| Age | Commit message (Collapse) | Author |
|---|
|
This way even if a USB device wasn't added through an Android intent, we
still have a way to scan for it and select it. This is especially
important in case a user has a cable that we haven't seen yet (i.e. with
a VID/PID that we haven't added to Subsurface-mobile), but that
nevertheless works with the android usb serial drivers.
This also makes the flow a little more logical / consistent when
deciding which connections to show.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This dive computer hasn't been supported on Android in quite a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This finally allows us to download from not just the first device, but specifically
the device that the user picks.
Passing the object through a void pointer is not nice - but since this traverses
C code other solutions (like passing an index into the list) seemed even worse.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This vastly simplifies our handling of devive information as we simply use
what is already in the descriptor. This way we do not duplicate information
about USB devices in the QMLManager.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we explicitly open the download page after the use plugged in a USB
device, don't try to use guesses from the BT/BLE pairings to populate
the device/connection dropdowns.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just removes broken code. That file select dialog is still just a very
strange idea and should be revisited at some point.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we are switching between pages, the whole opacity mechanics make no
sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was a merge error in the dive list rewrite and brought in a code block that
had moved, which caused issues with correctly switching to the dive list.
Calling setupActions() moves to the diveListView (where it really belongs).
Instead of messing with the visibility of components of the same page, we now
simply switch out the shown page.
Fixes #2667
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A number of our messages were misleading in the no cloud case. This should help
to reduce confusion.
Adding the save_dives() call after creation of the repo appears to help us have
a valid repo in place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
The HID devices and the Atomics Aquatics Cobalt cannot work on Android
right now. We should claim to support them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I will (mis)use these for moving dives out of trips and to the trip above or
below and of course for undo/redo. And the weirdest one is the 'local offer'
icon that seemed a reasonably good fit to edit trip details.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The logic when we show the save button is a little fragile (and visually I'm not
sure I love the disabled button), but hey, this works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This creates up to two undo events. This seems like such a small issue that
it's not worth creating yet another undo command for this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For now this only shows the trip details. They can be edited on the page, but
there is no way to save those edits, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This doesn't show the dive specific actions and sets the stage for trip edit
actions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While this has worked fine for a long time, it now suddenly seems to trigger
crashes. So let's not do that (there are a number of discussions online that
talk about how this could indeed lead to BadThings(tm) happening.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A dive that is already in a trip can directly be moved into the trip above or
below.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the ability to delete a dive and to show its location on the map
directly from the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way one can execute dive list manipulations without the detour
to the dive details screen. For example you can long-press on a dive and then
add it to a trip or remove it from a trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The default policy closes the context drawer if there is a button release
outside the context drawer area. That messes with the intended UI. For us a
much more useful behavior is to have the next click outside of the drawer close
the drawer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This one exposes undo/redo as well as some basic trip manipulations, very similar
to what's already available on the dive details page. Except that here it also
makes sense to add a selected dive to a trip above or below (if those exist and
the dive isn't already in a trip).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now this is only available on the DiveDetails screen. The menu entries
are only enabled if there is such a trip to add the dive to (and if the dive
isn't already part of a trip).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This again uses an undo command and should be completely symmetrical to removing
a dive from a trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we remove the newest dive from its trip, it becomes inaccessible in the app,
but the dive data saved to disk appears to be correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In add and edit mode this is confusing and wrong.
There is a bug in Kirigami that creates lots of bogus error message about
missing mainFlickable. That needs to be patched out.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In some situations we ended up with the wrong location name. One way to
reproduce the problem was to edit an existing dive location to be a substring
of an existing location name. Save the dive, then immediately edit it again.
The wrong location would be filled in.
The code here looks strange and unnecessary, but it seems to fix the issue.
The aliases don't seem to make the code any easier to understand. This replaces
them in the case of the location combo box with direct accesses to the data on
the DiveDetailsEdit page. It may be worth removing all of them. The
locationModel alias was unused.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The undo and redo action actually work already.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we are using the existing command infrastructure, this isn't specific to
undoing a delete.
This commit renames the function and removes its use in the UI, the next commit
will then add the generic undo to the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is just pulling in the object so it can later be used on other pages.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since the divelist model is now placed on top of the common
models, we can directly reset the filter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since the selection is now handled in the core this is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Selection is now be handled by the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Command that just swaps two dives. This is rather complex,
as for example a dive site might be created.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This still has an odd bug. When we swipe the dive details to change the
selected dive and that action causes a trip to expand or collapse, then
the color change / highlight in the dive list isn't updated correctly,
even though the log file indicates that we made the necessary changes.
This also changes the coloring of the selected dive; having the same coloring
as a trip was very confusing. This is a bit stark, but it clearly communicates
the distinction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The UI for this is currently disabled (this was lost in the dive list rewrite).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That makes no sense anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The whole load from cloud thing will have to be audited. It appears
to me that there are way too many model resets...?
The only thing that is left is dive editing. Let's do that next.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using the model, copy the code we have in the desktop version
which manually creates a 15m/40min dive and passes that to the addDive
undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The next dive is automatically shown anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
After swiping through the dive list, select the currently visible dive.
Thus, the dive is highlighted in the overview pane.
The connection with the QMLManager feels atrocious, but I would prefer to have
as little logic in QML as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The core sets the current dive when undoing something.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The currently shown dive is now controlled by the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
MobileSwipeModel is probably not an ideal name, but all I could come up with.
One of the main complications here is that our list is reversed with respect to
the source model. We should change that one day. Probably by moving the
sorting down to the core-model.
Since looking up the source row is somewhat expensive, the lookup is cached for
a single entry because accesses come in bursts for a single dive. This should
be a good compromise and avoids keeping track of a full row-to-dive array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we want to add a second model, but not have to manage two models
everywhere, create a class MobileModels that contains both of the models. When
calling reset() on that class, it will reset both of the models, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
To unify mobile and desktop, let's use the current_dive variable
of the core to indicate the current dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a small step in unifying mobile and desktop.
I'm unsure whether it is correct to play this via the QMLManager or whether we
should call form QML directly into the model?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Robert C. Helling
Berthold Stoeger