| Age | Commit message (Collapse) | Author |
|---|
|
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When adding a dive manually, you might clear the "duration" field and fill
in your value by hand. Unfortunately, commit #1052 produced a bug that
practically limited the dive duration to 6 minutes once the field was cleared.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
|
|
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
In the planner, this is the natural assumption.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This patch allows the planner to save the last manually-entered
dive planner point of a dive plan. When the plan has been saved
and re-opened for edit, the time of the last-entered dive planner
point is used to ensure that dive planning continues from the same
point in the profile as was when the original dive plan was saved.
Mechanism:
1) In dive.h, create a new dc attribute dc->last_manual_time
with data type of duration_t.
2) In diveplanner.c, ensure that the last manually-entered
dive planner point is saved in dc->last_manual_time.
3) In save-xml.c, create a new XML attribute for the <divecomputer>
element, named last-manual-time. For dive plans, the element would
now look like:
<divecomputer model='planned dive' last-manual-time='31:17 min'>
4) In parse-xml.c, insert code that recognises the last-manual-time
XML attribute, reads the time value and assigns this time to
dc->last_manual_time.
5) In diveplannermodel.cpp, method DiveplannerPointModel::loadfromdive,
insert code that sets the appropriate boolean value to dp->entered
by comparing newtime (i.e. time of dp) with dc->last_manual_time.
6) Diveplannermodel.cpp also accepts profile data from normal dives in
the dive log, whether hand-entered or loaded from dive computer. It
looks like the reduction of dive points for dives with >100 points
continues to work ok.
The result is that when a dive plan is saved with manually entered
points up to e.g. 10 minutes into the dive, it can be re-opened for edit
in the dive planner and the planner re-creates the plan with manually
entered points up to 10 minutes. The rest of the points are "soft"
points, shaped by the deco calculations of the planner.
Improvements: Improve code for profile display in dive planner
This responds to #1052.
Change load-git.c and save-git.c so that the last-manual-time is
also saved in the git-format dive log.
Several stylistic changes in text for consistent C source code.
Improvement of dive planner profile display:
Do some simplification of my alterations to diveplannermodel.cpp
Two small style changes in planner.c and diveplannermodel.cpp
as requested ny @neolit123
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
|
|
For code consistency, substitute boolean expressions:
s && *s -> !empty_string(s)
s && s[0] -> !empty_string(s)
!s || !*s -> empty_string(s)
!s || !s[0] -> empty_string(s)
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Move divepicturemodel.cpp to the desktop only category and deal
with the (limited) fallout. We, currently, do not support dive
pictures tied to the profile on mobile, so there is no use
including this code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Do not pull in the DivePlannerPointsModel::instance as this is not
used in the called function. We (currently) do not support deco
computations on mobile, so trying to pull in any deco state from
the planner is futile anyway.
With this uncoupling, 6 more model files are not needed in mobile
any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
For a long time, I did not realize that a lot of qt-models are only
used in the mobile app, or only used in the desktop application.
This commit splits the qt-models in 3 parts. Used in both mobile and
desktop, used in desktop only, used in mobile only.
There is no other code change in here, other than cmake changes.
To me, this gives at least developers more insight where code is
actually used, and there is a small benefit in footpoint.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Instead of writing TODO comment blocks, just do the work, and move the
function to the proper class. Further, after review from Berthold, cleanup
the function. There is no reason that getGasList() is member of
any class. It is just a non-class helper, and as it is only used
here, a static helper.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
When deleting a dive from the divelist model, also free the
pointed to DiveObjectHelper data. There seems no harm done
(other than a memory leak) by this missing free.
Found while (again) investigating the infamous crash occuring
when deleting a dive from the mobile app when deleting a dive
from the dive list.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
See also commit c032006d91ee3c. Compare functions passed
to sort functions need to compare for less-than and not
less-or-equal.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
CID 45184
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
CID 208317
CID 208325
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
CID 208318
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
CID 208296. IndexOf can return -1 when not found, which will
not happen in this context, so just to silence Coverity.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
With commit 5962f00679fae555, a well known problem was introduced.
Incorrect width setting for the spanning trip lines. And as there
is even a specific functon for that, just call this.
The reason the mentioned commit introduces this, is that
invalidate() causes layoutChanged signals, and invalidateFilter()
does not.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This is mainly code maintenance. Instead of emitting explicit
dataChanged signals, we can make sure that setStringList()
is called after all model data manipulation is ready. Accoording
to the Qt docs: "The model will notify any attached views
that its underlying data has changed".
In itself, this does not solve the tripped assert mentioned in
commit 5962f00679fae5, but this calling at the end just feels
better.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This "bug" is found using Qt 5.10 compiled in developer mode. Access
the filers, click a little around here, close the filters. Almost every
time the following assert is triggered:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex:
"persistent model indexes corrupted", file itemmodels/qabstractitemmodel.cpp, line 643
This is relatively deep down in Qt, and it is triggered by clearing the
filters. Trying to force a crash when using the same scenario in Qt 5.10
compiled for production (so no active asserts) did not result in a crash.
So, upto this time, it is unclear if the Qt assert points out a real problem,
or it is some false alarm (for whatever reason).
Further investigation shows that the assert can be solved by changing the
invalidate() to an invalidateFilter(). Indeed, the last variant is a little
more lightweigt, and does seem to do the same job from a functional point
of view (in this case).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
FilterModelBase is a direct subclass of QAbstractItemModel. Therefore,
dynamic_cast<>ing the former to the latter is unnecessary. Probably
an artifact of previous code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Coverity CID 215199
Coverity CID 215195
Coverity CID 215196
Coverity CID 215198
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Introduce toggle buttons which mean "filter all dives except
those fulfilling the selected criteria".
The old code used to check for rowCount() == 0. This should never happen,
because there is always a row "empty field". This check was moved into
the preamble of the functions to seperate it from the actual logic.
Fixes #435
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There was a curious pattern of singletons being implemented based on
QScopedPointer<>s. This is an unnecessary level of indirection:
The lifetime of the smart pointer is the same as that of the
pointed-to object. Therefore, replace these pointers by the respective
objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
We aren't really consistent. And I don't do this often enough. But based
on a few things that I saw in a recent commit, I wanted to at least fix
those. And then of course fixed everything in those two files.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Found while compiled against Qt 5.10 build from source. The assert
Q_ASSERT(last >= first) is trapped by this beginInsertRows in
case there are no pictures. Just do not call this when there are
no pictures.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
To every filter list add a menu button that allows selection of all,
selection of none or inversion of selection.
Implements #435.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The *FilterModels had a number of of virtual functions, which only
accessed members of the base class. Moreover, these functions were
identical and generated with macros. Therefore, move these functions
to the base class.
The one excption is data(), which uses different count functions
(passed as a macro parameter). Thus, introduce a virtual countDives()
function and likewise move data() to the base class. A function pointer
might be even more clear, but since the rest of the code/Qt relies
heavily on runtime polymorphism, let's do the same here.
The only macros left are those creating the singleton accessors.
This could be more clearly realized by templates, but let's
likewise keep it the way is.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There were two classes, MultiFilterInterface and FiterModelBase.
The latter derives from the former and from QStringListModel.
The former was not used anywhere else. Moreover, in contradiction
to its name, MultiFilterInterface is not an interface (in the Java
sense), because it actually has (non-virtual) data members. All in
all, the data model is very weird.
Merge these two classes, since there seems to be no gain whatsoever
from keeping MultiFilterInterface separate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
The more complex handling is no longer needed because:
- Keyboard tracking for gfhigh/low UI fields was switched off here:
030c094854aeab4aaade523d7126728d9ce98a5b
- GFhigh was limited to 40 here:
53fffe0ce3696de33ce4657e20d295e4a43e0fd9
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Commit 6343515fedbc43be4fd2cb3f1b3fea384e362c59 introduced equality
instead of substring comparison for filters. This broke the buddy
filter in the case of more than one buddy, because in such a case
the buddy list is a comma-separated string.
Fix this by splitting the buddy string, trimming the individual
strings and search in the list.
Fixes #969
Reported-by: <yrevawerd@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This implements different zoom levels for the dive photos tab as
suggested by Stefan Fuchs <sfuchs@gmx.de> in #898.
The zoom level can be changed using a slider or CTRL+mousewheel.
Zoom levels range from a third of the standard thumbnail size to
thrice the standard thumbnail size.
Thumbnails are cached in maximum resolution and scaled down on
the fly. Because the profile widget took its pictures from the
photo list model, an extra picture copy with a fixed size had
to be introduced.
The UI is still a bit crude.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The constructor and the list of pictures was protected, but the
class neither had friends nor subclasses (a subclass was removed
in a recent commit).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
It was only used by the DivePictureModel class, no need to export it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Correct way of using indices for rowDDstart and rowDDend.
Reset rowDDstart and rowDDend at beginning of updating dive pictures.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
See issue #875. In hindsight the reason for this bug is easy to
understand. When updating a dive, the dive was first removed
from the model, and added in its new state again. This does seems
resonable, but the delete in the model causes the internal (QML)
state to be changed, and the previous state (like the currentIndex
that was pointing to the just deleted row, so that one is changed to
something valid internally) is not restored at recreation of
the edited dive. The QML engine has no way to understand that
the remove and subsequent add are in fact one atomic operation.
This can be solved by simply updating the underlying data in
place, and notifying the change using a dataChanged emitted
signal. The dataChanged signal takes care of the repaint of
the screen, and there is no need for removeRow/insertRow pairs.
Fixes: #875
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
In the dive picture tab show pictures of all selected dive.
But at the same moment take care that in the profile only
pictures from displayed_dive are displayed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
The removed comment in qt-models/divepicturemodel.h described
todo items which were already implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The thumbnailing in qt-models/divepicturemodel.cpp was performed
concurrently, but the thumbnailCache was not protected from races.
Resolve this by guarding the thumbnalCache accesses with mutexes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The code of DivePictureModel used a QHash to keep track of thumbnails.
Not only was the code rather complex - it also had the consequence that
pictures are sorted according to the hash function, i.e. seemingly
random.
This commit replaces the QHash by a simple QList which keeps track
of thumbnails and some meta-data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Note that constructs like QList<QFuture<void>> is incompatible with
pre-C++11 compilers. But the code base is so full of C++11isms that
we may just as well remove asymmetric eye-sores of the kind
"QList<QFuture<void> >".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Berthold Stoeger
Oliver Schwaneberg
Jan Mulder
Robert C. Helling
Willem Ferguson
Dirk Hohndel
Stefan Fuchs