| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having both the dive list (the vertical list) and the sequence of dive
details (the horizontally swipe-able list) named the same caused me
endless confusion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now the UI shows "--" as place filler for empty data. That may or
may not change - but while it's there, we should not store that string in
the corresponding string fields of the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #997
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This causes all profiles to be rendered which is a massive performance
concern.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Because dives in 1912 are unlikely to be added to my dive log...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As per Tomaz recomendation the helper functions from 19588ce and e072596
are moved from qmlmanager to DiveObjectsHelper.
[Dirk Hohndel: merged with the latest code]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code inexplicably always checked for a gps location. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now the layout flows again and shouldn't cause clipping on the right
(unless the user has excessively long, unbreakable words it seems.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The way sectioning of the dive list works is by watching for different strings
in the section.property. In order to be able to tell different trips apart we
combine the address of the dive trip variable with the location (which will
create a new section for a new trip, even if the location text is the same) and
then strip that information out before showing the trip header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I was having really ugly fonts here and I actually blamed
QML for that (while I still think it is it's fault), but we
where using pixel fractions. So every time we may hit a pixel
fraction, round that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we are short on space on the mobile version, lets just show "Multiple" if
a dive has multiple cylinders.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Helper function that retrieved the total weight for a dive to be displayed
on the DiveDetials page.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Helper function that retrieves the cylinder description to be displayed in the
DiveDetails. Only the first cylinder for a dive is retrieved.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After adding "Cylinder" to the DiveDetails page the objects had to be rearranged
in order to better utilise the space.
To get a cleaner look on smaller screens the left side is left aligned and the
right side is right aligend.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Patch #2 that formats the table to be used for downloaded dives.
Signed-off-by: Willem Ferguson <willem@localhost.localdomain>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a proposal for the layout of this page and which may be
useful during further development of the download code.
Signed-off-by: Willem Ferguson <willem@localhost.localdomain>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I guess the Dive list item will be accessed more often
than the preferences item, so put it to to. Also remove
the "back to" prefix.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a multi-part message in MIME format.
After fixing the regression (commit 9e9d220c9803) strange double dashes
appeared in the Divelist headers for trips. Just suppress it.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If one browses the application more than one step (e.g. details, gps fix
list and preferences), we need to pop the stack a bit more to get back
to the dive list. This will clear the whole stackView as I saw no harm
in discarding the history when one jumps back to the dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Pressing of buttons were difficult to see mainly due to small buttons
and small color distance between pressed and un-pressed state. This fix
enlarges the buttons a little, and choses a different color for
the pressed state.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As asked for on the mailinglisrt, a menu item is added to return
to the Divelist the easy way. In addition to the standard Android
back button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems a bit brute force but I couldn't get the width to propagate
correctly any other way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This once again displays trips in the dive list and makes the visual a bit more
spaceous.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 6540e95425eb ("dive details navigation") the change to access the gps
variable was only partially implemented.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this edit seems to work again. The edit page can be scrolled around on
smaller screens to allow editing every part of it and to allow the user to
press the "save" button.
This is mainly intended to make sure testing can continue - it's unclear if
this will be the final design.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We keep losing the time when people move code around. date really is just the
date and doesn't include the time component.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were comparing apples to oranges on a few items and therefore more or less
always assumed that a dive had been modified.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If unit_system is set to imperial, we need to set the units explicitly
on mobile application.
Fixes #993
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's not recommended to set the height explicitly of an item in a layout. Use
Layout.preferredHeight instead
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Commit f3f7930 introduced a more attractive button style to the start page.
This patch turns it into its own type so it can easily be used everywhere.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Those plain rectangular buttons were just too ugly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It is not recommended to set the width explicitly of items in a layout. This
caused some issues in DiveDetailsView, which were fixed by commit 1030cb2.
See http://doc.qt.io/qt-5/qml-qtquick-layouts-layout.html#details
Set 'Layout.preferredWidth' instead of 'width' for GpsList and Preferences
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I want a prettier visual for those, anyway, but artificially making them
shorter than that text they display seems silly - and causes the text to be
trunkated for no good reason on some devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is based on post by Ben Laud
https://medium.com/@benlaud/complete-guide-to-make-a-splash-screen-for-your-qml-android-application-567ca3bc70af
It creates a theme that uses a splash drawable that Android will show
immediately when the application is launched. And then starts the QML
application with visibility set to false adn only makes it visible (and replace
the splash screen) once initialization is finished.
We still get a little flicker with the switch from splash to start page to dive
list, but over all the experience is hugely improved. And the bug that the
splash screen stays around when starting Subsurface-mobile in landscape also
appears to be fixed.
Fixes #994
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This prevents having the edit drawer opened at a different than the
current dive.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
|
|
In dive details view, shifting the dive number to the right of the top row
means it won't be cut short if the dive duration is 1 hr or longer
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This one appears to work in my testing so far. And reading the code it
seems to make sense. We look at the size that the widget thinks it is. And
we scale the scene to fill that size (including a margin). And then let Qt
and QML deal with the rest of it. Assuming this works it shows that we
have been trying too hard all this time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems to be much more logical to address the size and scale right
before rendering.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Different approach here:
- profile gets a bit higher, this was requested on the mailinglist, and
seems to behave much better with the painted profile, we'd otherwise
get it magically clipped on the right hand side.
- Make the scaling dpi aware, this fixes scaling for me on the Nexus7, I
haven't been able to test it properly on other devices, so this needs
some more testing. The result is visually quite close to what we can
do, although I'm still getting a somewhat larger margin on the right.
To get at the devicePixelRatio without too much custom code, I've
added a property to the QMLProfile to retrieve it from the theme engine.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- Apparently, QMLProfile doesn't like being painted without being
visible, when flicking quickly through the dives I would get empty
rendered profiles. Setting the cachebuffer to zero fixes it, and saves
some memory.
It still has some unfortunate timing, the profile gets rendered
mid-flick, which leads to a delay in the flicking motion, quite
annoying. We will have to somehow make sure that new profiles are
rendered after flicking, not during
- Smallish cleanups
Signed-off-by: Sebastian Kügler <sebas@kde.org>
|
|
- stop at bounds, this is in line with other flickables. I really
don't like Flickables floppy default behavior to allow dragging and
scrolling over the bounds.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- As the list may get reset on save, the dive_id effectively changes
since currentItem isn't updated. So after editing, we end up with a
different currentItem than visible. This is very unintuitive, but
has to do with the model resetting. It would result in the edit view not
showing the current dive when opened the second time. Let's make sure
that out currentItem is always the visible one before we're filling
the data into the edit page.
- Close the drawer when we're navigating away from the dive item, for
example when hitting the back button.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
|
|
Apparently parent.height is negative sometimes.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
|
Dirk Hohndel
Joakim Bygdell
Tomaz Canabrava
Willem Ferguson
Henrik Brautaset Aronsen
Jan Mulder
Miika Turkia
Rick Walsh
Sebastian Kügler