.9.2. only.
From the Qt docs:
highlightFollowsCurrentItem : bool
If this property is true (the default value), the highlight is moved
smoothly to follow the current item. Otherwise, the highlight is not
moved by the view, and any movement must be implemented by the highlight.
End Qt docs.
Setting this property to false solves the issue. Tested on both Qt 5.9.1
and 5.9.2.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
The 'isReady' boolean flag is now set to 'true' only
once the Component.onCompleted slot is reached.
The flag is then used as a safe-guard in the
onZoomLevelChanged slot. Calculate the small circle radius
(mapHelper.calculateSmallCircleRadius()) only if 'isReady'
is set to true.
Prevents a crash if the Map widget is not ready, yet a zoom
level is set via the 'zoomLevel' property. The crash happens
because mapHelper.calculateSmallCircleRadius() has a callback
to the Map component to estimate some points and distances of the
small circle.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Commit 344d9765936 resulted in the start of Subsurface with a map of
the whole world. The user has to zoom in (assuming the case that the
first selected dive has a position), in evenry session. This is solved
by setting the zoomlevel at startup at the default value. Ok, this
results in a map of central London, UK, when starting Subsurface with
a dive without location, but is this as good as any map.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
A not perfect improvement, but way better IMHO. Prevent the list of
downloaded dives to grow over the buttons at the bottom. Just a simple
change by adding a bottomMargin to the list.
Notice that there is still some overlap, but for now I consider this a
trade-off between the scarce screen real-estate and the wish to present
and much as possible dowloaded dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Trip headers spanning more than one line where broken at incorrect
locations in the string. Not exactly sure, but I think this came with
the newest Kirigami SHA, and especially the Label change.
Carefully reading the code for the trip heading shows a "strange"
negative margin. So the margin is on the outside. This margin was
used to split the string, allowing for a small invisible part of
the string to present as trip header.
This is solved by this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This does two main things to the map widget:
- if there are no coordinates, do *not* zoom out to the whole-world
view. Just leave the map alone.
- when zooming out to move to a new dive site, zoom back in to the same
zoom level it was before.
These two changes make it much more pleasant to move between dives,
particularly as you move back-and-forth without losing the zoom level.
NOTE! The zoom level gets reset if you move dives _while_ zooming is
happening, and so moving quickly between dives will still end up losing
the original zoom level, replacing it with a bigger zoom-out that was
active _during_ a previous zoom.
That could be seen as a feature (moving incrementally to an "overview"
zoom when moving quickly between dive sites), but honestly it smells
more like a bug to me. But regardless of that feature/bug, this new
zoom behavior is more pleasant than our older "always reset when
moving".
But it might be a matter of taste, so people should try this out and
comment.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation,org>
Cc: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Again, mostly related to label change. First, the top button was "glued"
to the top of the screen, so added a little margin there. It
appeared that all the other items on the screen (progressbar,
2 button rows, and the downloaded dive list) where not moving down
due to the add of that little top margin. This was solved by
anchor-ing the items together. Finally, the text of a downloaded
dive was on the top of the delegate lines. Not sure where that came
from, but easily solved by centering it explicitly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
As in a525fff1125, also the dive details top data was not nicely positioned
any more due to the deprecated and removed Kirigami.Label.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
The new SHA for Kirigami did all kinds of nasty things to our DiveList.
This commit tries to repair most of the damage. Nothing more than
some margins, anchors, and even a font that changed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Commit 8f6827ab122 brought a new SHA for Kirigami, but that introduces
a very noisy logging of "Kirigami.Label is deprecated. Use
QtQuickControls2.Label instead".
So, thats what done here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This is done so that a de-selected marker is better
distinguished from the selected marker.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The QML map uses MapItemView. MapItemView needs a delagate
in the form of a MapQuickItem. The MapQuickItem needs a
'sourceItem' which would be used as the visual (e.g. marker)
on the map.
If the root sourceItem is of type Item, the marker becomes
non-clickable. If the root sourceItem is an Image, the clicks
work.
This patch removes the root Item, which makes the code
less organized, but at the same time it fixes the bug.
Bug reproduced on the following Qt versions on Ubuntu:
5.5.x, 5.7.x
Bug cannot be reproduced on Qt 5.9.x on Windows.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This commit implements possible switching BT on and off during a session,
so not needing a restart of the app when the user forgot to switch
it on when starting the app.
For this, the following needed to be done: 1) create a handler that
reacts on local BT device status changes. 2) repopulate the connection
list in the download screen when a BT status change is detected.
Notice the subtile change of the Q_INVOKABLE btEnabled() function
to a Q_PROPERTY. This gives a nice dynamic behaviour when
switching BT on/off with the app open.
Fixes: #556
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the QML modules for QtLocation and QtPositioning are
missing the QML in mapwidget.cpp will fail to load,
which can lead to crashes.
To solve the issue check if the QML has loaded and set
a flag 'isReady' to true. If the loading has failed
load another QML which is for showing a red error text
in the lines of `MapWidget.qml failed to load!`.
If the map QML has failed, use a macro in all relevant
MapWidget members to turn them into a NOP. This approach
leaves the rest of the codebase intact - e.g. no checks
in classes which connect to the MapWidget class.
Fixes #596
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This commit is empty when shown with '-w' - it just updates the
indentation after commit c00804eff6 ("QML UI: always start edit at top
of page").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When starting to edit / add a dive, the Flickable needs to be positioned
at the top of the page, not the last position shown.
For clarity I'll do the re-indentation in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The hard switch was not ideal. This isn't perfect, yet, but a step in
the right direction. The 'transitions' to change the visibility
properties are a bit odd, but that's how it's done in the examples as
well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need a white path drawn on the dark action button, but a black path
drawn for the main menu.
(looks like a white space change snuck in here)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And have a tiny bit of space around it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way the accidental closing of the edit (and loss of data)
should no longer happen.
See: #495
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This used to work without manually adding space here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These changed in Kirigami.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This addresses some review comment on whitespace and translated
string formatting.
In the string formatting, a tiny additional change is made.
I wanted the email address in the explanation text in a bold
font. Using the HTML <b> for this, removed the /n newline
characters in the output. Apparantly, mixing these two
formatting styles does not work. No problem, replaced the
/n to HTML style too.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
Jan Mulder
Joakim Bygdell
Robert C. Helling
Murillo Bernardes
Lubomir I. Ivanov
Linus Torvalds
Dirk Hohndel