| Age | Commit message (Collapse) | Author |
|---|
|
That's consistent with how we do things on other pages.
Also hide the on-screen keyboard.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The hardcoded widths with fixed values was just flat our broken and
created all kinds of strange artifacts.
But even with this somewhat more idiomatic approach this still isn't
perfect - on wider screens it doesn't shrink back to the minimum column
width. But that seems like a bit of a corner case. Overall this feels
like a huge improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The number of possible sequences of events when the user is connecting a
USB device is rather surprising. These changes try to ensure that in
every case we get USB connection information we do in fact show the
correct (or best guess) connection.
See #2686
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was used very inconsistently and had more bugs than positive
impact.
See #2686
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems to make more sense than to not select anything (which was the
previous behavior).
If the same connection is still available, select it again. Otherwise
pick the top connection (which is the right thing to do if the user has
just plugged in a USB device and refreshes the list -- that device will
show up as top entry).
Based on a suggestion by Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user tries to download from a device that he hasn't given the app
permission to read from, Android will pop up a dialogue asking for that
permission. With this after giving the permission we continue (well,
technically, restart) the download which is likely the expected behavior.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The usbRescan() code is smart enough not to duplicate entries that might
already be there. And with this the user doesn't have to manually tap
rescan if they didn't open Subsurface-mobile via the intent after a
device was plugged in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way even if a USB device wasn't added through an Android intent, we
still have a way to scan for it and select it. This is especially
important in case a user has a cable that we haven't seen yet (i.e. with
a VID/PID that we haven't added to Subsurface-mobile), but that
nevertheless works with the android usb serial drivers.
This also makes the flow a little more logical / consistent when
deciding which connections to show.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This dive computer hasn't been supported on Android in quite a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we explicitly open the download page after the use plugged in a USB
device, don't try to use guesses from the BT/BLE pairings to populate
the device/connection dropdowns.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just removes broken code. That file select dialog is still just a very
strange idea and should be revisited at some point.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we are switching between pages, the whole opacity mechanics make no
sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was a merge error in the dive list rewrite and brought in a code block that
had moved, which caused issues with correctly switching to the dive list.
Calling setupActions() moves to the diveListView (where it really belongs).
Instead of messing with the visibility of components of the same page, we now
simply switch out the shown page.
Fixes #2667
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I will (mis)use these for moving dives out of trips and to the trip above or
below and of course for undo/redo. And the weirdest one is the 'local offer'
icon that seemed a reasonably good fit to edit trip details.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The logic when we show the save button is a little fragile (and visually I'm not
sure I love the disabled button), but hey, this works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For now this only shows the trip details. They can be edited on the page, but
there is no way to save those edits, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This doesn't show the dive specific actions and sets the stage for trip edit
actions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A dive that is already in a trip can directly be moved into the trip above or
below.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the ability to delete a dive and to show its location on the map
directly from the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way one can execute dive list manipulations without the detour
to the dive details screen. For example you can long-press on a dive and then
add it to a trip or remove it from a trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The default policy closes the context drawer if there is a button release
outside the context drawer area. That messes with the intended UI. For us a
much more useful behavior is to have the next click outside of the drawer close
the drawer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This one exposes undo/redo as well as some basic trip manipulations, very similar
to what's already available on the dive details page. Except that here it also
makes sense to add a selected dive to a trip above or below (if those exist and
the dive isn't already in a trip).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now this is only available on the DiveDetails screen. The menu entries
are only enabled if there is such a trip to add the dive to (and if the dive
isn't already part of a trip).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we remove the newest dive from its trip, it becomes inaccessible in the app,
but the dive data saved to disk appears to be correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In add and edit mode this is confusing and wrong.
There is a bug in Kirigami that creates lots of bogus error message about
missing mainFlickable. That needs to be patched out.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In some situations we ended up with the wrong location name. One way to
reproduce the problem was to edit an existing dive location to be a substring
of an existing location name. Save the dive, then immediately edit it again.
The wrong location would be filled in.
The code here looks strange and unnecessary, but it seems to fix the issue.
The aliases don't seem to make the code any easier to understand. This replaces
them in the case of the location combo box with direct accesses to the data on
the DiveDetailsEdit page. It may be worth removing all of them. The
locationModel alias was unused.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The undo and redo action actually work already.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we are using the existing command infrastructure, this isn't specific to
undoing a delete.
This commit renames the function and removes its use in the UI, the next commit
will then add the generic undo to the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is just pulling in the object so it can later be used on other pages.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the selection is now handled in the core this is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Selection is now be handled by the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Command that just swaps two dives. This is rather complex,
as for example a dive site might be created.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This still has an odd bug. When we swipe the dive details to change the
selected dive and that action causes a trip to expand or collapse, then
the color change / highlight in the dive list isn't updated correctly,
even though the log file indicates that we made the necessary changes.
This also changes the coloring of the selected dive; having the same coloring
as a trip was very confusing. This is a bit stark, but it clearly communicates
the distinction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That makes no sense anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of using the model, copy the code we have in the desktop version
which manually creates a 15m/40min dive and passes that to the addDive
undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The next dive is automatically shown anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After swiping through the dive list, select the currently visible dive.
Thus, the dive is highlighted in the overview pane.
The connection with the QMLManager feels atrocious, but I would prefer to have
as little logic in QML as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The core sets the current dive when undoing something.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The currently shown dive is now controlled by the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
MobileSwipeModel is probably not an ideal name, but all I could come up with.
One of the main complications here is that our list is reversed with respect to
the source model. We should change that one day. Probably by moving the
sorting down to the core-model.
Since looking up the source row is somewhat expensive, the lookup is cached for
a single entry because accesses come in bursts for a single dive. This should
be a good compromise and avoids keeping track of a full row-to-dive array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
To unify mobile and desktop, let's use the current_dive variable
of the core to indicate the current dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a small step in unifying mobile and desktop.
I'm unsure whether it is correct to play this via the QMLManager or whether we
should call form QML directly into the model?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This obviously breaks everything, but now we can start fixing
things.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This isn't perfect yet, but it looks fairly reasonable.
This commit was mainly written by Dirk, but includes a few fixes from Berthold
which where squashed into this commit as they really should have been part of
the initial version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Don't just pop the top page off the stack, but pop the download page.
Also explicitly switch to the dive list afterwards.
Additionally, fix a typo in the code that attempts to deal with the
shortcut buttons. I believe that right now this code is completely
broken, but while I contemplate how this should work, let's at least fix
the stupid typo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The order of execution of the various routines is a bit counter intuitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes the code easier to reuse and uses the helper we just added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And have the existing shortcut functions use that helper.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Berthold Stoeger