| Age | Commit message (Collapse) | Author |
|---|
|
Including the related tests.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is only needed to show the list of GPS fixes obtained with
the now removed location service.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Prior to this change, we had two different cylinder lists as models for
drop down boxes - one that prepends the "no default cylinder" entry
(which we need for setting up no default cylinder to be used in the
app), and another one that only includes actual cylinders.
The problem occured if a dive is created before the first time we edit
an existing dive: in this case we are applying indices across the two
models, but the indices are of course off by one; this results in
actually picking the wrong cylinder. So each time we try to edit a dive,
we end up with the previous cylinder in the list.
This commit simplifies the code by having only one place where we create
list of cylinder names (which is then used as the model for the combo
box). It also uses more logical names for the two 'flavors' of this list
to make it clear which one is supposed to be used (the regular list when
editing or adding dives, the one with the "no default cylinder" entry
prependet for the Settings page).
Reported-by: Brian Fransen
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We already showed the tags, but we didn't allow the user to edit them.
This tries hard not to create inconsistent or illogical tags by trimming
white space and being careful with how the tags are added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the mobile version we should always allow a little more wait time for
the cloud server - there just seem to be more issues with response times
on mobile devices, especially when in places with poor data reception
(which isn't uncommon for dive sites).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Thus, the membuffer data is automatically freed when going
out of scope - one thing less to worry about.
This fixes one use-after-free bug in uploadDiveLogsDE.cpp
and one extremely questionable practice in divetooltipitem.cpp:
The membuffer was a shared instance across all instances
of the DiveToolTipItem.
Remves unnecessary #include directives in files that didn't
even use membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The goal is to enable a user experiencing crashes when applying GPS data
to their dive log to make all necessary data available to the
developers. Hopefully the clipboard is large enough to hold all the
data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is fun... with just a tiny bit of 'magic text parsing' we can allow
the backend code to add a button to the notification that will open the
context menu that will make it super obvious to the user how they can
undo an operation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we save after every operation in the mobile app, this allows us to
tell the user what we actually saved - and we can remind the user that
they can undo/redo the last operation.
The code gets more complicated because in the case that the operation
that triggered this change was an undo, we need to show the redo text to
describe what we are saving, and must point the user to the redo
operation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This isn't really useful for normal users and with the new 'multiple
notifications stay visible' feature in Kirigami it creates a really
weird and distracting user experience.
We should show the user a summart of what we did instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order to get the undo stack information into the commit message, we
need to actually call Command::init() to set up the callback.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes it more obvious what we are doing. And won't make any difference
from a performance perspective.
Also converted the last call to connect using the old syntax to the new syntax.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply move the initialization of the logging function into its own method and
call that in the QMLManager constructor.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't want to connect to this until all parts of the QMLManager object are set up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of always showing info about the location, allow all data to be
captured in a more structured format - but only when the app is in
verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since switching to the mobile-models and removing grantlee,
DiveObjectHelper was demoted to a thin wrapper around string
formatting functions. The last user was removed in a previous
commit.
It was never a good idea, given QML's strange memory-management.
Let's remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When editing a dive, a DiveObjectHelper of the unmodified dive
was created to compare the edited with the old values. Since
the DiveObjectHelper is used here only as a pointless wrapper
around the formatting functions, call these functions directly.
However, note that the code is in principle wrong since the
change to the mobile-models, which do not use the DiveObjectHelper.
The real fix would be to reload the data from the model to prevent
going out-of-sync with respect to the formatting routines!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The list of known tank types were kept in a fixed size table.
Instead, use a dynamic table with our horrendous table macros.
This is more flexible and sensible.
While doing this, clean up the TankInfoModel, which was leaking
memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of programatically reload the completion models, listen
to the relevant signals in the models. To that goal, derive all
the models from a base class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
These flags are not dive-related, therefore move their declaration
to the appropriate header file. Likewise, move their definition
from parse-xml.c to subsurfacehelper.c
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Desktop does not use mark_divelist_changed() anymore - all is done
via the undo machinery. Therefore move this function (and its
counterpart unsaved_changes()) to qmlmanager.cpp.
Ultimately, it probably should be removed from there as well, but
currently I don't dare to touch all the cloud-logic!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In analogy to the xml-parser add a device-table to git's parser-state.
Currently this is unused. In upcoming commits the git parser will
then be changed to add device nodes in this table instead of the
global device table. The long-term goal being to detach the
parsers from global state and to make dive-import fully undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To include the device code in the undo system, we need functions
to check for the existence of devices and to add or remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If we want to avoid the parsers to directly modify global data,
we have to provide a device_table to parse into. This adds such
a state and the corresponding function parameters. However,
for now this is unused.
Adding new parameters is very painful and this commit shows that
we urgently need a "struct divelog" collecting all those tables!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We used a typedef "filter_preset_table_t" for the filter preset table,
because it is a "std::vector<filter_preset>". However, that is in
contrast to all the other global tables (dives, trips, sites) that we
have.
Therefore, turn this into a standard struct, which simply inherits
from "std::vector<filter_preset>". Note that while inheriting from
std::vector<> is generally not recommended, it is not a problem
here, because we don't modify it in any shape or form.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is mostly copy and paste of other git loading code. Sadly,
it adds a lot of state to the parser-state. I wish we could pass
different parser states to the parser_* functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is a bit painful: since we don't want to modify the filter
presets when the user imports (as opposed to opens) a log,
we have to provide a table where the parser stores the presets.
Calling the parser is getting quite unwieldy, since many tables
are passed. We probably should introduce a structure representing
a full log-book at one point, which collects all the things that
are saved to the log.
Apart from that, this is simply the counterpart to saving to XML.
The interpretation of the string data is performed by core
functions, not the parser itself to avoid code duplication with
the git parser.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Switch the mobile code to use the constraint-based filter. The one
thing that is still commented out is dive-site mode, since mobile
doesn't (yet) have a dive-site edit feature. And even if it had,
the dive list probably wouldn't be shown at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If the dive timestamp changes, the dive could move in the dive list. But the
current dive actually doesn't change (it's still the same dive, right?). Yet
we need to update the dive list as well as the shown dive (especially if this
is after adding a dive, which is first inserted with the current time and then
updated with whatever the user enters).
Fixes: #2971
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old code wasn't wrong, and likely the compiler turned this into something
that wasn't really terrible... but yeah, 5 unnecessary calls to a helper
function just bugged me. And I think the new code is much easier to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows the mobile UI to reflect the three states that the dive list can be
in:
- changes that haven't been written to local storage
- there potentially are changes in local storage that were not synced with the cloud
- dive list is in sync with cloud storage
The last state could be misleading if the user access the cloud from a
different device and makes changes to the cloud storage from there, but from
the point of view of this device, the states are consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we haven't connected at all to the cloud server we assume that there are
local changes. And whenever we save changes only locally, we also set that
flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If you pass in the repo name, it isn't treated as cloud storage, but simply as
local git storage and imported (i.e., added) to the current dive list.
This allows the user to work around failed no-cloud->cloud transitions, merge
different accounts, and most importantly deal with situations were conflicts on
the server caused us to move a cache out of the way and potentially make dives
that were on the mobile device inaccessible to the user.
Once a UI is added, this allows the user to recover those dives (realistically
this is not really all that potentially 'dangerous' to do, but it's definitely
something that would best be done after talking to someone who understands the
cloud storage and can guide the user...).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way QML can show those to the user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I could have sworn that I have fixed this several times in various places,
but apparently (as shown by todays support emails) it's still possible to
setup a mixed case email address. So let's try to solve this problem at
the very top.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In analogy to the timestamp -> QDateTime conversion, create a
common function.
1) For symmetry with the opposite conversion.
2) To remove numerous inconsistencies.
3) To remove use of the deprecated QDateTime::toTime_t() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
It appears that some misguided compiler / library combinations crash
on &vector[0] for empty vectors. Even though very unfriendly, they are
technically correct, so let's remove these constructs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Calling qApp->processEvents() in QMLManager::setNotificationText()
caused crashes, because it could lead to the context-menu that
initialized the call being deleted. Something that QML apparently
doesn't like.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
If the user switches away from Subsurface-mobile and back while we are
in our initialization phase, that code might run more than once leading
to undesirable results.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Berthold Stoeger