| Age | Commit message (Collapse) | Author |
|---|
|
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is somewhat invasive as aborting the XML file read requires us to
report things up the recursive parsing chain.
What we really need to do here is to ask the user how they want to use the
data from reverse geo lookup. But for now we only warn about the fact that
this can take a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Note that I use the serial number as device ID as is done with the
Suunto DM5 import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I had some double profiles with slight differences in them, until I
realized that this was caused by including deleted dives in the import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't use the data coming from DiveMixture so removing the join. The
join did also generate extra rows of the same dive (with differing gas
info).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Using serial number as device ID here for simplicity. We also need the
DC info for the divecomputer tag per dive. And it seems that serial
number is in SerialNumber, SourceSerialNumber or both.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Seems that DM5 uses pascal as pressure unit for surface pressure.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Which means we report an error even if there wasn't a problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As the comment says, default to 12 liters if cylinder size is zero.
This is done only when cylinder has start pressure given.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
DM5 seems to have occasionally bogus data for cylinder start and end
pressures. Need to validate that.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When reading a pre-v3 XML file, we now do reverse geo lookups on the GPS
coordinates and add the country to the dive site notes. Eventually this
wants to be a tag (once we implement tags for dive sites).
This is going to add quite a bit of delay when people open a V2 XML file -
depending on how many distinct GPS fixes they have. In my case with 127
GPS fixes it took about 20 seconds to open the file...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When reading a v2 XML or git divelog it can happen that we get multiple
names for the same GPS fix or multiple GPS fixes for the same name. We'll
still consolidate them to one entry, but we should not throw away the
conflicting information - instead we should just add this to the notes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the dive site exists, we need to associate the uuid to current dive.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code was bogus as it used cur_dive->dc instead of cur_dc
(i.e., it always changed the first dive computer, even if the po2 was
found in a different one).
But fundamentally I consider this bogus. We are not doing the right thing
here - some dive computer send us pO2 values that are just the calculated
pO2 at a depth and NOT a setpoint, yet we pretend those are setpoints and
then turn these dives into CCR dives.
This needs to done differently.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the existing code worked with a couple of hand crafted examples it
turns out it did a poor job with most of my files. Oops.
Depending on whether we find name or coordinates first, we need to
identify existing sites in either case and do the right thing.
The challeng here are multiple dives at the same site with slightly
different GPS coordinates. If the name is read first, these all get merged
into one (and we warn about the different GPS data). But if GPS gets read
first, we create separate dive sites with the same name.
We need a sane UI to consolidate these - but we can't completely automate
this... it's possible that these ARE the same site and the GPS data is
just imprecise (for example, multiple dives at the same time with GPS
locations from the Subsurface companion app). The user should be able to
either pick one of the GPS locations, or keep multiple (for example,
different buoyes for the same site and you want to keep the different
markers).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the last few dozen commits change the format in irreversible ways
and could therefore be destructive and lose data for testers of the
development version, let's try to be extra careful and create "special"
backup files that aren't overwritten by subsequent backups. At least this
way people can go back to the previous state.
Of course people using the git backend don't have to worry about this as
they always can go back to any earlier save.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Clearly I didn't run into these before in my testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Sometimes we want to create a dive site just based on a name, sometimes we
have both a name and GPS coordinates. Let's make a helper for either case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Read and write divesite sections in the XML file.
Read divelogs of version 2 and create dive site structures on the fly.
Read version 3 files that have divesiteid instead of location / gps.
Saves version 3 files where dives no longer have location and gps but
instead refer to a divesiteid
The commit contains quite a few fprintf(stderr,...) in order to allow
better monitoring of the parsing / transforming of locations and gps to
dive sites. This will need to be removed later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As i thought, only 3 bits there where dive mode. Only look at those.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The events we decode from DLF file are divided between log record types
(1 through 5). Thus we need to parse the events from all of these record
types.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This triggers the rest of the code to treat the sensor value as our
ppO2 value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Previous code mapped all our free dive inputs to OC, but now when we
actually have a FREEDIVE divemode, we can do better.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... and repair a failed rebase (sorry).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will allow us to download the dives from the dive computer into a
separate table just for that purpose and not into the main dive_table.
I really dislike the code that's in place that dates back to the very
earliest code written for Subsurface. Dumping the dives straight into the
main dive_table seems really stupid to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
This imports the ceiling information as stopdepth, our way of showing a
ceiling.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These decodings and constants makes the numbers line up perfectly with
the numbers presented on wetnotes.com.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The units of these values are guessed, but these values makes they match
up well with the values we calculate ourself.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This decodes the ppO2 value stored in the DLF files. It looks like the
DiveSoft Freedom computers always stores the ppO2 value, even for OC
dives.
This import only stores the ppO2 value from CCR and PSCR dives, where
these values comes from sensors and makes sense to store.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use the new and fancy cylinder idx to record which cylinder we change to
on the DLF import.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These event types and names where found by sending different data to the
wetnotes.com web page.
I couldn't find where the setpoint settings where stored for the
SP-events, but when looking at the web page, it was clearly stating that
it saw a setpoint of 0.0 bar somewhere in there.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This event type is found in the DLF file Robert got sent. The wetnotes
application can't display files containing this event type.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And this encodes helium part to in the gaschange.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There are more event types than 1, so parse that as a unsigned char and
not as a bool.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
Dirk Hohndel
Miika Turkia
Lubomir I. Ivanov
Anton Lundin