| Age | Commit message (Collapse) | Author |
|---|
|
Now, that we have this helper function that should have been
introduced long ago, we can make some more expressions
more idiomatic.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The goal here is to make it possible to detach the pressure related
data from the plot_info structure. Thus, the pressure related data
can be allocated independently depending on the number of cylinders
per dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When keeping track of cylinder related data, the code was using
static arrays of MAX_CYLINDERS length. If we want to use dynamically
sized cylinder arrays, these have to be dynamically allocated.
In C++ code, this is trivial: simply replace the C-style arrays
by std::vector<>. Don't use QVector, as no reference counting or
COW semantics are needed here. These are purely local and unshared
arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The planner can produce negative cylinder pressures when
more gas is used than available. Let's color the pressure
graph in a highly visible color to alert the user of the
fact that current gas planning is insufficient.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
There is absolutely no reason to use a macro here.
The only argument that can be made is consistency with
the other pressure-macros, but those too are questionable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
At some places we use UTF8 string literals. Therefore, we effectively
only support UTF8 build systems. We might just as well remove all
the other UTF_* macros and use direct string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Remove a few cases of
void fun() {
...
}
While touching these functions, fix a few other whitespace
coding style violations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Found via LGTM.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Update connect calls to use Changed from qPref, due to QML demands
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Commit f5b11daffd6f240268ce78d72c64be43670988ea changed gasmix
arguments and return values to be passed by value instead of
using pointers.
Notably, get_gasmix() is fed a default-value and returns a
new value. In the old code, NULL was passed in in a first
loop iteration and non-NULL was always returned in the first
iteration. Thus, an equality comparison of passed-in an
returned gasmix would always fail in the first loop iteration.
The new code passed in air as default. Now if air was also
returned, then the matching gases were not calculated in
calculate_sac(). To revert to the old behavior, pass in
an invalid gasmix.
Moreover, give names to the invalid and air gasmixes.
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
These were pointers into the global prefs object. The user must
not use these to modify the settings, therefore make them
pointers-to-const.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is another entry in the series to make more things
"const-clean" with the ultimate goal of merge_dive() take
const pointers.
This concerns functions taking pointers to events and
the fallout from making these const.
The somewhat debatable part of this commit might be
that get_next_event() is split in a two distinct
(const and non-const) versions with different names,
since C doesn't allow overloading. The linker should
recognize that these functions are identical and remove
one of them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Currently, get_gasmix_from_event() and get_gasmix() return pointers
to either static or to (possibly changing) dive data. This seems like
a dangerous practice and the returned data should be used immediately.
Instead, return the gasmix by value. This is in preparation of
const-ifying input parameters of a number of core functions, which
will ultimately let the merge() function take const-arguments in
preparation of undo of dive-merging.
On common 64-bit systems gasmix (two "int"s) is the size of a pointer
and can be returned in a register.
On 32-bit systems a pointer to the struct to be filled out will be
passed.
Since get_gasmix() now returns a value, the first invocation is
tested by a NULL-initialized "struct event *". Document this in
a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
remove TechnicalDetails from SettingsObjectWrapper and reference qPrefTechnicalDetails
update files using SettingsObjectWrapper/TechnicalDetails to use qPrefTechnicalDetails
this activated qPrefTechnicalDetails and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Unused parameters in C++ are "silenced" by removing the name.
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
C++ permits use of parameters without name, which signals unused
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Of course, quite a few of them indirectly get it through other header
files.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Bring one more value plus unit pair which is the pressure value printed
in the profile in accordance with the coding style/UI style rule of
not having a space between value and unit.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
CID 208332
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
current_dc is a macro that determines the dive computer
based on the current dive number. When the planner is started
from an emtpy dive list, the dive number ends up being -1 and
that doesn't produce a valid dive computer. Use the divecomputer
of the displayed_dive instead. This is done via a macro that
can also be used in two other places. Without this patch, the
planner crashed when called on an empty dive list.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
To compute the heatmap value, we need the current gasmix but
the current cylinderindex is no longer available.
Fixes #562
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
When I massaged the code to do multiple gas pressures in commit e1b880f4
("Profile support for multiple concurrent pressure sensors") some of the
Y offsetting code got cut out as being too specific to the old
o2pressure code.
But I removed a bit too much, leaving the label (gas name) and number
(gas pressure) overlapping.
This should fix it.
If we really care about multiple gas pressure labels overlapping each
other, we'll have to revisit this code, but the old two-gas case didn't
do a very good job either (both that old code - and this new version -
can look very good in particular cases, but there are cases where it
won't work so well).
So we may need to revisit this eventually, but this gets it looking fine
for the normal cases.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now that the cylinder pressures are more generalized, we should show
them even for non-CCR dives if we have them. The most notable example
would be having separate pressure transmitters for both cylinders in a
sidemount setup. The code no longer really depends on any CCR logic.
NOTE! This is still preparatory work, in that this is one part of
supporting multiple simulataneous cylinder pressures, but we are still
lacking in other departments (eg properly filling those fields in when a
dive computer exports multiple pressure sensors etc).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the planner, the SAC is prescribed, so there is little
use in plotting it (as the color of the cylinder pressure
line). Rather use the color to show the density of breathing
gas.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Color the p02 graph also in red for going under the minumum p02 value as
set in the Preferences.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
|
|
|
|
Enable translation for a few additional internal dive events.
Ensure that all event names in datatrak.c are collected for translation.
Ensure that for gaschange in profile info box the "cyl." string is also translated.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
...by making the pen start at its first position rather
than first position minus half width.
Sorry for my first attempt to solve this in a totally
differen (read: wrong) way.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Remove a few uneeded lines and add more loading code for
the preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Stretch out the yellow zone of the HSV scale, because the yellow band of the
true scale appears narrow.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Color "undersaturated" values relative to inert gas pressure of gas being
breathed, rather than relative to inert gas pressure of air.
Also change slightly the point at which bright green (hue = 120 deg) from 10%
of M value to 0% of M value (=ambient pressure).
Other than the slight shift in lower bound of the green-red scale, this does
not affect the colors of the tissues with inert gas pressure greater than
ambient pressure, which are relative to the Buhlmann M value.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By drawing oversize dots for each data point, dots were overlapping such that
the change in tissue presssure wasn't displayed at the right time - typically
out by 1-2 minutes, depending on dive duration.
Drawing a line between discrete points, the data points don't overlap and
change in tissue pressure is displayed at the right time.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This got broken a long time ago it seems and no one ever noticed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I separated out the color scaling and slightly simplified the expressions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Setting the pen to non-cosmetic means the painted width scales when zoomed
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make the heat map use a colour scale similar to that by Kevin Watt, as used in
Simon Mitchell's presentation, Decompression Controversies
https://www.youtube.com/watch?v=UY61E49lyos&t=2090&authuser=0
Undersaturated: cyan -> blue ->purple -> black
Supersaturated up to M value: black -> yellow -> red
Exceeding M value: red -> white
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
willemferguson
Berthold Stoeger
Dirk Hohndel
jan Iversen
jan Iversen
Stefan Fuchs
Jan Mulder
Linus Torvalds
Jeremie Guichard
Martin Měřinský
Tomaz Canabrava
Rick Walsh